IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v69y2014icp134-146.html
   My bibliography  Save this article

Phase change material with graphite foam for applications in high-temperature latent heat storage systems of concentrated solar power plants

Author

Listed:
  • Zhao, Weihuan
  • France, David M.
  • Yu, Wenhua
  • Kim, Taeil
  • Singh, Dileep

Abstract

A high-temperature latent heat thermal energy storage (LHTES) system was analyzed for applications to concentrated solar power (CSP) plants (utilizing steam at ∼610 °C) for large-scale electricity generation. Magnesium chloride was selected as the phase change material (PCM) for the latent heat storage because of its high melting point (714 °C). Because the thermal conductivities of most salt materials are very low, usually less than 1 W/m K, graphite foam was applied as an additive to considerably enhance the overall thermal conductivity of the resulting graphite foam–PCM combination in the LHTES system. The heat transfer performance and the exergy efficiency in the graphite foam–MgCl2 LHTES system were considered for the design and optimization of the storage system. Three-dimensional (3-D) heat transfer simulations were conducted for the storage system using commercial software COMSOL. Three groups of analyses were performed for an LHTES system: using PCM alone without graphite foam, using average material properties for graphite foam–PCM combination, and using anisotropic thermal conductivity and temperature-dependent material properties for graphite foam–PCM. Results presented show that the graphite foam can help to significantly improve the heat transfer performance as well as the exergy efficiency in the LHTES system. They also show the effects of the anisotropic thermal conductivity and indicate capital cost savings for a CSP electric power plant by reducing the number of heat transfer fluid (HTF) pipes in the LHTES tank by a factor of eight.

Suggested Citation

  • Zhao, Weihuan & France, David M. & Yu, Wenhua & Kim, Taeil & Singh, Dileep, 2014. "Phase change material with graphite foam for applications in high-temperature latent heat storage systems of concentrated solar power plants," Renewable Energy, Elsevier, vol. 69(C), pages 134-146.
    • Handle: RePEc:eee:renene:v:69:y:2014:i:c:p:134-146
    DOI: 10.1016/j.renene.2014.03.031
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148114001773
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2014.03.031?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Singh, Narendra & Kaushik, S.C. & Misra, R.D., 2000. "Exergetic analysis of a solar thermal power system," Renewable Energy, Elsevier, vol. 19(1), pages 135-143.
    2. Nithyanandam, K. & Pitchumani, R., 2013. "Computational studies on a latent thermal energy storage system with integral heat pipes for concentrating solar power," Applied Energy, Elsevier, vol. 103(C), pages 400-415.
    3. Medrano, Marc & Gil, Antoni & Martorell, Ingrid & Potau, Xavi & Cabeza, Luisa F., 2010. "State of the art on high-temperature thermal energy storage for power generation. Part 2--Case studies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 56-72, January.
    4. Jegadheeswaran, S. & Pohekar, S.D. & Kousksou, T., 2010. "Exergy based performance evaluation of latent heat thermal storage system: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(9), pages 2580-2595, December.
    5. Li, Ya-Qi & He, Ya-Ling & Wang, Zhi-Feng & Xu, Chao & Wang, Weiwei, 2012. "Exergy analysis of two phase change materials storage system for solar thermal power with finite-time thermodynamics," Renewable Energy, Elsevier, vol. 39(1), pages 447-454.
    6. Gil, Antoni & Medrano, Marc & Martorell, Ingrid & Lázaro, Ana & Dolado, Pablo & Zalba, Belén & Cabeza, Luisa F., 2010. "State of the art on high temperature thermal energy storage for power generation. Part 1--Concepts, materials and modellization," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 31-55, January.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Liu, Ming & Steven Tay, N.H. & Bell, Stuart & Belusko, Martin & Jacob, Rhys & Will, Geoffrey & Saman, Wasim & Bruno, Frank, 2016. "Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1411-1432.
    2. Mostafavi Tehrani, S. Saeed & Shoraka, Yashar & Nithyanandam, Karthik & Taylor, Robert A., 2019. "Shell-and-tube or packed bed thermal energy storage systems integrated with a concentrated solar power: A techno-economic comparison of sensible and latent heat systems," Applied Energy, Elsevier, vol. 238(C), pages 887-910.
    3. Fernandes, D. & Pitié, F. & Cáceres, G. & Baeyens, J., 2012. "Thermal energy storage: “How previous findings determine current research priorities”," Energy, Elsevier, vol. 39(1), pages 246-257.
    4. Rovira, Antonio & Montes, María José & Valdes, Manuel & Martínez-Val, José María, 2011. "Energy management in solar thermal power plants with double thermal storage system and subdivided solar field," Applied Energy, Elsevier, vol. 88(11), pages 4055-4066.
    5. Li, Y.Q. & He, Y.L. & Song, H.J. & Xu, C. & Wang, W.W., 2013. "Numerical analysis and parameters optimization of shell-and-tube heat storage unit using three phase change materials," Renewable Energy, Elsevier, vol. 59(C), pages 92-99.
    6. Anisur, M.R. & Mahfuz, M.H. & Kibria, M.A. & Saidur, R. & Metselaar, I.H.S.C. & Mahlia, T.M.I., 2013. "Curbing global warming with phase change materials for energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 23-30.
    7. ELSihy, ELSaeed Saad & Mokhtar, Omar & Xu, Chao & Du, Xiaoze & Adel, Mohamed, 2023. "Cyclic performance characterization of a high-temperature thermal energy storage system packed with rock/slag pebbles granules combined with encapsulated phase change materials," Applied Energy, Elsevier, vol. 331(C).
    8. El Ghazzani, Badreddine & Martinez Plaza, Diego & Ait El Cadi, Radia & Ihlal, Ahmed & Abnay, Brahim & Bouabid, Khalid, 2017. "Thermal plant based on parabolic trough collectors for industrial process heat generation in Morocco," Renewable Energy, Elsevier, vol. 113(C), pages 1261-1275.
    9. Mohamed, Shamseldin A. & Al-Sulaiman, Fahad A. & Ibrahim, Nasiru I. & Zahir, Md. Hasan & Al-Ahmed, Amir & Saidur, R. & Yılbaş, B.S. & Sahin, A.Z., 2017. "A review on current status and challenges of inorganic phase change materials for thermal energy storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 1072-1089.
    10. Nixon, J.D. & Dey, P.K. & Davies, P.A., 2012. "The feasibility of hybrid solar-biomass power plants in India," Energy, Elsevier, vol. 46(1), pages 541-554.
    11. Gasia, Jaume & de Gracia, Alvaro & Zsembinszki, Gabriel & Cabeza, Luisa F., 2019. "Influence of the storage period between charge and discharge in a latent heat thermal energy storage system working under partial load operating conditions," Applied Energy, Elsevier, vol. 235(C), pages 1389-1399.
    12. Jian, Yongfang & Falcoz, Quentin & Neveu, Pierre & Bai, Fengwu & Wang, Yan & Wang, Zhifeng, 2015. "Design and optimization of solid thermal energy storage modules for solar thermal power plant applications," Applied Energy, Elsevier, vol. 139(C), pages 30-42.
    13. Li, Zhi & Lu, Yiji & Huang, Rui & Chang, Jinwei & Yu, Xiaonan & Jiang, Ruicheng & Yu, Xiaoli & Roskilly, Anthony Paul, 2021. "Applications and technological challenges for heat recovery, storage and utilisation with latent thermal energy storage," Applied Energy, Elsevier, vol. 283(C).
    14. Pintaldi, Sergio & Perfumo, Cristian & Sethuvenkatraman, Subbu & White, Stephen & Rosengarten, Gary, 2015. "A review of thermal energy storage technologies and control approaches for solar cooling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 975-995.
    15. Solé, Aran & Falcoz, Quentin & Cabeza, Luisa F. & Neveu, Pierre, 2018. "Geometry optimization of a heat storage system for concentrated solar power plants (CSP)," Renewable Energy, Elsevier, vol. 123(C), pages 227-235.
    16. Tanaka, Yasuto & Mesfun, Sennai & Umeki, Kentaro & Toffolo, Andrea & Tamaura, Yutaka & Yoshikawa, Kunio, 2015. "Thermodynamic performance of a hybrid power generation system using biomass gasification and concentrated solar thermal processes," Applied Energy, Elsevier, vol. 160(C), pages 664-672.
    17. Gil, Antoni & Barreneche, Camila & Moreno, Pere & Solé, Cristian & Inés Fernández, A. & Cabeza, Luisa F., 2013. "Thermal behaviour of d-mannitol when used as PCM: Comparison of results obtained by DSC and in a thermal energy storage unit at pilot plant scale," Applied Energy, Elsevier, vol. 111(C), pages 1107-1113.
    18. Fukahori, Ryo & Nomura, Takahiro & Zhu, Chunyu & Sheng, Nan & Okinaka, Noriyuki & Akiyama, Tomohiro, 2016. "Macro-encapsulation of metallic phase change material using cylindrical-type ceramic containers for high-temperature thermal energy storage," Applied Energy, Elsevier, vol. 170(C), pages 324-328.
    19. Bruch, A. & Molina, S. & Esence, T. & Fourmigué, J.F. & Couturier, R., 2017. "Experimental investigation of cycling behaviour of pilot-scale thermal oil packed-bed thermal storage system," Renewable Energy, Elsevier, vol. 103(C), pages 277-285.
    20. Usaola, Julio, 2012. "Participation of CSP plants in the reserve markets: A new challenge for regulators," Energy Policy, Elsevier, vol. 49(C), pages 562-571.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:69:y:2014:i:c:p:134-146. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.