IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v76y2017icp90-104.html
   My bibliography  Save this article

Mechanised harvesting of short-rotation coppices

Author

Listed:
  • Vanbeveren, Stefan P.P.
  • Spinelli, Raffaele
  • Eisenbies, Mark
  • Schweier, Janine
  • Mola-Yudego, Blas
  • Magagnotti, Natascia
  • Acuna, Mauricio
  • Dimitriou, Ioannis
  • Ceulemans, Reinhart

Abstract

Short-rotation coppice (SRC) is an important source of woody biomass for bioenergy. Despite the research carried out on several aspects of SRC production, many uncertainties create barriers to farmers establishing SRC plantations. One of the key economic sources of uncertainty is harvesting methods and costs; more specifically, the performance of contemporary machine methods is reviewed. We collected data from 25 literature references, describing 166 field trials. Three harvesting systems predominate: 127 used single pass cut-and-chip harvesters, 16 used double pass cut-and-store harvesters, 22 used the cut-and-bale harvester, and one study used a cut-and-billet harvester. Mean effective material capacity (EMC) was 30Mg fresh weight h-1 (cut-and-chip technique), 19Mg fresh weight h-1 (cut-and-store technique) and 14Mg fresh weight h-1 (cut-and-bale technique). However, this comparison does not consider engine power, which varies with harvesting technique; cut-and-chip harvesters are by far the most powerful (>200kW). When limiting harvesters to a maximum engine power of 200kW, cut-and-chip harvesters achieved the lowest EMC (5Mg fresh weight h-1), but they also perform a higher degree of material processing (cutting and chipping) than cut-and-store harvesters (only cutting) or than the cut-and-bale harvester (cutting and baling). The trend in commercial machinery is towards increased engine power for cut-and-chip and cut-and-store harvesters. No trends in EMC were documented for the recently developed cut-and-bale harvesting technique, which is presently produced in one version only. Field stocking (5–157Mg fresh weight ha-1 in the reviewed studies) has a significant effect on harvester EMC. Lower field stocking can constrain the maximum EMC achieved by the machine given that harvesting speed can only be increased to a point. While the reviewed studies did not contain sufficient harvesting cost data for a thorough analysis, harvesting costs ranged between 6 and 99 € Mg-1 fresh weight.

Suggested Citation

  • Vanbeveren, Stefan P.P. & Spinelli, Raffaele & Eisenbies, Mark & Schweier, Janine & Mola-Yudego, Blas & Magagnotti, Natascia & Acuna, Mauricio & Dimitriou, Ioannis & Ceulemans, Reinhart, 2017. "Mechanised harvesting of short-rotation coppices," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 90-104.
  • Handle: RePEc:eee:rensus:v:76:y:2017:i:c:p:90-104
    DOI: 10.1016/j.rser.2017.02.059
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032117302782
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.rser.2017.02.059?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Njakou Djomo, S. & Ac, A. & Zenone, T. & De Groote, T. & Bergante, S. & Facciotto, G. & Sixto, H. & Ciria Ciria, P. & Weger, J. & Ceulemans, R., 2015. "Energy performances of intensive and extensive short rotation cropping systems for woody biomass production in the EU," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 845-854.
    2. de Wit, Marc & Junginger, Martin & Faaij, André, 2013. "Learning in dedicated wood production systems: Past trends, future outlook and implications for bioenergy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 417-432.
    3. Testa, Riccardo & Di Trapani, Anna Maria & Foderà, Mario & Sgroi, Filippo & Tudisca, Salvatore, 2014. "Economic evaluation of introduction of poplar as biomass crop in Italy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 38(C), pages 775-780.
    4. Sajdak, M. & Velázquez-Martí, B. & López-Cortés, I. & Fernández-Sarría, A. & Estornell, J., 2014. "Prediction models for estimating pruned biomass obtained from Platanus hispanica Münchh. used for material surveys in urban forests," Renewable Energy, Elsevier, vol. 66(C), pages 178-184.
    5. Sgroi, Filippo & Di Trapani, Anna Maria & Foderà, Mario & Testa, Riccardo & Tudisca, Salvatore, 2015. "Economic assessment of Eucalyptus (spp.) for biomass production as alternative crop in Southern Italy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 44(C), pages 614-619.
    6. Manzone, Marco, 2015. "Energy consumption and CO2 analysis of different types of chippers used in wood biomass plantations," Applied Energy, Elsevier, vol. 156(C), pages 686-692.
    7. Hauk, Sebastian & Knoke, Thomas & Wittkopf, Stefan, 2014. "Economic evaluation of short rotation coppice systems for energy from biomass—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 29(C), pages 435-448.
    8. Njakou Djomo, S. & El Kasmioui, O. & De Groote, T. & Broeckx, L.S. & Verlinden, M.S. & Berhongaray, G. & Fichot, R. & Zona, D. & Dillen, S.Y. & King, J.S. & Janssens, I.A. & Ceulemans, R., 2013. "Energy and climate benefits of bioelectricity from low-input short rotation woody crops on agricultural land over a two-year rotation," Applied Energy, Elsevier, vol. 111(C), pages 862-870.
    9. Velázquez-Martí, B. & Sajdak, M. & López-Cortés, I. & Callejón-Ferre, A.J., 2014. "Wood characterization for energy application proceeding from pruning Morus alba L., Platanus hispanica Münchh. and Sophora japonica L. in urban areas," Renewable Energy, Elsevier, vol. 62(C), pages 478-483.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Vanbeveren, Stefan P.P. & Ceulemans, Reinhart, 2019. "Biodiversity in short-rotation coppice," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 34-43.
    2. Stolarski, Mariusz Jerzy & Warmiński, Kazimierz & Krzyżaniak, Michał & Olba–Zięty, Ewelina & Akincza, Marta, 2020. "Bioenergy technologies and biomass potential vary in Northern European countries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    3. Mariusz Jerzy Stolarski & Stefan Szczukowski & Michał Krzyżaniak & Józef Tworkowski, 2020. "Energy Value of Yield and Biomass Quality in a 7-Year Rotation of Willow Cultivated on Marginal Soil," Energies, MDPI, vol. 13(9), pages 1-12, April.
    4. Fuertes, A. & Oliveira, N. & Cañellas, I. & Sixto, H. & Rodríguez-Soalleiro, R., 2021. "An economic overview of Populus spp. in Short Rotation Coppice systems under Mediterranean conditions: An assessment tool for decision-making," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).
    5. Farzam Tavankar & Mehrdad Nikooy & Francesco Latterini & Rachele Venanzi & Leonardo Bianchini & Rodolfo Picchio, 2021. "The Effects of Soil Moisture on Harvesting Operations in Populus spp. Plantations: Specific Focus on Costs, Energy Balance and GHG Emissions," Sustainability, MDPI, vol. 13(9), pages 1-21, April.
    6. Ewelina Olba-Zięty & Mariusz Jerzy Stolarski & Michał Krzyżaniak, 2021. "Economic Evaluation of the Production of Perennial Crops for Energy Purposes—A Review," Energies, MDPI, vol. 14(21), pages 1-16, November.
    7. Ralf Pecenka & Hannes Lenz & Simeon Olatayo Jekayinfa & Thomas Hoffmann, 2020. "Influence of Tree Species, Harvesting Method and Storage on Energy Demand and Wood Chip Quality When Chipping Poplar, Willow and Black Locust," Agriculture, MDPI, vol. 10(4), pages 1-15, April.
    8. Mariusz Jerzy Stolarski & Kazimierz Warmiński & Michał Krzyżaniak, 2020. "Energy Value of Yield and Biomass Quality of Poplar Grown in Two Consecutive 4-Year Harvest Rotations in the North-East of Poland," Energies, MDPI, vol. 13(6), pages 1-13, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Testa, Riccardo & Foderà, Mario & Di Trapani, Anna Maria & Tudisca, Salvatore & Sgroi, Filippo, 2016. "Giant reed as energy crop for Southern Italy: An economic feasibility study," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 558-564.
    2. Krystyna Kurowska & Renata Marks-Bielska & Stanisław Bielski & Audrius Aleknavičius & Cezary Kowalczyk, 2020. "Geographic Information Systems and the Sustainable Development of Rural Areas," Land, MDPI, vol. 10(1), pages 1-18, December.
    3. Alba Mondragón-Valero & Borja Velázquez-Martí & Domingo M. Salazar & Isabel López-Cortés, 2018. "Influence of Fertilization and Rootstocks in the Biomass Energy Characterization of Prunus dulcis (Miller)," Energies, MDPI, vol. 11(5), pages 1-12, May.
    4. Velázquez-Martí, B. & Gaibor-Cházvez, J. & Niño-Ruiz, Z. & Narbona-Sahuquillo, S., 2018. "Complete characterization of pruning waste from the lechero tree (Euphorbia laurifolia L.) as raw material for biofuel," Renewable Energy, Elsevier, vol. 129(PA), pages 629-637.
    5. Rugani, Benedetto & Golkowska, Katarzyna & Vázquez-Rowe, Ian & Koster, Daniel & Benetto, Enrico & Verdonckt, Pieter, 2015. "Simulation of environmental impact scores within the life cycle of mixed wood chips from alternative short rotation coppice systems in Flanders (Belgium)," Applied Energy, Elsevier, vol. 156(C), pages 449-464.
    6. Stefano Verani & Giulio Sperandio & Rodolfo Picchio & Enrico Marchi & Corrado Costa, 2015. "Sustainability Assessment of a Self-Consumption Wood-Energy Chain on Small Scale for Heat Generation in Central Italy," Energies, MDPI, vol. 8(6), pages 1-16, June.
    7. Fuertes, A. & Oliveira, N. & Cañellas, I. & Sixto, H. & Rodríguez-Soalleiro, R., 2021. "An economic overview of Populus spp. in Short Rotation Coppice systems under Mediterranean conditions: An assessment tool for decision-making," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).
    8. Róger Moya & Carolina Tenorio & Gloria Oporto, 2019. "Short Rotation Wood Crops in Latin American: A Review on Status and Potential Uses as Biofuel," Energies, MDPI, vol. 12(4), pages 1-20, February.
    9. Sgroi, Filippo & Foderà, Mario & Trapani, Anna Maria Di & Tudisca, Salvatore & Testa, Riccardo, 2015. "Economic evaluation of biogas plant size utilizing giant reed," Renewable and Sustainable Energy Reviews, Elsevier, vol. 49(C), pages 403-409.
    10. Marzena Niemczyk & Margalita Bachilava & Marek Wróbel & Marcin Jewiarz & Giorgi Kavtaradze & Nani Goginashvili, 2021. "Productivity and Biomass Properties of Poplar Clones Managed in Short-Rotation Culture as a Potential Fuelwood Source in Georgia," Energies, MDPI, vol. 14(11), pages 1-18, May.
    11. Sgroi, Filippo & Di Trapani, Anna Maria & Foderà, Mario & Testa, Riccardo & Tudisca, Salvatore, 2015. "Economic assessment of Eucalyptus (spp.) for biomass production as alternative crop in Southern Italy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 44(C), pages 614-619.
    12. Schwerz, Felipe & Neto, Durval Dourado & Caron, Braulio Otomar & Nardini, Claiton & Sgarbossa, Jaqueline & Eloy, Elder & Behling, Alexandre & Elli, Elvis Felipe & Reichardt, Klaus, 2020. "Biomass and potential energy yield of perennial woody energy crops under reduced planting spacing," Renewable Energy, Elsevier, vol. 153(C), pages 1238-1250.
    13. Gibon, Thomas & Arvesen, Anders & Hertwich, Edgar G., 2017. "Life cycle assessment demonstrates environmental co-benefits and trade-offs of low-carbon electricity supply options," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 1283-1290.
    14. Ferla, G. & Caputo, P. & Colaninno, N. & Morello, E., 2020. "Urban greenery management and energy planning: A GIS-based potential evaluation of pruning by-products for energy application for the city of Milan," Renewable Energy, Elsevier, vol. 160(C), pages 185-195.
    15. Lanfranchi, Maurizio & Giannetto, Carlo & De Pascale, Angelina, 2016. "Economic analysis and energy valorization of by-products of the olive oil process: “Valdemone DOP” extra virgin olive oil," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 1227-1236.
    16. Nadia Palmieri & Alessandro Suardi & Luigi Pari, 2020. "Italian Consumers’ Willingness to Pay for Eucalyptus Firewood," Sustainability, MDPI, vol. 12(7), pages 1-14, March.
    17. Łukasz Warguła & Mateusz Kukla & Piotr Lijewski & Michał Dobrzyński & Filip Markiewicz, 2020. "Influence of Innovative Woodchipper Speed Control Systems on Exhaust Gas Emissions and Fuel Consumption in Urban Areas," Energies, MDPI, vol. 13(13), pages 1-22, June.
    18. Suopajärvi, Hannu & Pongrácz, Eva & Fabritius, Timo, 2013. "The potential of using biomass-based reducing agents in the blast furnace: A review of thermochemical conversion technologies and assessments related to sustainability," Renewable and Sustainable Energy Reviews, Elsevier, vol. 25(C), pages 511-528.
    19. Salvatore Digiesi & Giovanni Mummolo & Micaela Vitti, 2022. "Minimum Emissions Configuration of a Green Energy–Steel System: An Analytical Model," Energies, MDPI, vol. 15(9), pages 1-21, May.
    20. Jéssica Bárbara da Silva & Edvaldo Pereira Santos Júnior & João Gabriel Távora Pedrosa & Aldo Torres Sales & Everardo Valadares de Sa Barretto Sampaio & Rômulo Simões Cezar Menezes & Emmanuel Damilano, 2022. "Energetic and Economic Analysis of Spineless Cactus Biomass Production in the Brazilian Semi-arid Region," Energies, MDPI, vol. 15(14), pages 1-16, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:76:y:2017:i:c:p:90-104. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.