IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v93y2016icp404-411.html
   My bibliography  Save this article

Preparation of a stable nanocomposite phase change material (NCPCM) using sodium stearoyl lactylate (SSL) as the surfactant and evaluation of its stability using image analysis

Author

Listed:
  • Nourani, Moloud
  • Hamdami, Nasser
  • Keramat, Javad
  • Moheb, Ahmad
  • Shahedi, Mohammad

Abstract

In this study, a new method was proposed for the preparation of a stable Al2O3-paraffin nanocomposite phase change material (NCPCM). Sodium stearoyl lactylate (SSL) was used as the surfactant to improve the dispersion of Al2O3 nanoparticles (2.5, 5, 7.5, and 10 wt.%) in paraffin with a SSL/Al2O3 mass ratio of 1:3.5. After preparation, one group of the samples was placed in an incubator at a temperature of 60 °C for one week to evaluate its stability during the time elapsed. The other was left alternately in two incubators, one at 60 °C and the other at 25 °C over time intervals of 1 h in order to evaluate the stability of the sample after given numbers of melting/freezing cycles. This latter treatment has been seldom ever reported elsewhere. For NCPCM stability evaluation, the samples were broken into two parts equal in volume and the change ratios of surface layer Al3+ concentration are determined. Also, image analysis is used for evaluating the stability of nanofluids. The results obtained from the two methods are found to be in good agreement. Image analysis is, therefore, proposed as a nondestructive method with good accuracy, especially for evaluating the stability of high concentration nanofluids.

Suggested Citation

  • Nourani, Moloud & Hamdami, Nasser & Keramat, Javad & Moheb, Ahmad & Shahedi, Mohammad, 2016. "Preparation of a stable nanocomposite phase change material (NCPCM) using sodium stearoyl lactylate (SSL) as the surfactant and evaluation of its stability using image analysis," Renewable Energy, Elsevier, vol. 93(C), pages 404-411.
    • Handle: RePEc:eee:renene:v:93:y:2016:i:c:p:404-411
    DOI: 10.1016/j.renene.2016.02.073
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148116301744
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2016.02.073?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Jiang, Xiang & Luo, Ruilian & Peng, Feifei & Fang, Yutang & Akiyama, Tomohiro & Wang, Shuangfeng, 2015. "Synthesis, characterization and thermal properties of paraffin microcapsules modified with nano-Al2O3," Applied Energy, Elsevier, vol. 137(C), pages 731-737.
    2. Li, Min, 2013. "A nano-graphite/paraffin phase change material with high thermal conductivity," Applied Energy, Elsevier, vol. 106(C), pages 25-30.
    3. Warzoha, Ronald J. & Weigand, Rebecca M. & Fleischer, Amy S., 2015. "Temperature-dependent thermal properties of a paraffin phase change material embedded with herringbone style graphite nanofibers," Applied Energy, Elsevier, vol. 137(C), pages 716-725.
    4. Lin, Cherng-Yuan & Wang, Jung-Chang & Chen, Teng-Chieh, 2011. "Analysis of suspension and heat transfer characteristics of Al2O3 nanofluids prepared through ultrasonic vibration," Applied Energy, Elsevier, vol. 88(12), pages 4527-4533.
    5. Sarı, Ahmet & Alkan, Cemil & Bilgin, Cahit, 2014. "Micro/nano encapsulation of some paraffin eutectic mixtures with poly(methyl methacrylate) shell: Preparation, characterization and latent heat thermal energy storage properties," Applied Energy, Elsevier, vol. 136(C), pages 217-227.
    6. Tahan Latibari, Sara & Mehrali, Mohammad & Mehrali, Mehdi & Indra Mahlia, Teuku Meurah & Cornelis Metselaar, Hendrik Simon, 2013. "Synthesis, characterization and thermal properties of nanoencapsulated phase change materials via sol–gel method," Energy, Elsevier, vol. 61(C), pages 664-672.
    7. Nourani, Moloud & Hamdami, Nasser & Keramat, Javad & Moheb, Ahmad & Shahedi, Mohammad, 2016. "Thermal behavior of paraffin-nano-Al2O3 stabilized by sodium stearoyl lactylate as a stable phase change material with high thermal conductivity," Renewable Energy, Elsevier, vol. 88(C), pages 474-482.
    8. Fan, Li-Wu & Fang, Xin & Wang, Xiao & Zeng, Yi & Xiao, Yu-Qi & Yu, Zi-Tao & Xu, Xu & Hu, Ya-Cai & Cen, Ke-Fa, 2013. "Effects of various carbon nanofillers on the thermal conductivity and energy storage properties of paraffin-based nanocomposite phase change materials," Applied Energy, Elsevier, vol. 110(C), pages 163-172.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Jin & Li, Yanxin & Zheng, Dan & Mikulčić, Hrvoje & Vujanović, Milan & Sundén, Bengt, 2021. "Preparation and thermophysical property analysis of nanocomposite phase change materials for energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).
    2. Bellos, Evangelos & Tzivanidis, Christos, 2017. "Parametric analysis and optimization of an Organic Rankine Cycle with nanofluid based solar parabolic trough collectors," Renewable Energy, Elsevier, vol. 114(PB), pages 1376-1393.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mohammad Reza Safaei & Hamid Reza Goshayeshi & Issa Chaer, 2019. "Solar Still Efficiency Enhancement by Using Graphene Oxide/Paraffin Nano-PCM," Energies, MDPI, vol. 12(10), pages 1-13, May.
    2. Mandal, Swaroop Kumar & Kumar, Samarjeet & Singh, Purushottam Kumar & Mishra, Santosh Kumar & Singh, D.K., 2020. "Performance investigation of nanocomposite based solar water heater," Energy, Elsevier, vol. 198(C).
    3. Nourani, Moloud & Hamdami, Nasser & Keramat, Javad & Moheb, Ahmad & Shahedi, Mohammad, 2016. "Thermal behavior of paraffin-nano-Al2O3 stabilized by sodium stearoyl lactylate as a stable phase change material with high thermal conductivity," Renewable Energy, Elsevier, vol. 88(C), pages 474-482.
    4. Ahmed Hassan & Mohammad Shakeel Laghari & Yasir Rashid, 2016. "Micro-Encapsulated Phase Change Materials: A Review of Encapsulation, Safety and Thermal Characteristics," Sustainability, MDPI, vol. 8(10), pages 1-32, October.
    5. Nomura, Takahiro & Tabuchi, Kazuki & Zhu, Chunyu & Sheng, Nan & Wang, Shuangfeng & Akiyama, Tomohiro, 2015. "High thermal conductivity phase change composite with percolating carbon fiber network," Applied Energy, Elsevier, vol. 154(C), pages 678-685.
    6. Wang, Tingyu & Jiang, Yan & Huang, Jin & Wang, Shuangfeng, 2018. "High thermal conductive paraffin/calcium carbonate phase change microcapsules based composites with different carbon network," Applied Energy, Elsevier, vol. 218(C), pages 184-191.
    7. Li, Zongtao & Wu, Yuxuan & Zhuang, Baoshan & Zhao, Xuezhi & Tang, Yong & Ding, Xinrui & Chen, Kaihang, 2017. "Preparation of novel copper-powder-sintered frame/paraffin form-stable phase change materials with extremely high thermal conductivity," Applied Energy, Elsevier, vol. 206(C), pages 1147-1157.
    8. Ma, Zhenjun & Lin, Wenye & Sohel, M. Imroz, 2016. "Nano-enhanced phase change materials for improved building performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 1256-1268.
    9. Wang, Tingyu & Wang, Shuangfeng & Luo, Ruilian & Zhu, Chunyu & Akiyama, Tomohiro & Zhang, Zhengguo, 2016. "Microencapsulation of phase change materials with binary cores and calcium carbonate shell for thermal energy storage," Applied Energy, Elsevier, vol. 171(C), pages 113-119.
    10. Mehrali, Mohammad & Tahan Latibari, Sara & Mehrali, Mehdi & Mahlia, Teuku Meurah Indra & Sadeghinezhad, Emad & Metselaar, Hendrik Simon Cornelis, 2014. "Preparation of nitrogen-doped graphene/palmitic acid shape stabilized composite phase change material with remarkable thermal properties for thermal energy storage," Applied Energy, Elsevier, vol. 135(C), pages 339-349.
    11. Lin, Yaxue & Jia, Yuting & Alva, Guruprasad & Fang, Guiyin, 2018. "Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2730-2742.
    12. Amaral, C. & Vicente, R. & Marques, P.A.A.P. & Barros-Timmons, A., 2017. "Phase change materials and carbon nanostructures for thermal energy storage: A literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 1212-1228.
    13. Suganthi, K.S. & Leela Vinodhan, V. & Rajan, K.S., 2014. "Heat transfer performance and transport properties of ZnO–ethylene glycol and ZnO–ethylene glycol–water nanofluid coolants," Applied Energy, Elsevier, vol. 135(C), pages 548-559.
    14. Qiu, Lin & Ouyang, Yuxin & Feng, Yanhui & Zhang, Xinxin, 2019. "Review on micro/nano phase change materials for solar thermal applications," Renewable Energy, Elsevier, vol. 140(C), pages 513-538.
    15. Manoj Kumar Pasupathi & Karthick Alagar & Michael Joseph Stalin P & Matheswaran M.M & Ghosh Aritra, 2020. "Characterization of Hybrid-nano/Paraffin Organic Phase Change Material for Thermal Energy Storage Applications in Solar Thermal Systems," Energies, MDPI, vol. 13(19), pages 1-15, September.
    16. Alva, Guruprasad & Lin, Yaxue & Fang, Guiyin, 2018. "An overview of thermal energy storage systems," Energy, Elsevier, vol. 144(C), pages 341-378.
    17. Yuan, Yanping & Zhang, Nan & Li, Tianyu & Cao, Xiaoling & Long, Weiyue, 2016. "Thermal performance enhancement of palmitic-stearic acid by adding graphene nanoplatelets and expanded graphite for thermal energy storage: A comparative study," Energy, Elsevier, vol. 97(C), pages 488-497.
    18. Zhu, Yejun & Huang, Baoling & Wu, Jingshen, 2014. "Optimization of filler distribution for organic phase change material composites: Numerical investigation and entropy analysis," Applied Energy, Elsevier, vol. 132(C), pages 543-550.
    19. Fan, Li-Wu & Yao, Xiao-Li & Wang, Xiao & Wu, Yu-Yue & Liu, Xue-Ling & Xu, Xu & Yu, Zi-Tao, 2015. "Non-isothermal crystallization of aqueous nanofluids with high aspect-ratio carbon nano-additives for cold thermal energy storage," Applied Energy, Elsevier, vol. 138(C), pages 193-201.
    20. Cui, Hongzhi & Tang, Waiching & Qin, Qinghua & Xing, Feng & Liao, Wenyu & Wen, Haibo, 2017. "Development of structural-functional integrated energy storage concrete with innovative macro-encapsulated PCM by hollow steel ball," Applied Energy, Elsevier, vol. 185(P1), pages 107-118.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:93:y:2016:i:c:p:404-411. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.