IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v233y2023ics0951832023000029.html
   My bibliography  Save this article

Multi-state balance system reliability research considering load influence

Author

Listed:
  • Yangyao, Shi
  • Xinchen, Zhuang
  • Tianxiang, Yu
  • Zijian, Zhang

Abstract

In past studies of the balanced system, it was often assumed that there were multiple identical units in the system with symmetrically distributed. When a unit in the system fails, the system will shut down the unit, which was symmetrically distributed with the failure unit, to ensure that the system meets the balance requirements. However, in some real engineering cases, the redundancy of the system is low. If we continue completely closing the symmetrical position unit on the system, the system may fail due to insufficient redundancy and the existing model of the balance system is inapplicable. To solve this problem, a general balance system model in which the unit will change its output load rather than completely closing when the system needs to re-establish the balance is proposed in this paper. Furthermore, due to the different reliability of unit corresponding to different loads, using the accelerated failure time model and power law principle, the relationship between different output loads and unit reliability are studied. A new reliability evaluation method is established by using the Markov-Chain approach and obtaining a new multi-state balance system reliability model. Finally, taking the propulsion subsystem of a solar UAV as an example, the effectiveness of the evaluation method is verified.

Suggested Citation

  • Yangyao, Shi & Xinchen, Zhuang & Tianxiang, Yu & Zijian, Zhang, 2023. "Multi-state balance system reliability research considering load influence," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    • Handle: RePEc:eee:reensy:v:233:y:2023:i:c:s0951832023000029
    DOI: 10.1016/j.ress.2023.109087
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832023000029
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2023.109087?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fang, Chen & Cui, Lirong, 2021. "Reliability evaluation for balanced systems with auto-balancing mechanisms," Reliability Engineering and System Safety, Elsevier, vol. 213(C).
    2. Endharta, Alfonsus Julanto & Yun, Won Young & Ko, Young Myoung, 2018. "Reliability evaluation of circular k-out-of-n: G balanced systems through minimal path sets," Reliability Engineering and System Safety, Elsevier, vol. 180(C), pages 226-236.
    3. Wang, Xiaoyue & Ning, Ru & Zhao, Xian & Wu, Congshan, 2023. "Reliability assessments for two types of balanced systems with multi-state protective devices," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    4. Dingguo Hua & Elsayed A. Elsayed, 2018. "Reliability approximation of k-out-of-n pairs: G balanced systems with spatially distributed units," IISE Transactions, Taylor & Francis Journals, vol. 50(7), pages 616-626, July.
    5. Gao, Hongda & Cui, Lirong & Yi, He, 2019. "Availability analysis of k-out-of-n: F repairable balanced systems with m sectors," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    6. Lirong Cui & Hongda Gao & Yuchang Mo, 2018. "Reliability for k-out-of-n:F balanced systems with m sectors," IISE Transactions, Taylor & Francis Journals, vol. 50(5), pages 381-393, May.
    7. Zhao, Xian & Wang, Siqi & Wang, Xiaoyue & Fan, Yu, 2020. "Multi-state balanced systems in a shock environment," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
    8. Wang, Siqi & Zhao, Xian & Tian, Zhigang & Zuo, Ming J., 2021. "Optimum component reassignment for balanced systems with multi-state components operating in a shock environment," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    9. Wu, Bei & Cui, Lirong & Fang, Chen, 2020. "Multi-state balanced systems with multiple failure criteria," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
    10. Lirong Cui & Jianhui Chen & Xiangchen Li, 2019. "Balanced reliability systems under Markov processes," IISE Transactions, Taylor & Francis Journals, vol. 51(9), pages 1025-1035, September.
    11. Fang, Chen & Cui, Lirong, 2021. "Balanced Systems by Considering Multi-state Competing Risks Under Degradation Processes," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    12. Wang, Xiaoyue & Zhao, Xian & Wang, Siqi & Sun, Leping, 2020. "Reliability and maintenance for performance-balanced systems operating in a shock environment," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liu, Hengchang & Li, Bo & Yao, Fengming & Hu, Gexi & Xie, Lei, 2024. "Maintenance optimization of multi-unit balanced systems using deep reinforcement learning," Reliability Engineering and System Safety, Elsevier, vol. 244(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Xiaoyue & Ning, Ru & Zhao, Xian & Wu, Congshan, 2023. "Reliability assessments for two types of balanced systems with multi-state protective devices," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    2. Wang, Xiaoyue & Ning, Ru & Zhao, Xian & Zhou, Jian, 2022. "Reliability analyses of k-out-of-n: F capability-balanced systems in a multi-source shock environment," Reliability Engineering and System Safety, Elsevier, vol. 227(C).
    3. Wang, Siqi & Zhao, Xian & Wu, Congshan & Wang, Xiaoyue, 2023. "Joint optimization of multi-stage component reassignment and preventive maintenance for balanced systems considering imperfect maintenance," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    4. Zhao, Xian & Wang, Chen & Wang, Siqi, 2024. "Reliability analysis of multi-state balanced systems with standby components switching mechanism," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    5. Wang, Siqi & Zhao, Xian & Tian, Zhigang & Zuo, Ming J., 2021. "Optimum component reassignment for balanced systems with multi-state components operating in a shock environment," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    6. Fang, Chen & Chen, Jianhui & Qiu, Daizhen, 2024. "Reliability modeling for balanced systems considering mission abort policies," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    7. Zhao, Xian & Han, He & Jiao, Chunhui & Qiu, Qingan, 2024. "Reliability modeling of k-out-of-n: F balanced systems with common bus performance sharing," Reliability Engineering and System Safety, Elsevier, vol. 248(C).
    8. Fang, Chen & Cui, Lirong, 2021. "Reliability evaluation for balanced systems with auto-balancing mechanisms," Reliability Engineering and System Safety, Elsevier, vol. 213(C).
    9. Wu, Congshan & Zhao, Xian & Wang, Siqi & Song, Yanbo, 2022. "Reliability analysis of consecutive-k-out-of-r-from-n subsystems: F balanced systems with load sharing," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    10. Wang, Jingjing & Qiu, Qingan & Wang, Huanhuan & Lin, Cong, 2021. "Optimal condition-based preventive maintenance policy for balanced systems," Reliability Engineering and System Safety, Elsevier, vol. 211(C).
    11. Fang, Chen & Cui, Lirong, 2021. "Balanced Systems by Considering Multi-state Competing Risks Under Degradation Processes," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    12. Wu, Congshan & Zhao, Xian & Qiu, Qingan & Sun, Jinglei, 2021. "Optimal mission abort policy for k-out-of-n: F balanced systems," Reliability Engineering and System Safety, Elsevier, vol. 208(C).
    13. Liu, Hengchang & Li, Bo & Yao, Fengming & Hu, Gexi & Xie, Lei, 2024. "Maintenance optimization of multi-unit balanced systems using deep reinforcement learning," Reliability Engineering and System Safety, Elsevier, vol. 244(C).
    14. Wu, Congshan & Zhao, Xian & Wang, Xiaoyue & Wang, Siqi, 2021. "Reliability analysis of performance-based balanced systems with common bus performance sharing," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    15. Wang, Xiaoyue & Zhao, Xian & Wang, Siqi & Sun, Leping, 2020. "Reliability and maintenance for performance-balanced systems operating in a shock environment," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    16. Tian, Tianzi & Yang, Jun & Li, Lei & Wang, Ning, 2023. "Reliability assessment of performance-based balanced systems with rebalancing mechanisms," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    17. Wang, Jingjing & Zheng, Rui & Lin, Tianran, 2022. "Maintenance modeling for balanced systems subject to two competing failure modes," Reliability Engineering and System Safety, Elsevier, vol. 225(C).
    18. Yanbo Song & Xiaoyue Wang, 2022. "Reliability Analysis of the Multi-State k -out-of- n : F Systems with Multiple Operation Mechanisms," Mathematics, MDPI, vol. 10(23), pages 1-16, December.
    19. Wu, Bei & Cui, Lirong & Fang, Chen, 2020. "Multi-state balanced systems with multiple failure criteria," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
    20. Zhao, Xian & Qi, Xin & Wang, Xiaoyue, 2023. "Reliability assessment for coherent systems operating under a generalized mixed shock model with multiple change points of the environment," Reliability Engineering and System Safety, Elsevier, vol. 239(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:233:y:2023:i:c:s0951832023000029. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.