IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v74y2015icp825-838.html
   My bibliography  Save this article

Analytical solution of heat transfer in a shell-and-tube latent thermal energy storage system

Author

Listed:
  • Bechiri, Mohammed
  • Mansouri, Kacem

Abstract

An analytical solution of a latent heat storage unit (LHSU) consisting of a shell-and tube was obtained by using the Exponential Integral Function and the variables separation technique. The working fluid (water) circulating by forced convection inside the inner tube charges and discharges the storage unit. The comparison between analytical predictions and experimental data shows good agreement. Extensive parametric studies were conducted in order to examine the effect of the pertinent parameters (such as natural convection, mass flow rate of HTF, outer tube radius, pipe length etc.) on the melting and solidification processes of paraffin as a PCM. In order to provide guidelines for system performance and design optimisation, unsteady temperature distributions within PCM during melting/solidification, energy stored, position of moving interface and thermal efficiency have been obtained by a series of numerical calculations and represented graphically.

Suggested Citation

  • Bechiri, Mohammed & Mansouri, Kacem, 2015. "Analytical solution of heat transfer in a shell-and-tube latent thermal energy storage system," Renewable Energy, Elsevier, vol. 74(C), pages 825-838.
    • Handle: RePEc:eee:renene:v:74:y:2015:i:c:p:825-838
    DOI: 10.1016/j.renene.2014.09.010
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148114005606
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2014.09.010?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tao, Y.B. & He, Y.L., 2011. "Numerical study on thermal energy storage performance of phase change material under non-steady-state inlet boundary," Applied Energy, Elsevier, vol. 88(11), pages 4172-4179.
    2. Sharma, Atul & Won, Lee Dong & Buddhi, D & Park, Jun Un, 2005. "Numerical heat transfer studies of the fatty acids for different heat exchanger materials on the performance of a latent heat storage system," Renewable Energy, Elsevier, vol. 30(14), pages 2179-2187.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. He, Ya-Ling & Qiu, Yu & Wang, Kun & Yuan, Fan & Wang, Wen-Qi & Li, Ming-Jia & Guo, Jia-Qi, 2020. "Perspective of concentrating solar power," Energy, Elsevier, vol. 198(C).
    2. Raud, Ralf & Cholette, Michael E. & Riahi, Soheila & Bruno, Frank & Saman, Wasim & Will, Geoffrey & Steinberg, Theodore A., 2017. "Design optimization method for tube and fin latent heat thermal energy storage systems," Energy, Elsevier, vol. 134(C), pages 585-594.
    3. Xun Yang & Teng Xiong & Jing Liang Dong & Wen Xin Li & Yong Wang, 2017. "Investigation of the Dynamic Melting Process in a Thermal Energy Storage Unit Using a Helical Coil Heat Exchanger," Energies, MDPI, vol. 10(8), pages 1-18, August.
    4. Gasia, Jaume & Diriken, Jan & Bourke, Malcolm & Van Bael, Johan & Cabeza, Luisa F., 2017. "Comparative study of the thermal performance of four different shell-and-tube heat exchangers used as latent heat thermal energy storage systems," Renewable Energy, Elsevier, vol. 114(PB), pages 934-944.
    5. Saulius Pakalka & Kęstutis Valančius & Giedrė Streckienė, 2021. "Experimental and Theoretical Investigation of the Natural Convection Heat Transfer Coefficient in Phase Change Material (PCM) Based Fin-and-Tube Heat Exchanger," Energies, MDPI, vol. 14(3), pages 1-14, January.
    6. Khalid, Muhammad Zeeshan & Zubair, Muhammad & Ali, Majid, 2019. "An analytical method for the solution of two phase Stefan problem in cylindrical geometry," Applied Mathematics and Computation, Elsevier, vol. 342(C), pages 295-308.
    7. Reyes, A. & Henríquez-Vargas, L. & Rivera, J. & Sepúlveda, F., 2017. "Theoretical and experimental study of aluminum foils and paraffin wax mixtures as thermal energy storage material," Renewable Energy, Elsevier, vol. 101(C), pages 225-235.
    8. Tao, Y.B. & He, Y.L., 2015. "Effects of natural convection on latent heat storage performance of salt in a horizontal concentric tube," Applied Energy, Elsevier, vol. 143(C), pages 38-46.
    9. Mostafavi Tehrani, S. Saeed & Shoraka, Yashar & Diarce, Gonzalo & Taylor, Robert A., 2019. "An improved, generalized effective thermal conductivity method for rapid design of high temperature shell-and-tube latent heat thermal energy storage systems," Renewable Energy, Elsevier, vol. 132(C), pages 694-708.
    10. Piraino, Francesco & Blekhman, David & Dray, Michael & Fragiacomo, Petronilla, 2021. "Empirically verified analysis of dual pre-cooling system for hydrogen refuelling station," Renewable Energy, Elsevier, vol. 163(C), pages 1612-1625.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tao, Y.B. & Lin, C.H. & He, Y.L., 2015. "Effect of surface active agent on thermal properties of carbonate salt/carbon nanomaterial composite phase change material," Applied Energy, Elsevier, vol. 156(C), pages 478-489.
    2. Tao, Y.B. & Carey, V.P., 2016. "Effects of PCM thermophysical properties on thermal storage performance of a shell-and-tube latent heat storage unit," Applied Energy, Elsevier, vol. 179(C), pages 203-210.
    3. Zhao, Dongliang & Tan, Gang, 2015. "Numerical analysis of a shell-and-tube latent heat storage unit with fins for air-conditioning application," Applied Energy, Elsevier, vol. 138(C), pages 381-392.
    4. Liu, Jiatao & Lu, Shilei, 2024. "Thermal performance of packed-bed latent heat storage tank integrated with flat-plate collectors under intermittent loads of building heating," Energy, Elsevier, vol. 299(C).
    5. Tehrani, S. Saeed Mostafavi & Taylor, Robert A. & Saberi, Pouya & Diarce, Gonzalo, 2016. "Design and feasibility of high temperature shell and tube latent heat thermal energy storage system for solar thermal power plants," Renewable Energy, Elsevier, vol. 96(PA), pages 120-136.
    6. Khalil Anwar, M. & Yilbas, B.S. & Shuja, S.Z., 2016. "A thermal battery mimicking a concentrated volumetric solar receiver," Applied Energy, Elsevier, vol. 175(C), pages 16-30.
    7. Li, Y.Q. & He, Y.L. & Song, H.J. & Xu, C. & Wang, W.W., 2013. "Numerical analysis and parameters optimization of shell-and-tube heat storage unit using three phase change materials," Renewable Energy, Elsevier, vol. 59(C), pages 92-99.
    8. O’Connor, William E. & Warzoha, Ronald & Weigand, Rebecca & Fleischer, Amy S. & Wemhoff, Aaron P., 2014. "Thermal property prediction and measurement of organic phase change materials in the liquid phase near the melting point," Applied Energy, Elsevier, vol. 132(C), pages 496-506.
    9. Park, Jinsoo & Choi, Sung Ho & Karng, Sarng Woo, 2021. "Cascaded latent thermal energy storage using a charging control method," Energy, Elsevier, vol. 215(PA).
    10. Murray, Robynne E. & Groulx, Dominic, 2014. "Experimental study of the phase change and energy characteristics inside a cylindrical latent heat energy storage system: Part 2 simultaneous charging and discharging," Renewable Energy, Elsevier, vol. 63(C), pages 724-734.
    11. Chen, Xue & Li, Xiaolei & Xia, Xinlin & Sun, Chuang & Liu, Rongqiang, 2021. "Thermal storage analysis of a foam-filled PCM heat exchanger subjected to fluctuating flow conditions," Energy, Elsevier, vol. 216(C).
    12. Mostafavi Tehrani, S. Saeed & Shoraka, Yashar & Diarce, Gonzalo & Taylor, Robert A., 2019. "An improved, generalized effective thermal conductivity method for rapid design of high temperature shell-and-tube latent heat thermal energy storage systems," Renewable Energy, Elsevier, vol. 132(C), pages 694-708.
    13. Li, Zhi & Yu, Xiaoli & Wang, Lei & Lu, Yiji & Huang, Rui & Chang, Jinwei & Jiang, Ruicheng, 2020. "Effects of fluctuating thermal sources on a shell-and-tube latent thermal energy storage during charging process," Energy, Elsevier, vol. 199(C).
    14. Verma, Prashant & Varun & Singal, S.K., 2008. "Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(4), pages 999-1031, May.
    15. Safari, Vahid & Abolghasemi, Hossein & Kamkari, Babak, 2021. "Experimental and numerical investigations of thermal performance enhancement in a latent heat storage heat exchanger using bifurcated and straight fins," Renewable Energy, Elsevier, vol. 174(C), pages 102-121.
    16. Murray, Robynne E. & Groulx, Dominic, 2014. "Experimental study of the phase change and energy characteristics inside a cylindrical latent heat energy storage system: Part 1 consecutive charging and discharging," Renewable Energy, Elsevier, vol. 62(C), pages 571-581.
    17. Miranda Fuentes, Johann & Johannes, Kévyn & Kuznik, Frédéric & Cosnier, Matthieu & Virgone, Joseph, 2013. "Melting with convection and radiation in a participating phase change material," Applied Energy, Elsevier, vol. 109(C), pages 454-461.
    18. Tay, N.H.S. & Belusko, M. & Liu, M. & Bruno, F., 2015. "Investigation of the effect of dynamic melting in a tube-in-tank PCM system using a CFD model," Applied Energy, Elsevier, vol. 137(C), pages 738-747.
    19. Liu, Yang & Zheng, Ruowei & Li, Ji, 2022. "High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    20. Liu, Y.K. & Tao, Y.B., 2018. "Thermodynamic analysis and optimization of multistage latent heat storage unit under unsteady inlet temperature based on entransy theory," Applied Energy, Elsevier, vol. 227(C), pages 488-496.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:74:y:2015:i:c:p:825-838. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.