IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v183y2022icp369-384.html
   My bibliography  Save this article

Design-eligibility study of solar thermal helically coiled heat exchanging system with annular dimples by irreversibility concept

Author

Listed:
  • Cao, Yan
  • Hashemian, Mehran
  • Ayed, Hamdi
  • Shawabkeh, Ali
  • Issakhov, Alibek
  • Wae-hayee, Makatar

Abstract

This is a numerical research that aims to design several helically grooved coils for solar water heating systems and compare them based on the irreversibility concept. To this end, helical coils with circle, square, horizontal elongated circle (HEC), and vertical elongated circle (VEC) cross-sections were annularly grooved for enhancing heat transfer rate. The Second law analysis in this study was performed based on several variables including flow rate (1–6 lit/min), geometrical, temperature (283–323K), and type of working fluid. Depth and distance of grooves were considered as geometrical parameters. Water, EG (CH2OH)2 (IUPAC name: ethane-1,2-diol), and Theminol-55 were used as heat transfer fluids. Selected fluids make a Pr range of 3.35–744. Various entropy-based indicators were used to select the most optimum condition. Moreover, the interactions between triple thermodynamic domains (energy, entropy, and exergy) were conceptualized. Results demonstrated that for all cases the highest entropy generation can be achieved in the higher flow rates (6 lit/min), also when groove depth and distance are, respectively, 1.3 mm and 20 mm. Case ''VEC'' has the lowest ratio of grooved dimensionless entropy to un-grooved dimensionless entropy.

Suggested Citation

  • Cao, Yan & Hashemian, Mehran & Ayed, Hamdi & Shawabkeh, Ali & Issakhov, Alibek & Wae-hayee, Makatar, 2022. "Design-eligibility study of solar thermal helically coiled heat exchanging system with annular dimples by irreversibility concept," Renewable Energy, Elsevier, vol. 183(C), pages 369-384.
    • Handle: RePEc:eee:renene:v:183:y:2022:i:c:p:369-384
    DOI: 10.1016/j.renene.2021.10.095
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148121015615
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2021.10.095?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Halawa, E. & Chang, K.C. & Yoshinaga, M., 2015. "Thermal performance evaluation of solar water heating systems in Australia, Taiwan and Japan – A comparative review," Renewable Energy, Elsevier, vol. 83(C), pages 1279-1286.
    2. Cao, Yan & Ayed, Hamdi & Hashemian, Mehran & Issakhov, Alibek & Jarad, Fahd & Wae-hayee, Makatar, 2021. "Inducing swirl flow inside the pipes of flat-plate solar collector by using multiple nozzles for enhancing thermal performance," Renewable Energy, Elsevier, vol. 180(C), pages 1344-1357.
    3. Abu-Hamdeh, Nidal H. & Oztop, Hakan F. & Alnefaie, Khalid A. & Wae-hayee, Makatar, 2020. "Hydrothermal irreversibility analysis based on multi-criteria assessment in a modified spiral piping system utilized in solar ponds," Renewable Energy, Elsevier, vol. 162(C), pages 355-370.
    4. Arunkumar, H.S. & Kumar, Shiva & Karanth, K. Vasudeva, 2020. "Analysis of a solar air heater for augmented thermohydraulic performance using helicoidal spring shaped fins-A numerical study," Renewable Energy, Elsevier, vol. 160(C), pages 297-311.
    5. Abu-Hamdeh, Nidal H. & Bantan, Rashad A.R. & Khoshvaght-Aliabadi, Morteza & Alimoradi, Ashkan, 2020. "Effects of ribs on thermal performance of curved absorber tube used in cylindrical solar collectors," Renewable Energy, Elsevier, vol. 161(C), pages 1260-1275.
    6. Vengadesan, Elumalai & Senthil, Ramalingam, 2020. "A review on recent developments in thermal performance enhancement methods of flat plate solar air collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hashemian, Mehran & Jafarmadar, Samad & Khalilarya, Shahram & Faraji, Masoud, 2022. "Energy harvesting feasibility from photovoltaic/thermal (PV/T) hybrid system with Ag/Cr2O3-glycerol nanofluid optical filter," Renewable Energy, Elsevier, vol. 198(C), pages 426-439.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Prasad, Jay Shankar & Datta, Aparesh & Mondal, Sirshendu, 2024. "Flow and thermal behavior of solar air heater with grooved roughness," Renewable Energy, Elsevier, vol. 220(C).
    2. Kumar, Amit & Akshayveer, & Singh, Ajeet Pratap & Singh, O.P., 2022. "Investigations for efficient design of a new counter flow double-pass curved solar air heater," Renewable Energy, Elsevier, vol. 185(C), pages 759-770.
    3. Abdul Ghani Olabi & Nabila Shehata & Hussein M. Maghrabie & Lobna A. Heikal & Mohammad Ali Abdelkareem & Shek Mohammod Atiqure Rahman & Sheikh Khaleduzzaman Shah & Enas Taha Sayed, 2022. "Progress in Solar Thermal Systems and Their Role in Achieving the Sustainable Development Goals," Energies, MDPI, vol. 15(24), pages 1-31, December.
    4. Hu, Jianjun & Lan, Shuhan & Hu, Jingheng, 2024. "A self-driven solar air heater integrated with a thermal energy storage unit: Design and experiment study," Energy, Elsevier, vol. 287(C).
    5. Diego-Ayala, U. & Carrillo, J.G., 2016. "Evaluation of temperature and efficiency in relation to mass flow on a solar flat plate collector in Mexico," Renewable Energy, Elsevier, vol. 96(PA), pages 756-764.
    6. Allouhi, A. & Agrouaz, Y. & Benzakour Amine, Mohammed & Rehman, S. & Buker, M.S. & Kousksou, T. & Jamil, A. & Benbassou, A., 2017. "Design optimization of a multi-temperature solar thermal heating system for an industrial process," Applied Energy, Elsevier, vol. 206(C), pages 382-392.
    7. Ravanji, Abdolvahab & Lee, Ann & Mohammadpour, Javad & Cheng, Shaokoon, 2023. "Critical review on thermohydraulic performance enhancement in channel flows: A comparative study of pin fins," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    8. Liu, Chao & Hashemian, Mehran & Shawabkeh, Ali & Dizaji, Hamed Sadighi & Saleem, S. & Mohideen Batcha, Mohd Faizal & Wae-hayee, Makatar, 2021. "CFD-based irreversibility analysis of avant-garde semi-O/O-shape grooving fashions of solar pond heat trade-off unit," Renewable Energy, Elsevier, vol. 171(C), pages 328-343.
    9. Giglio, T. & Santos, V. & Lamberts, R., 2019. "Analyzing the impact of small solar water heating systems on peak demand and on emissions in the Brazilian context," Renewable Energy, Elsevier, vol. 133(C), pages 1404-1413.
    10. Aziz, Mohamed A. & Elsayed, Ahmed M., 2022. "Thermofluid effects of solar chimney geometry on performance parameters," Renewable Energy, Elsevier, vol. 200(C), pages 674-693.
    11. Gao, Datong & Wu, Lijun & Hao, Yong & Pei, Gang, 2022. "Ultrahigh-efficiency solar energy harvesting via a non-concentrating evacuated aerogel flat-plate solar collector," Renewable Energy, Elsevier, vol. 196(C), pages 1455-1468.
    12. Sheikholeslami, M. & Farshad, Seyyed Ali, 2021. "Investigation of solar collector system with turbulator considering hybrid nanoparticles," Renewable Energy, Elsevier, vol. 171(C), pages 1128-1158.
    13. Salman, Mohammad & Chauhan, Ranchan & Poongavanam, Ganesh Kumar & Kim, Sung Chul, 2022. "Analytical investigation of jet impingement solar air heater with dimple-roughened absorber surface via thermal and effective analysis," Renewable Energy, Elsevier, vol. 199(C), pages 1248-1257.
    14. Azim Doğuş Tuncer & Emine Yağız Gürbüz & Ali Keçebaş & Aleksandar G. Georgiev, 2023. "Experimental Evaluation of a Photovoltaic/Thermal Air Heater with Metal Mesh-Integrated Thermal Energy Storage System," Energies, MDPI, vol. 16(8), pages 1-19, April.
    15. Barone, Giovanni & Buonomano, Annamaria & Kalogirou, Soteris & Ktistis, Panayiotis & Palombo, Adolfo, 2024. "A holistic methodology for designing novel flat plate evacuated solar thermal collectors: Modelling and experimental assessment," Renewable Energy, Elsevier, vol. 232(C).
    16. Sheikhnejad, Yahya & Gandjalikhan Nassab, Seyed Abdolreza, 2021. "Enhancement of solar chimney performance by passive vortex generator," Renewable Energy, Elsevier, vol. 169(C), pages 437-450.
    17. Maraj, Altin & Londo, Andonaq & Gebremedhin, Alemayehu & Firat, Coskun, 2019. "Energy performance analysis of a forced circulation solar water heating system equipped with a heat pipe evacuated tube collector under the Mediterranean climate conditions," Renewable Energy, Elsevier, vol. 140(C), pages 874-883.
    18. Vieira, Abel S. & Stewart, Rodney A. & Lamberts, Roberto & Beal, Cara D., 2018. "Residential solar water heaters in Brisbane, Australia: Key performance parameters and indicators," Renewable Energy, Elsevier, vol. 116(PA), pages 120-132.
    19. Hu, Mingke & Pei, Gang & Wang, Qiliang & Li, Jing & Wang, Yunyun & Ji, Jie, 2016. "Field test and preliminary analysis of a combined diurnal solar heating and nocturnal radiative cooling system," Applied Energy, Elsevier, vol. 179(C), pages 899-908.
    20. Varun Kumar, B. & Manikandan, G. & Rajesh Kanna, P., 2021. "Enhancement of heat transfer in SAH with polygonal and trapezoidal shape of the rib using CFD," Energy, Elsevier, vol. 234(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:183:y:2022:i:c:p:369-384. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.