IDEAS home Printed from https://ideas.repec.org/a/eee/tefoso/v163y2021ics0040162520312403.html
   My bibliography  Save this article

A systems representation of the Circular Economy: Transition scenarios in the electrical and electronic equipment (EEE) industry

Author

Listed:
  • Guzzo, Daniel
  • Rodrigues, Vinicius Picanço
  • Mascarenhas, Janaina

Abstract

The electrical and electronic equipment (EEE) industry requires a Circular Economy (CE) transition, and decision-makers need support to deal with the complexities of such change. The goal of this research is: (1) providing an SD-based conceptual model for CE systems that clarifies their potential for decelerated flow of resources; (2) providing a simulation model that enables gaining knowledge of the effects of the implementation of CE strategies on nationwide stocks and flows of EEE; and (3) discussing the capabilities of such a model to facilitate CE transitions. The System Dynamics (SD) methodology is used to conceptualise and operationalise CE systems grounded on adjacent theories as industrial ecology (IE) and sustainability transitions. In this research, the resulting Circular EEE SD Model used data from publicly available sources to represent the long-term (1980–2050) adoption of flat display panel TVs in the Netherlands in different scenarios. Diverging restoration infrastructure levels and diverging product lifetimes were examined. Results show that although no scenario led to full eco-economic decoupling, the Circular EEE SD Model enables decision-makers to create “what-if” scenarios to test their assumptions about the potential effects of CE strategies to achieving transitions. The model is fully available for verification, modification, and use.

Suggested Citation

  • Guzzo, Daniel & Rodrigues, Vinicius Picanço & Mascarenhas, Janaina, 2021. "A systems representation of the Circular Economy: Transition scenarios in the electrical and electronic equipment (EEE) industry," Technological Forecasting and Social Change, Elsevier, vol. 163(C).
    • Handle: RePEc:eee:tefoso:v:163:y:2021:i:c:s0040162520312403
    DOI: 10.1016/j.techfore.2020.120414
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0040162520312403
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.techfore.2020.120414?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fenna Blomsma & Geraldine Brennan, 2017. "The Emergence of Circular Economy: A New Framing Around Prolonging Resource Productivity," Journal of Industrial Ecology, Yale University, vol. 21(3), pages 603-614, June.
    2. Cucchiella, Federica & D’Adamo, Idiano & Lenny Koh, S.C. & Rosa, Paolo, 2015. "Recycling of WEEEs: An economic assessment of present and future e-waste streams," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 263-272.
    3. Senge, Peter M. & Sterman, John D., 1992. "Systems thinking and organizational learning: Acting locally and thinking globally in the organization of the future," European Journal of Operational Research, Elsevier, vol. 59(1), pages 137-150, May.
    4. Masahiro Oguchi & Shinsuke Murakami & Tomohiro Tasaki & Ichiro Daigo & Seiji Hashimoto, 2010. "Lifespan of Commodities, Part II," Journal of Industrial Ecology, Yale University, vol. 14(4), pages 613-626, August.
    5. Walter R. Stahel, 2016. "The circular economy," Nature, Nature, vol. 531(7595), pages 435-438, March.
    6. Shinsuke Murakami & Masahiro Oguchi & Tomohiro Tasaki & Ichiro Daigo & Seiji Hashimoto, 2010. "Lifespan of Commodities, Part I," Journal of Industrial Ecology, Yale University, vol. 14(4), pages 598-612, August.
    7. Bernhard Truffer & Lars Coenen, 2012. "Environmental Innovation and Sustainability Transitions in Regional Studies," Regional Studies, Taylor & Francis Journals, vol. 46(1), pages 1-21, November.
    8. Daniel Guzzo & Adriana Hofmann Trevisan & Marcia Echeveste & Janaina Mascarenhas Hornos Costa, 2019. "Circular Innovation Framework: Verifying Conceptual to Practical Decisions in Sustainability-Oriented Product-Service System Cases," Sustainability, MDPI, vol. 11(12), pages 1-29, June.
    9. Frank M. Bass, 1969. "A New Product Growth for Model Consumer Durables," Management Science, INFORMS, vol. 15(5), pages 215-227, January.
    10. Andrew M. King & Stuart C. Burgess & Winnie Ijomah & Chris A. McMahon, 2006. "Reducing waste: repair, recondition, remanufacture or recycle?," Sustainable Development, John Wiley & Sons, Ltd., vol. 14(4), pages 257-267.
    11. Trevor Zink & Roland Geyer, 2017. "Circular Economy Rebound," Journal of Industrial Ecology, Yale University, vol. 21(3), pages 593-602, June.
    12. Marcel C. Hollander & Conny A. Bakker & Erik Jan Hultink, 2017. "Product Design in a Circular Economy: Development of a Typology of Key Concepts and Terms," Journal of Industrial Ecology, Yale University, vol. 21(3), pages 517-525, June.
    13. Leen Gorissen & Karl Vrancken & Saskia Manshoven, 2016. "Transition Thinking and Business Model Innovation–Towards a Transformative Business Model and New Role for the Reuse Centers of Limburg, Belgium," Sustainability, MDPI, vol. 8(2), pages 1-23, January.
    14. Zhaohua Wang & Bin Zhang & Dabo Guan, 2016. "Take responsibility for electronic-waste disposal," Nature, Nature, vol. 536(7614), pages 23-25, August.
    15. Govindan, Kannan & Soleimani, Hamed & Kannan, Devika, 2015. "Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future," European Journal of Operational Research, Elsevier, vol. 240(3), pages 603-626.
    16. Elmahdy, Emad E., 2015. "A new approach for Weibull modeling for reliability life data analysis," Applied Mathematics and Computation, Elsevier, vol. 250(C), pages 708-720.
    17. David C Lane, 2000. "Diagramming conventions in system dynamics," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 51(2), pages 241-245, February.
    18. Thomas Spengler & Marcus Schröter, 2003. "Strategic Management of Spare Parts in Closed-Loop Supply Chains—A System Dynamics Approach," Interfaces, INFORMS, vol. 33(6), pages 7-17, December.
    19. Jonathan Köhler & Fjalar de Haan & Georg Holtz & Klaus Kubeczko & Enayat Moallemi & George Papachristos & Emile Chappin, 2018. "Modelling Sustainability Transitions: An Assessment of Approaches and Challenges," Journal of Artificial Societies and Social Simulation, Journal of Artificial Societies and Social Simulation, vol. 21(1), pages 1-8.
    20. de Gooyert, Vincent & Rouwette, Etiënne & van Kranenburg, Hans & Freeman, Edward & van Breen, Harry, 2016. "Sustainability transition dynamics: Towards overcoming policy resistance," Technological Forecasting and Social Change, Elsevier, vol. 111(C), pages 135-145.
    21. Michael Waldman, 2003. "Durable Goods Theory for Real World Markets," Journal of Economic Perspectives, American Economic Association, vol. 17(1), pages 131-154, Winter.
    22. Walrave, Bob & Raven, Rob, 2016. "Modelling the dynamics of technological innovation systems," Research Policy, Elsevier, vol. 45(9), pages 1833-1844.
    23. Lu, Chao & Liu, Hu-Chen & Tao, Jie & Rong, Ke & Hsieh, Ying-Che, 2017. "A key stakeholder-based financial subsidy stimulation for Chinese EV industrialization: A system dynamics simulation," Technological Forecasting and Social Change, Elsevier, vol. 118(C), pages 1-14.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Naveen Virmani & Prateek Saxena & Rakesh D. Raut, 2022. "Examining the roadblocks of circular economy adoption in micro, small, and medium enterprises (MSME) through sustainable development goals," Business Strategy and the Environment, Wiley Blackwell, vol. 31(7), pages 2908-2930, November.
    2. Gnekpe, Christian & Plantec, Quentin, 2023. "Regulatory push-pull and technological knowledge dynamics of circular economy innovation," Technological Forecasting and Social Change, Elsevier, vol. 196(C).
    3. Vasile Dinu & Giani Ionel Gradinaru & Alin Cristian Maricut & Bogdan Florin Matei, 2023. "The Role of Innovation and New Technologies in Closing the Economic Circuit of Electrical and Electronic Equipment," The AMFITEATRU ECONOMIC journal, Academy of Economic Studies - Bucharest, Romania, vol. 25(62), pages 1-12, February.
    4. Ioannis Kostakis & Konstantinos P. Tsagarakis, 2022. "Social and economic determinants of materials recycling and circularity in Europe: an empirical investigation," The Annals of Regional Science, Springer;Western Regional Science Association, vol. 68(2), pages 263-281, April.
    5. Radu Ciobanu & Drago? Huru & George ?tefan & Margareta Florescu & Danut Mihai & Florin Dobre, 2023. "Investigating Determining Factors Affecting the Waste Collection Rate From Electrical and Electronic Equipment," The AMFITEATRU ECONOMIC journal, Academy of Economic Studies - Bucharest, Romania, vol. 25(62), pages 134-134, February.
    6. Dhiya Durani Sofian Azizi & Marlia M. Hanafiah & Kok Sin Woon, 2023. "Material Flow Analysis in WEEE Management for Circular Economy: A Content Review on Applications, Limitations, and Future Outlook," Sustainability, MDPI, vol. 15(4), pages 1-22, February.
    7. Rodríguez, Rosa M. & Labella, Álvaro & Nuñez-Cacho, Pedro & Molina-Moreno, Valentin & Martínez, Luis, 2022. "A comprehensive minimum cost consensus model for large scale group decision making for circular economy measurement," Technological Forecasting and Social Change, Elsevier, vol. 175(C).
    8. Leticia Sarmento dos Muchangos, 2022. "Mapping the Circular Economy Concept and the Global South," Circular Economy and Sustainability, Springer, vol. 2(1), pages 71-90, March.
    9. Ahmad, Farhan & Bask, Anu & Laari, Sini & Robinson, Craig V., 2023. "Business management perspectives on the circular economy: Present state and future directions," Technological Forecasting and Social Change, Elsevier, vol. 187(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Florian Lüdeke‐Freund & Stefan Gold & Nancy M. P. Bocken, 2019. "A Review and Typology of Circular Economy Business Model Patterns," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 36-61, February.
    2. Kirchherr, Julian & Piscicelli, Laura & Bour, Ruben & Kostense-Smit, Erica & Muller, Jennifer & Huibrechtse-Truijens, Anne & Hekkert, Marko, 2018. "Barriers to the Circular Economy: Evidence From the European Union (EU)," Ecological Economics, Elsevier, vol. 150(C), pages 264-272.
    3. Nancy Bocken & Lars Strupeit & Katherine Whalen & Julia Nußholz, 2019. "A Review and Evaluation of Circular Business Model Innovation Tools," Sustainability, MDPI, vol. 11(8), pages 1-25, April.
    4. Chembessi Chedrak & Gohoungodji Paulin & Juste Rajaonson, 2023. "“A fine wine, better with age”: Circular economy historical roots and influential publications: A bibliometric analysis using Reference Publication Year Spectroscopy (RPYS)," Journal of Industrial Ecology, Yale University, vol. 27(6), pages 1593-1612, December.
    5. Zeynep Ozsut Bogar & Askiner Gungor, 2023. "Forecasting Waste Mobile Phone (WMP) Quantity and Evaluating the Potential Contribution to the Circular Economy: A Case Study of Turkey," Sustainability, MDPI, vol. 15(4), pages 1-38, February.
    6. Erik G. Hansen & Ferdinand Revellio, 2020. "Circular value creation architectures: Make, ally, buy, or laissez‐faire," Journal of Industrial Ecology, Yale University, vol. 24(6), pages 1250-1273, December.
    7. Guzzo, D. & Walrave, B. & Videira, N. & Oliveira, I.C. & Pigosso, D.C.A., 2024. "Towards a systemic view on rebound effects: Modelling the feedback loops of rebound mechanisms," Ecological Economics, Elsevier, vol. 217(C).
    8. Donato Masi & Steven Day & Janet Godsell, 2017. "Supply Chain Configurations in the Circular Economy: A Systematic Literature Review," Sustainability, MDPI, vol. 9(9), pages 1-22, September.
    9. Tomasz Rokicki & Aleksandra Perkowska & Bogdan Klepacki & Hubert Szczepaniuk & Edyta Karolina Szczepaniuk & Stanisław Bereziński & Paulina Ziółkowska, 2020. "The Importance of Higher Education in the EU Countries in Achieving the Objectives of the Circular Economy in the Energy Sector," Energies, MDPI, vol. 13(17), pages 1-17, August.
    10. Balint Horvath & Miriam Bahna & Csaba Fogarassy, 2019. "The Ecological Criteria of Circular Growth and the Rebound Risk of Closed Loops," Sustainability, MDPI, vol. 11(10), pages 1-15, May.
    11. Mohammadreza Zolfagharian & Bob Walrave & A. Georges L. Romme & Rob Raven, 2020. "Toward the Dynamic Modeling of Transition Problems: The Case of Electric Mobility," Sustainability, MDPI, vol. 13(1), pages 1-23, December.
    12. Emilio Abad-Segura & Ana Batlles de la Fuente & Mariana-Daniela González-Zamar & Luis Jesús Belmonte-Ureña, 2020. "Effects of Circular Economy Policies on the Environment and Sustainable Growth: Worldwide Research," Sustainability, MDPI, vol. 12(14), pages 1-27, July.
    13. Tsiliyannis, Christos Aristeides, 2018. "Markov chain modeling and forecasting of product returns in remanufacturing based on stock mean-age," European Journal of Operational Research, Elsevier, vol. 271(2), pages 474-489.
    14. Parajuly, Keshav & Habib, Komal & Liu, Gang, 2017. "Waste electrical and electronic equipment (WEEE) in Denmark: Flows, quantities and management," Resources, Conservation & Recycling, Elsevier, vol. 123(C), pages 85-92.
    15. Omar Alhawari & Usama Awan & M. Khurrum S. Bhutta & M. Ali Ülkü, 2021. "Insights from Circular Economy Literature: A Review of Extant Definitions and Unravelling Paths to Future Research," Sustainability, MDPI, vol. 13(2), pages 1-22, January.
    16. Marta Royo & Vicente Chulvi & Elena Mulet & Laura Ruiz‐Pastor, 2023. "Analysis of parameters about useful life extension in 70 tools and methods related to eco‐design and circular economy," Journal of Industrial Ecology, Yale University, vol. 27(2), pages 562-586, April.
    17. Jan Konietzko & Nancy Bocken & Erik Jan Hultink, 2020. "A Tool to Analyze, Ideate and Develop Circular Innovation Ecosystems," Sustainability, MDPI, vol. 12(1), pages 1-39, January.
    18. Faustino Alarcón & Pascual Cortés-Pellicer & David Pérez-Perales & Raquel Sanchis, 2020. "Sustainability vs. Circular Economy from a Disposition Decision Perspective: A Proposal of a Methodology and an Applied Example in SMEs," Sustainability, MDPI, vol. 12(23), pages 1-26, December.
    19. German Arana‐Landin & Waleska Sigüenza & Beñat Landeta‐Manzano & Iker Laskurain‐Iturbe, 2024. "Circular economy: On the road to ISO 59000 family of standards," Corporate Social Responsibility and Environmental Management, John Wiley & Sons, vol. 31(3), pages 1977-2009, May.
    20. Monia Niero & Charlotte L. Jensen & Chiara Farné Fratini & Jens Dorland & Michael S. Jørgensen & Susse Georg, 2021. "Is life cycle assessment enough to address unintended side effects from Circular Economy initiatives?," Journal of Industrial Ecology, Yale University, vol. 25(5), pages 1111-1120, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:tefoso:v:163:y:2021:i:c:s0040162520312403. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.sciencedirect.com/science/journal/00401625 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.