IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v217y2023ics0960148123010844.html
   My bibliography  Save this article

Evaluation of the integrated performance for floor heating using micro-encapsulated phase change material slurry

Author

Listed:
  • Qi, Di
  • Xie, Wenbin
  • Zhao, Chuangyao
  • Song, Bingye
  • Li, Angui

Abstract

The micro-encapsulated phase change material (MPCM) slurry has the advantage of high heat transfer performance and heat capacity. Using MPCM slurry in the radiant floor heating (RFH) system could improve the indoor environment, but the overall performance was highly affected by heat transfer and pressure drop. In this paper, the flow and heat transfer model of MPCM slurry was developed and verified. The performance of serpentine and counterflow spiral structures was compared. Afterward, the optimized MPCM slurry material was selected as the heat transfer medium in RFH systems. Meanwhile, the flow and thermal performance of water and MCPM slurry were compared. Finally, the effects of different volume fractions and inlet velocities on integrated performance were investigated. The results indicated that the comprehensive performance of the serpentine system was better than the counterflow spiral. When the volume fraction was 15%, the comprehensive evaluation coefficients of three MPCM slurry heat systems are 17.9%, 22.9% and 13.8% higher than water respectively. MPCMS2 (n-dodecane) was suitable to use as the heat transferring medium in RFH system. Furthermore, as the volume fractions were 10%, 20% and 30%, the optimized velocities were 0.5 m s−1, 0.9 m s−1 and 1.1 m s−1, respectively.

Suggested Citation

  • Qi, Di & Xie, Wenbin & Zhao, Chuangyao & Song, Bingye & Li, Angui, 2023. "Evaluation of the integrated performance for floor heating using micro-encapsulated phase change material slurry," Renewable Energy, Elsevier, vol. 217(C).
    • Handle: RePEc:eee:renene:v:217:y:2023:i:c:s0960148123010844
    DOI: 10.1016/j.renene.2023.119169
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148123010844
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2023.119169?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Castellón, Cecilia & Medrano, Marc & Roca, Joan & Cabeza, Luisa F. & Navarro, Maria E. & Fernández, Ana I. & Lázaro, Ana & Zalba, Belen, 2010. "Effect of microencapsulated phase change material in sandwich panels," Renewable Energy, Elsevier, vol. 35(10), pages 2370-2374.
    2. Xu, Lingling & Pu, Liang & Angelo, Zarrella & Zhang, Derun & Dai, Minghao & Zhang, Shengqi, 2022. "An experimental investigation on performance of microencapsulated phase change material slurry in ground heat exchanger," Renewable Energy, Elsevier, vol. 198(C), pages 296-305.
    3. Ma, F. & Zhang, P. & Shi, X.J., 2018. "Investigation of thermo-fluidic performance of phase change material slurry and energy transport characteristics," Applied Energy, Elsevier, vol. 227(C), pages 643-654.
    4. Di Qi & Chuangyao Zhao & Shixiong Li & Ran Chen & Angui Li, 2021. "Numerical Assessment of Earth to Air Heat Exchanger with Variable Humidity Conditions in Greenhouses," Energies, MDPI, vol. 14(5), pages 1-18, March.
    5. Pu, Liang & Xu, Lingling & Zhang, Shengqi & Li, Yanzhong, 2019. "Optimization of ground heat exchanger using microencapsulated phase change material slurry based on tree-shaped structure," Applied Energy, Elsevier, vol. 240(C), pages 860-869.
    6. Cai, Yibing & Wei, Qufu & Huang, Fenglin & Lin, Shiliang & Chen, Fang & Gao, Weidong, 2009. "Thermal stability, latent heat and flame retardant properties of the thermal energy storage phase change materials based on paraffin/high density polyethylene composites," Renewable Energy, Elsevier, vol. 34(10), pages 2117-2123.
    7. Kayaci, Nurullah, 2020. "Energy and exergy analysis and thermo-economic optimization of the ground source heat pump integrated with radiant wall panel and fan-coil unit with floor heating or radiator," Renewable Energy, Elsevier, vol. 160(C), pages 333-349.
    8. Zhou, Guobing & He, Jing, 2015. "Thermal performance of a radiant floor heating system with different heat storage materials and heating pipes," Applied Energy, Elsevier, vol. 138(C), pages 648-660.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, G.H. & Zhao, C.Y., 2011. "Thermal and rheological properties of microencapsulated phase change materials," Renewable Energy, Elsevier, vol. 36(11), pages 2959-2966.
    2. Giro-Paloma, Jessica & Martínez, Mònica & Cabeza, Luisa F. & Fernández, A. Inés, 2016. "Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1059-1075.
    3. Li, Qi & Qiao, Geng & Mura, Ernesto & Li, Chuan & Fischer, Ludger & Ding, Yulong, 2020. "Experimental and numerical studies of a fatty acid based phase change dispersion for enhancing cooling of high voltage electrical devices," Energy, Elsevier, vol. 198(C).
    4. Ikutegbe, Charles A. & Farid, Mohammed M., 2020. "Application of phase change material foam composites in the built environment: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 131(C).
    5. Angeliki Kitsopoulou & Antonis Zacharis & Nikolaos Ziozas & Evangelos Bellos & Petros Iliadis & Ioannis Lampropoulos & Eleni Chatzigeorgiou & Komninos Angelakoglou & Nikolaos Nikolopoulos, 2023. "Dynamic Energy Analysis of Different Heat Pump Heating Systems Exploiting Renewable Energy Sources," Sustainability, MDPI, vol. 15(14), pages 1-36, July.
    6. Monika Gandhi & Ashok Kumar & Rajasekar Elangovan & Chandan Swaroop Meena & Kishor S. Kulkarni & Anuj Kumar & Garima Bhanot & Nishant R. Kapoor, 2020. "A Review on Shape-Stabilized Phase Change Materials for Latent Energy Storage in Buildings," Sustainability, MDPI, vol. 12(22), pages 1-17, November.
    7. Wang, Xianglei & Guo, Quangui & Wang, Junzhong & Zhong, Yajuan & Wang, Liyong & Wei, Xinghai & Liu, Lang, 2013. "Thermal conductivity enhancement of form-stable phase-change composites by milling of expanded graphite, micro-capsules and polyethylene," Renewable Energy, Elsevier, vol. 60(C), pages 506-509.
    8. Giro-Paloma, Jessica & Barreneche, Camila & Martínez, Mònica & Šumiga, Boštjan & Fernández, Ana Inés & Cabeza, Luisa F., 2016. "Mechanical response evaluation of microcapsules from different slurries," Renewable Energy, Elsevier, vol. 85(C), pages 732-739.
    9. Lizana, Jesús & Chacartegui, Ricardo & Barrios-Padura, Angela & Ortiz, Carlos, 2018. "Advanced low-carbon energy measures based on thermal energy storage in buildings: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3705-3749.
    10. Salunkhe, Pramod B. & Shembekar, Prashant S., 2012. "A review on effect of phase change material encapsulation on the thermal performance of a system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 5603-5616.
    11. O’Connor, William E. & Warzoha, Ronald & Weigand, Rebecca & Fleischer, Amy S. & Wemhoff, Aaron P., 2014. "Thermal property prediction and measurement of organic phase change materials in the liquid phase near the melting point," Applied Energy, Elsevier, vol. 132(C), pages 496-506.
    12. Javadi, Hossein & Urchueguía, Javier F. & Badenes, Borja & Mateo, Miguel Á. & Nejad Ghafar, Ali & Chaudhari, Ojas Arun & Zirgulis, Giedrius & Lemus, Lenin G., 2022. "Laboratory and numerical study on innovative grouting materials applicable to borehole heat exchangers (BHE) and borehole thermal energy storage (BTES) systems," Renewable Energy, Elsevier, vol. 194(C), pages 788-804.
    13. Xu, Bin & Gan, Wen-tao & Wang, Yang-liang & Chen, Xing-ni & Fei, Yue & Pei, Gang, 2023. "Thermal performance of a novel Trombe wall integrated with direct absorption solar collector based on phase change slurry in winter," Renewable Energy, Elsevier, vol. 213(C), pages 246-258.
    14. Jia, Hongyuan & Pang, Xiufeng & Haves, Philip, 2018. "Experimentally-determined characteristics of radiant systems for office buildings," Applied Energy, Elsevier, vol. 221(C), pages 41-54.
    15. Zhang, Jiangyun & Shao, Dan & Jiang, Liqin & Zhang, Guoqing & Wu, Hongwei & Day, Rodney & Jiang, Wenzhao, 2022. "Advanced thermal management system driven by phase change materials for power lithium-ion batteries: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 159(C).
    16. Krzysztof Dutkowski & Marcin Kruzel, 2023. "The State of the Art on the Flow Characteristic of an Encapsulated Phase-Change Material Slurry," Energies, MDPI, vol. 16(19), pages 1-27, October.
    17. Rathod, Manish K. & Banerjee, Jyotirmay, 2013. "Thermal stability of phase change materials used in latent heat energy storage systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 246-258.
    18. Mandilaras, I.D. & Kontogeorgos, D.A. & Founti, M.A., 2015. "A hybrid methodology for the determination of the effective heat capacity of PCM enhanced building components," Renewable Energy, Elsevier, vol. 76(C), pages 790-804.
    19. Wang, Yi & Xia, Tian Dong & Feng, Hui Xia & Zhang, Han, 2011. "Stearic acid/polymethylmethacrylate composite as form-stable phase change materials for latent heat thermal energy storage," Renewable Energy, Elsevier, vol. 36(6), pages 1814-1820.
    20. Rao, Zhonghao & Wang, Shuangfeng, 2011. "A review of power battery thermal energy management," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(9), pages 4554-4571.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:217:y:2023:i:c:s0960148123010844. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.