IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v197y2020ics0951832019301103.html
   My bibliography  Save this article

Reliability analysis for balanced engine systems with m sectors by considering start-up probability

Author

Listed:
  • Fang, Chen
  • Cui, Lirong

Abstract

The research on the reliability of balanced systems has become a hot topic recently. New structures, new balanced mechanisms, and new balanced models for the balanced systems have been developed to extend the study of balanced systems. In order to enrich the research of balanced systems, a new real practical engine balanced system based on the port system is proposed by considering the system structure and the balanced mechanism. This paper studies the reliability for the balanced engine system with the new structure consisting of m sectors in which each sector has n engines. Three models are developed by considering engine start-up rules as the balanced mechanism to re-balance the unbalanced system, then the formulas of reliability for the system, probability density functions and the means for system lifetimes under the two models are obtained by using Laplace transform. In addition, we discuss two special cases when the engine lifetime distribution follows exponential and gamma distributions respectively. Finally, numerical examples are given to illustrate the results obtained in the paper.

Suggested Citation

  • Fang, Chen & Cui, Lirong, 2020. "Reliability analysis for balanced engine systems with m sectors by considering start-up probability," Reliability Engineering and System Safety, Elsevier, vol. 197(C).
    • Handle: RePEc:eee:reensy:v:197:y:2020:i:c:s0951832019301103
    DOI: 10.1016/j.ress.2020.106829
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832019301103
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2020.106829?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. DePoy Smith, Michelle L. & Griffith, William S., 2008. "The analysis and comparison of start-up demonstration tests," European Journal of Operational Research, Elsevier, vol. 186(3), pages 1029-1045, May.
    2. Faddoul, R. & Raphael, W. & Chateauneuf, A., 2018. "Maintenance optimization of series systems subject to reliability constraints," Reliability Engineering and System Safety, Elsevier, vol. 180(C), pages 179-188.
    3. Jia, Heping & Ding, Yi & Peng, Rui & Liu, Hanlin & Song, Yonghua, 2020. "Reliability assessment and activation sequence optimization of non-repairable multi-state generation systems considering warm standby," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    4. Endharta, Alfonsus Julanto & Yun, Won Young & Ko, Young Myoung, 2018. "Reliability evaluation of circular k-out-of-n: G balanced systems through minimal path sets," Reliability Engineering and System Safety, Elsevier, vol. 180(C), pages 226-236.
    5. Levitin, Gregory & Finkelstein, Maxim, 2019. "Optimal loading of elements in series systems exposed to external shocks," Reliability Engineering and System Safety, Elsevier, vol. 192(C).
    6. Martin, Donald E. K., 2004. "Markovian start-up demonstration tests with rejection of units upon observing d failures," European Journal of Operational Research, Elsevier, vol. 155(2), pages 474-486, June.
    7. Levitin, Gregory & Xing, Liudong & Ben-Haim, Hanoch & Huang, Hong-Zong, 2019. "Dynamic demand satisfaction probability of consecutive sliding window systems with warm standby components," Reliability Engineering and System Safety, Elsevier, vol. 189(C), pages 397-405.
    8. Qiu, Qingan & Cui, Lirong & Gao, Hongda & Yi, He, 2018. "Optimal allocation of units in sequential probability series systems," Reliability Engineering and System Safety, Elsevier, vol. 169(C), pages 351-363.
    9. N. Balakrishnan & P. Chan, 2000. "Start-Up Demonstration Tests with Rejection of Units upon Observing d Failures," Annals of the Institute of Statistical Mathematics, Springer;The Institute of Statistical Mathematics, vol. 52(1), pages 184-196, March.
    10. Wu, Bei & Cui, Lirong & Fang, Chen, 2019. "Reliability analysis of semi-Markov systems with restriction on transition times," Reliability Engineering and System Safety, Elsevier, vol. 190(C), pages 1-1.
    11. Lirong Cui & Hongda Gao & Yuchang Mo, 2018. "Reliability for k-out-of-n:F balanced systems with m sectors," IISE Transactions, Taylor & Francis Journals, vol. 50(5), pages 381-393, May.
    12. Wu, Hui & Li, Yan-Fu & Bérenguer, Christophe, 2020. "Optimal inspection and maintenance for a repairable k-out-of-n: G warm standby system," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
    13. Lirong Cui & Jianhui Chen & Xiangchen Li, 2019. "Balanced reliability systems under Markov processes," IISE Transactions, Taylor & Francis Journals, vol. 51(9), pages 1025-1035, September.
    14. Amos E. Gera, 2016. "Different weights of tests within a start‐up demonstration procedure," Applied Stochastic Models in Business and Industry, John Wiley & Sons, vol. 32(1), pages 48-56, January.
    15. Yi, He & Cui, Lirong, 2017. "Distribution and availability for aggregated second-order semi-Markov ternary system with working time omission," Reliability Engineering and System Safety, Elsevier, vol. 166(C), pages 50-60.
    16. Martin, Donald E.K., 2008. "Application of auxiliary Markov chains to start-up demonstration tests," European Journal of Operational Research, Elsevier, vol. 184(2), pages 574-583, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Xiaoyue & Ning, Ru & Zhao, Xian & Wu, Congshan, 2023. "Reliability assessments for two types of balanced systems with multi-state protective devices," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    2. Tian, Tianzi & Yang, Jun & Li, Lei & Wang, Ning, 2023. "Reliability assessment of performance-based balanced systems with rebalancing mechanisms," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    3. Fang, Chen & Cui, Lirong, 2021. "Balanced Systems by Considering Multi-state Competing Risks Under Degradation Processes," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    4. Yin, Juan & Cui, Lirong, 2021. "Reliability for consecutive-k-out-of-n: F systems with shared components between adjacent subsystems," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    5. Fang, Chen & Cui, Lirong, 2021. "Reliability evaluation for balanced systems with auto-balancing mechanisms," Reliability Engineering and System Safety, Elsevier, vol. 213(C).
    6. Zhao, Xian & Wang, Chen & Wang, Siqi, 2024. "Reliability analysis of multi-state balanced systems with standby components switching mechanism," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    7. Wang, Jingjing & Wang, Zongxi & Zheng, Rui, 2021. "Optimal inventory policy for a balanced system subject to hard failure," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    8. Wu, Congshan & Zhao, Xian & Wang, Siqi & Song, Yanbo, 2022. "Reliability analysis of consecutive-k-out-of-r-from-n subsystems: F balanced systems with load sharing," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    9. Liu, Hengchang & Li, Bo & Yao, Fengming & Hu, Gexi & Xie, Lei, 2024. "Maintenance optimization of multi-unit balanced systems using deep reinforcement learning," Reliability Engineering and System Safety, Elsevier, vol. 244(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fang, Chen & Cui, Lirong, 2021. "Balanced Systems by Considering Multi-state Competing Risks Under Degradation Processes," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    2. Xian Zhao, 2014. "On generalized start-up demonstration tests," Annals of Operations Research, Springer, vol. 212(1), pages 225-239, January.
    3. Zhao, Xian & Wang, Xiaoyue & Sun, Ge, 2015. "Start-up demonstration tests with sparse connection," European Journal of Operational Research, Elsevier, vol. 243(3), pages 865-873.
    4. N. Balakrishnan & M. Koutras & F. Milienos, 2014. "Some binary start-up demonstration tests and associated inferential methods," Annals of the Institute of Statistical Mathematics, Springer;The Institute of Statistical Mathematics, vol. 66(4), pages 759-787, August.
    5. Wu, Bei & Cui, Lirong & Fang, Chen, 2020. "Multi-state balanced systems with multiple failure criteria," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
    6. N. Balakrishnan & M. V. Koutras & F. S. Milienos, 2017. "On the identifiability of start-up demonstration mixture models," Annals of the Institute of Statistical Mathematics, Springer;The Institute of Statistical Mathematics, vol. 69(4), pages 717-735, August.
    7. Yangyao, Shi & Xinchen, Zhuang & Tianxiang, Yu & Zijian, Zhang, 2023. "Multi-state balance system reliability research considering load influence," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    8. Wu, Congshan & Zhao, Xian & Wang, Siqi & Song, Yanbo, 2022. "Reliability analysis of consecutive-k-out-of-r-from-n subsystems: F balanced systems with load sharing," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    9. Wang, Siqi & Zhao, Xian & Tian, Zhigang & Zuo, Ming J., 2021. "Optimum component reassignment for balanced systems with multi-state components operating in a shock environment," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    10. Zhao, Xian & Chai, Xiaofei & Sun, Jinglei & Qiu, Qingan, 2021. "Joint optimization of mission abort and component switching policies for multistate warm standby systems," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
    11. Wang, Xiaoyue & Ning, Ru & Zhao, Xian & Wu, Congshan, 2023. "Reliability assessments for two types of balanced systems with multi-state protective devices," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    12. Wang, Xiaoyue & Ning, Ru & Zhao, Xian & Zhou, Jian, 2022. "Reliability analyses of k-out-of-n: F capability-balanced systems in a multi-source shock environment," Reliability Engineering and System Safety, Elsevier, vol. 227(C).
    13. Wang, Siqi & Zhao, Xian & Wu, Congshan & Wang, Xiaoyue, 2023. "Joint optimization of multi-stage component reassignment and preventive maintenance for balanced systems considering imperfect maintenance," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    14. Athanasios Rakitzis & Demetrios Antzoulakos, 2015. "Start-up demonstration tests with three-level classification," Statistical Papers, Springer, vol. 56(1), pages 1-21, February.
    15. Wang, Xiaoyue & Zhao, Xian & Wang, Siqi & Sun, Leping, 2020. "Reliability and maintenance for performance-balanced systems operating in a shock environment," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    16. DePoy Smith, Michelle L. & Griffith, William S., 2008. "The analysis and comparison of start-up demonstration tests," European Journal of Operational Research, Elsevier, vol. 186(3), pages 1029-1045, May.
    17. Fang, Chen & Chen, Jianhui & Qiu, Daizhen, 2024. "Reliability modeling for balanced systems considering mission abort policies," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    18. Gao, Hongda & Cui, Lirong & Yi, He, 2019. "Availability analysis of k-out-of-n: F repairable balanced systems with m sectors," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    19. Zhao, Xian & Han, He & Jiao, Chunhui & Qiu, Qingan, 2024. "Reliability modeling of k-out-of-n: F balanced systems with common bus performance sharing," Reliability Engineering and System Safety, Elsevier, vol. 248(C).
    20. Wang, Wei & Fang, Chao & Wang, Yan & Li, Jin, 2022. "Reliability Modeling and Optimization of Circular Multi-State Sliding Time Window System with Sequential Demands," Reliability Engineering and System Safety, Elsevier, vol. 225(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:197:y:2020:i:c:s0951832019301103. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.