IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v129y2014icp19-28.html
   My bibliography  Save this article

Application of risk informed safety margin characterization to extended power uprate analysis

Author

Listed:
  • Dube, Donald A.
  • Sherry, Richard R.
  • Gabor, Jeffery R.
  • Hess, Stephen M.

Abstract

In this paper we present some initial results of the application of a risk-informed safety margin characterization (RISMC) approach to the analysis of the impact of an extended power uprate (EPU) on plant safety for selected transient and accident sequences. These initial applications were conducted to demonstrate the feasibility and practicality of using the RISMC approach to analyze the safety impact of EPUs at both a pressurized water reactor (PWR) and a boiling water reactor (BWR). For the PWR application, the analysis focused on the loss of main feedwater (LOMFW) event with failure of auxiliary feedwater (AFW) where feed and bleed (F&B) cooling is required to prevent core damage. For the BWR case study, station blackout (SBO) sequences leading to core damage were analyzed. A consistent and repeatable process was developed and applied to identify those key parameters that would be analyzed. Distributions were constructed to represent the uncertainties associated with each of the key parameters. These distributions were sampled using a Latin Hypercube Sampling (LHS) technique to generate sets of sample cases that were used in the physics simulation runs using the MAAP4 code. Simulation results were evaluated to determine the changes to safety margins which would occur due to the uprated power conditions; the results obtained were then compared to those for the current nominal full power. The results obtained indicate, as expected, that safety margins may be reduced with increases in plant power level. However, for most power uprate levels, these safety margin reductions were found to be small. A limited study of margin recovery strategies was performed for the PWR case that indicated that minor to moderate changes in plant operation or design could be used to recover the safety margin reduction that would occur from the power uprate.

Suggested Citation

  • Dube, Donald A. & Sherry, Richard R. & Gabor, Jeffery R. & Hess, Stephen M., 2014. "Application of risk informed safety margin characterization to extended power uprate analysis," Reliability Engineering and System Safety, Elsevier, vol. 129(C), pages 19-28.
  • Handle: RePEc:eee:reensy:v:129:y:2014:i:c:p:19-28
    DOI: 10.1016/j.ress.2014.04.008
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832014000763
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.ress.2014.04.008?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sherry, Richard R. & Gabor, Jeffery R. & Hess, Stephen M., 2013. "Pilot application of risk informed safety margin characterization to a total loss of feedwater event," Reliability Engineering and System Safety, Elsevier, vol. 117(C), pages 65-72.
    2. Burgazzi, Luciano, 2007. "State of the art in reliability of thermal-hydraulic passive systems," Reliability Engineering and System Safety, Elsevier, vol. 92(5), pages 671-675.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Alban, Andres & Darji, Hardik A. & Imamura, Atsuki & Nakayama, Marvin K., 2017. "Efficient Monte Carlo methods for estimating failure probabilities," Reliability Engineering and System Safety, Elsevier, vol. 165(C), pages 376-394.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zio, E. & Pedroni, N., 2012. "Monte Carlo simulation-based sensitivity analysis of the model of a thermal–hydraulic passive system," Reliability Engineering and System Safety, Elsevier, vol. 107(C), pages 90-106.
    2. París, C. & Queral, C. & Mula, J. & Gómez-Magán, J. & Sánchez-Perea, M. & Meléndez, E. & Gil, J., 2019. "Quantitative risk reduction by means of recovery strategies," Reliability Engineering and System Safety, Elsevier, vol. 182(C), pages 13-32.
    3. Jin, Kyungho & Kim, Hyeonmin & Ryu, Seunghyoung & Kim, Seunggeun & Park, Jinkyun, 2022. "An approach to constructing effective training data for a classification model to evaluate the reliability of a passive safety system," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    4. Francesco Di Maio & Nicola Pedroni & Barnabás Tóth & Luciano Burgazzi & Enrico Zio, 2021. "Reliability Assessment of Passive Safety Systems for Nuclear Energy Applications: State-of-the-Art and Open Issues," Energies, MDPI, vol. 14(15), pages 1-17, August.
    5. Burgazzi, Luciano, 2008. "About time-variant reliability analysis with reference to passive systems assessment," Reliability Engineering and System Safety, Elsevier, vol. 93(11), pages 1682-1688.
    6. Olatubosun, Samuel Abiodun & Zhang, Zhijian, 2019. "Dependency consideration of passive system reliability by coupled stress-strength interference/functional relations of parameters approach," Reliability Engineering and System Safety, Elsevier, vol. 188(C), pages 549-560.
    7. Pedroni, N. & Zio, E. & Apostolakis, G.E., 2010. "Comparison of bootstrapped artificial neural networks and quadratic response surfaces for the estimation of the functional failure probability of a thermal–hydraulic passive system," Reliability Engineering and System Safety, Elsevier, vol. 95(4), pages 386-395.
    8. Alban, Andres & Darji, Hardik A. & Imamura, Atsuki & Nakayama, Marvin K., 2017. "Efficient Monte Carlo methods for estimating failure probabilities," Reliability Engineering and System Safety, Elsevier, vol. 165(C), pages 376-394.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:129:y:2014:i:c:p:19-28. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.