IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v114y2016icp18-31.html
   My bibliography  Save this article

Circular economy: To be or not to be in a closed product loop? A Life Cycle Assessment of aluminium cans with inclusion of alloying elements

Author

Listed:
  • Niero, Monia
  • Olsen, Stig Irving

Abstract

Packaging, representing the second largest source of aluminium scrap at global level, deserves a key role in the transition towards the circular economy. Life Cycle Assessment (LCA) of aluminium products has been typically based on one life cycle considering pure aluminium flows and neglecting the presence of alloying elements and impurities. However, this simplification undermines the potentials of using LCA to quantify the environmental performances of products in multiple loops, as required in the circular economy. This study aims to investigate the effects of including the actual alloy composition in the LCA of aluminium can production and recycling, in order to understand whether a can-to-can (i.e. closed product loop) recycling should be promoted or not. Mass balance of the main alloying elements (Mn, Si, Cu, Fe) was carried out at increasing levels of recycling rate, corresponding to a temporal interval of five years. Different aluminium packaging scrap sources were considered: mixed packaging aluminium scrap and used beverage can scrap. The outcomes of the mass balance were used to quantify the amount of Mn and primary Al that needs to be reintegrated in each scenario according to the recycling rate and this information was further used to perform an LCA of 30 loops of aluminium can production and recycling, based on the actual alloy composition. The LCA revealed that the closed product loop option (considering used beverage can scrap) has lower climate change impacts over the other recycling scenario using mixed Al packaging scrap. The main recommendation from an LCA methodological point of view is to include the idea of multiple co-functions in the functional unit definition. To further improve the environmental performances of the aluminium beverage can sector towards circular economy implementation the key actions are: to reduce the weight of the lid, to develop methods to separate the body and lid at the point of collection, and to investigate the potentials of a closed supply chain loop for aluminium cans in terms of combined environmental and economic value creation.

Suggested Citation

  • Niero, Monia & Olsen, Stig Irving, 2016. "Circular economy: To be or not to be in a closed product loop? A Life Cycle Assessment of aluminium cans with inclusion of alloying elements," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 18-31.
    • Handle: RePEc:eee:recore:v:114:y:2016:i:c:p:18-31
    DOI: 10.1016/j.resconrec.2016.06.023
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344916301604
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2016.06.023?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Asif, Farazee M.A. & Rashid, Amir & Bianchi, Carmine & Nicolescu, Cornel M., 2015. "System dynamics models for decision making in product multiple lifecycles," Resources, Conservation & Recycling, Elsevier, vol. 101(C), pages 20-33.
    2. Anders Bjørn & Michael Z. Hauschild, 2013. "Absolute versus Relative Environmental Sustainability," Journal of Industrial Ecology, Yale University, vol. 17(2), pages 321-332, April.
    3. Huysman, Sofie & Sala, Serenella & Mancini, Lucia & Ardente, Fulvio & Alvarenga, Rodrigo A.F. & De Meester, Steven & Mathieux, Fabrice & Dewulf, Jo, 2015. "Toward a systematized framework for resource efficiency indicators," Resources, Conservation & Recycling, Elsevier, vol. 95(C), pages 68-76.
    4. Gaustad, Gabrielle & Li, Preston & Kirchain, Randolph, 2007. "Modeling methods for managing raw material compositional uncertainty in alloy production," Resources, Conservation & Recycling, Elsevier, vol. 52(2), pages 180-207.
    5. Sverdrup, Harald U. & Ragnarsdottir, Kristin Vala & Koca, Deniz, 2015. "Aluminium for the future: Modelling the global production, market supply, demand, price and long term development of the global reserves," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 139-154.
    6. Allacker, K. & Mathieux, F. & Manfredi, S. & Pelletier, N. & De Camillis, C. & Ardente, F. & Pant, R., 2014. "Allocation solutions for secondary material production and end of life recovery: Proposals for product policy initiatives," Resources, Conservation & Recycling, Elsevier, vol. 88(C), pages 1-12.
    7. Sevigné-Itoiz, Eva & Gasol, Carles M. & Rieradevall, Joan & Gabarrell, Xavier, 2014. "Environmental consequences of recycling aluminum old scrap in a global market," Resources, Conservation & Recycling, Elsevier, vol. 89(C), pages 94-103.
    8. Christoph Koffler & Julia Florin, 2013. "Tackling the Downcycling Issue—A Revised Approach to Value-Corrected Substitution in Life Cycle Assessment of Aluminum (VCS 2.0)," Sustainability, MDPI, vol. 5(11), pages 1-15, October.
    9. Brogaard, Line K. & Damgaard, Anders & Jensen, Morten B. & Barlaz, Morton & Christensen, Thomas H., 2014. "Evaluation of life cycle inventory data for recycling systems," Resources, Conservation & Recycling, Elsevier, vol. 87(C), pages 30-45.
    10. Gaustad, Gabrielle & Olivetti, Elsa & Kirchain, Randolph, 2012. "Improving aluminum recycling: A survey of sorting and impurity removal technologies," Resources, Conservation & Recycling, Elsevier, vol. 58(C), pages 79-87.
    11. Hatayama, Hiroki & Daigo, Ichiro & Tahara, Kiyotaka, 2014. "Tracking effective measures for closed-loop recycling of automobile steel in China," Resources, Conservation & Recycling, Elsevier, vol. 87(C), pages 65-71.
    12. Hatayama, Hiroki & Daigo, Ichiro & Matsuno, Yasunari & Adachi, Yoshihiro, 2012. "Evolution of aluminum recycling initiated by the introduction of next-generation vehicles and scrap sorting technology," Resources, Conservation & Recycling, Elsevier, vol. 66(C), pages 8-14.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Rodrigo Barraza & Juan M. Sepúlveda & Ivan Derpich, 2022. "Location of the Intermediate Echelon to Add Purchase Value and Sustainability Criteria in a Mining Supply Network," Sustainability, MDPI, vol. 14(19), pages 1-14, October.
    2. Stotz, Philippe Maurice & Niero, Monia & Bey, Niki & Paraskevas, Dimos, 2017. "Environmental screening of novel technologies to increase material circularity: A case study on aluminium cans," Resources, Conservation & Recycling, Elsevier, vol. 127(C), pages 96-106.
    3. Zafar Husain & Annayath Maqbool & Abid Haleem & R. D. Pathak & Danny Samson, 2021. "Analyzing the business models for circular economy implementation: a fuzzy TOPSIS approach," Operations Management Research, Springer, vol. 14(3), pages 256-271, December.
    4. Gabriela Jarrín Jácome & María Fernanda Godoy León & Rodrigo A. F. Alvarenga & Jo Dewulf, 2021. "Tracking the Fate of Aluminium in the EU Using the MaTrace Model," Resources, MDPI, vol. 10(7), pages 1-15, July.
    5. Anna Luthin & Marzia Traverso & Robert H. Crawford, 2024. "Circular life cycle sustainability assessment: An integrated framework," Journal of Industrial Ecology, Yale University, vol. 28(1), pages 41-58, February.
    6. Manju Saroha & Dixit Garg & Sunil Luthra, 2022. "Analyzing the circular supply chain management performance measurement framework: the modified balanced scorecard technique," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 13(2), pages 951-960, June.
    7. Michael Martin & Sjoerd Herlaar & Aiden Jönsson & David Lazarevic, 2022. "From Circular to Linear? Assessing the Life Cycle Environmental and Economic Sustainability of Steel and Plastic Beer Kegs," Circular Economy and Sustainability, Springer, vol. 2(3), pages 937-960, September.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Stotz, Philippe Maurice & Niero, Monia & Bey, Niki & Paraskevas, Dimos, 2017. "Environmental screening of novel technologies to increase material circularity: A case study on aluminium cans," Resources, Conservation & Recycling, Elsevier, vol. 127(C), pages 96-106.
    2. Turner, David A. & Williams, Ian D. & Kemp, Simon, 2015. "Greenhouse gas emission factors for recycling of source-segregated waste materials," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 186-197.
    3. Shen, Angxing & Zhang, Jihong, 2024. "Technologies for CO2 emission reduction and low-carbon development in primary aluminum industry in China: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PA).
    4. Julien Pedneault & Guillaume Majeau‐Bettez & Manuele Margni, 2023. "How much sorting is required for a circular low carbon aluminum economy?," Journal of Industrial Ecology, Yale University, vol. 27(3), pages 977-992, June.
    5. Buchner, Hanno & Laner, David & Rechberger, Helmut & Fellner, Johann, 2017. "Potential recycling constraints due to future supply and demand of wrought and cast Al scrap—A closed system perspective on Austria," Resources, Conservation & Recycling, Elsevier, vol. 122(C), pages 135-142.
    6. Pauliuk, Stefan & Kondo, Yasushi & Nakamura, Shinichiro & Nakajima, Kenichi, 2017. "Regional distribution and losses of end-of-life steel throughout multiple product life cycles—Insights from the global multiregional MaTrace model," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 84-93.
    7. Hatayama, Hiroki & Daigo, Ichiro & Matsuno, Yasunari & Adachi, Yoshihiro, 2012. "Evolution of aluminum recycling initiated by the introduction of next-generation vehicles and scrap sorting technology," Resources, Conservation & Recycling, Elsevier, vol. 66(C), pages 8-14.
    8. Diyamandoglu, Vasil & Fortuna, Lorena M., 2015. "Deconstruction of wood-framed houses: Material recovery and environmental impact," Resources, Conservation & Recycling, Elsevier, vol. 100(C), pages 21-30.
    9. Hu, Nan & Zheng, Bing, 2023. "Natural resources, education, and green economic development," Resources Policy, Elsevier, vol. 86(PB).
    10. Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    11. Karan Bhuwalka & Randolph E. Kirchain & Elsa A. Olivetti & Richard Roth, 2023. "Quantifying the drivers of long‐term prices in materials supply chains," Journal of Industrial Ecology, Yale University, vol. 27(1), pages 141-154, February.
    12. Mohamad El Mehtedi & Pasquale Buonadonna & Mauro Carta & Rayane El Mohtadi & Alessandro Mele & Donato Morea, 2023. "Sustainability Study of a New Solid-State Aluminum Chips Recycling Process: A Life Cycle Assessment Approach," Sustainability, MDPI, vol. 15(14), pages 1-14, July.
    13. Kalogerakis, Katharina & Drabe, Viktoria & Paramasivam, Mugundan & Herstatt, Cornelius, 2015. "Closed-Loop Supply Chains for Cradle to Cradle Products," Chapters from the Proceedings of the Hamburg International Conference of Logistics (HICL), in: Kersten, Wolfgang & Blecker, Thorsten & Ringle, Christian M. (ed.), Sustainability in Logistics and Supply Chain Management: New Designs and Strategies. Proceedings of the Hamburg International Conference of Logistics , volume 21, pages 3-34, Hamburg University of Technology (TUHH), Institute of Business Logistics and General Management.
    14. Esangbedo, Moses Olabhele & Taiwo, Blessing Olamide & Abbas, Hawraa H. & Hosseini, Shahab & Sazid, Mohammed & Fissha, Yewuhalashet, 2024. "Enhancing the exploitation of natural resources for green energy: An application of LSTM-based meta-model for aluminum prices forecasting," Resources Policy, Elsevier, vol. 92(C).
    15. Tomer Fishman & Rupert J. Myers & Orlando Rios & T.E. Graedel, 2018. "Implications of Emerging Vehicle Technologies on Rare Earth Supply and Demand in the United States," Resources, MDPI, vol. 7(1), pages 1-15, January.
    16. Huysman, Sofie & Sala, Serenella & Mancini, Lucia & Ardente, Fulvio & Alvarenga, Rodrigo A.F. & De Meester, Steven & Mathieux, Fabrice & Dewulf, Jo, 2015. "Toward a systematized framework for resource efficiency indicators," Resources, Conservation & Recycling, Elsevier, vol. 95(C), pages 68-76.
    17. Chen, Wu & Wang, Minxi & Li, Xin, 2016. "Analysis of copper flows in the United States: 1975–2012," Resources, Conservation & Recycling, Elsevier, vol. 111(C), pages 67-76.
    18. Rui Zhao & Han Su & Xiaolang Chen & Yanni Yu, 2016. "Commercially Available Materials Selection in Sustainable Design: An Integrated Multi-Attribute Decision Making Approach," Sustainability, MDPI, vol. 8(1), pages 1-15, January.
    19. Chen, Minpeng & Sun, Fu & Shindo, Junko, 2016. "China’s agricultural nitrogen flows in 2011: Environmental assessment and management scenarios," Resources, Conservation & Recycling, Elsevier, vol. 111(C), pages 10-27.
    20. Pegoretti, Thaís dos Santos & Mathieux, Fabrice & Evrard, Damien & Brissaud, Daniel & Arruda, José Roberto de França, 2014. "Use of recycled natural fibres in industrial products: A comparative LCA case study on acoustic components in the Brazilian automotive sector," Resources, Conservation & Recycling, Elsevier, vol. 84(C), pages 1-14.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:114:y:2016:i:c:p:18-31. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.