IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v235y2021ics0925527321000645.html
   My bibliography  Save this article

Integrated disassembly line balancing and routing problem with mobile additive manufacturing

Author

Listed:
  • Diri Kenger, Zülal
  • Koç, Çağrı
  • Özceylan, Eren

Abstract

This paper introduces the integrated disassembly line balancing and routing problem with mobile additive manufacturing (I-DLB-RP-MAM). In the I-DLB-RP-MAM, end-of-life products are first disassembled in a single disassembly center, and a vehicle equipped with a 3D printer then dispatches both recycled and 3D printed components to the customers, i.e. remanufacturing centers. Several demanded components are obtained in disassembly center and the remaining amounts are produced by 3D printer en-route. We formulate a non-linear mathematical programming model for the I-DLB-RP-MAM. We conduct experiments on a numerical example-based on a real product. Scenario analysis is conducted and results show that additive manufacturing technology can be successfully incorporated into the supply chain. We obtain significant improvements such as reduction in inventory and total cost.

Suggested Citation

  • Diri Kenger, Zülal & Koç, Çağrı & Özceylan, Eren, 2021. "Integrated disassembly line balancing and routing problem with mobile additive manufacturing," International Journal of Production Economics, Elsevier, vol. 235(C).
    • Handle: RePEc:eee:proeco:v:235:y:2021:i:c:s0925527321000645
    DOI: 10.1016/j.ijpe.2021.108088
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527321000645
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2021.108088?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Seda Hezer & Yakup Kara, 2015. "A network-based shortest route model for parallel disassembly line balancing problem," International Journal of Production Research, Taylor & Francis Journals, vol. 53(6), pages 1849-1865, March.
    2. Schniederjans, Dara G. & Curado, Carla & Khalajhedayati, Mehrnaz, 2020. "Supply chain digitisation trends: An integration of knowledge management," International Journal of Production Economics, Elsevier, vol. 220(C).
    3. Katrin Oettmeier & Erik Hofmann, 2017. "Additive manufacturing technology adoption: an empirical analysis of general and supply chain-related determinants," Journal of Business Economics, Springer, vol. 87(1), pages 97-124, January.
    4. Beltagui, Ahmad & Kunz, Nathan & Gold, Stefan, 2020. "The role of 3D printing and open design on adoption of socially sustainable supply chain innovation," International Journal of Production Economics, Elsevier, vol. 221(C).
    5. Afshari, Hamid & Searcy, Cory & Jaber, Mohamad Y., 2020. "The role of eco-innovation drivers in promoting additive manufacturing in supply chains," International Journal of Production Economics, Elsevier, vol. 223(C).
    6. Mojtaba Khorram Niaki & Fabio Nonino, 2017. "Additive manufacturing management: a review and future research agenda," International Journal of Production Research, Taylor & Francis Journals, vol. 55(5), pages 1419-1439, March.
    7. Chan, Hing Kai & Griffin, James & Lim, Jia Jia & Zeng, Fangli & Chiu, Anthony S.F., 2018. "The impact of 3D Printing Technology on the supply chain: Manufacturing and legal perspectives," International Journal of Production Economics, Elsevier, vol. 205(C), pages 156-162.
    8. Habibi, M.K. Khakim & Battaïa, Olga & Cung, Van-Dat & Dolgui, Alexandre, 2017. "Collection-disassembly problem in reverse supply chain," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 334-344.
    9. Delic, Mia & Eyers, Daniel R., 2020. "The effect of additive manufacturing adoption on supply chain flexibility and performance: An empirical analysis from the automotive industry," International Journal of Production Economics, Elsevier, vol. 228(C).
    10. Zülal Diri Kenger & Çağrı Koç & Eren Özceylan, 2020. "Integrated disassembly line balancing and routing problem," International Journal of Production Research, Taylor & Francis Journals, vol. 58(23), pages 7250-7268, December.
    11. Devika Kannan & Kiran Garg & P. C. Jha & Ali Diabat, 2017. "Integrating disassembly line balancing in the planning of a reverse logistics network from the perspective of a third party provider," Annals of Operations Research, Springer, vol. 253(1), pages 353-376, June.
    12. Jimenez, Mariano & Arenas, Mar & Bilbao, Amelia & Rodri'guez, M. Victoria, 2007. "Linear programming with fuzzy parameters: An interactive method resolution," European Journal of Operational Research, Elsevier, vol. 177(3), pages 1599-1609, March.
    13. Özceylan, Eren & Paksoy, Turan & Bektaş, Tolga, 2014. "Modeling and optimizing the integrated problem of closed-loop supply chain network design and disassembly line balancing," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 61(C), pages 142-164.
    14. Satya S. Malladi & Alan L. Erera & Chelsea C. White, 2020. "A dynamic mobile production capacity and inventory control problem," IISE Transactions, Taylor & Francis Journals, vol. 52(8), pages 926-943, August.
    15. Mohr, Sebastian & Khan, Omera, 2015. "3D Printing and Supply Chains of the Future," Chapters from the Proceedings of the Hamburg International Conference of Logistics (HICL), in: Kersten, Wolfgang & Blecker, Thorsten & Ringle, Christian M. (ed.), Innovations and Strategies for Logistics and Supply Chains: Technologies, Business Models and Risk Management. Proceedings of the Hamburg Internationa, volume 20, pages 147-174, Hamburg University of Technology (TUHH), Institute of Business Logistics and General Management.
    16. Caviggioli, Federico & Ughetto, Elisa, 2019. "A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society," International Journal of Production Economics, Elsevier, vol. 208(C), pages 254-268.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    2. Cui, Weiwei & Yang, Yiran & Di, Lei, 2023. "Modeling and optimization for static-dynamic routing of a vehicle with additive manufacturing equipment," International Journal of Production Economics, Elsevier, vol. 257(C).
    3. Liang, Wei & Zhang, Zeqiang & Yin, Tao & Zhang, Yu & Wu, Tengfei, 2023. "Modelling and optimisation of energy consumption and profit-oriented multi-parallel partial disassembly line balancing problem," International Journal of Production Economics, Elsevier, vol. 262(C).
    4. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    5. He, Junkai & Chu, Feng & Dolgui, Alexandre & Anjos, Miguel F., 2024. "Multi-objective disassembly line balancing and related supply chain management problems under uncertainty: Review and future trends," International Journal of Production Economics, Elsevier, vol. 272(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    2. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    3. Battaïa, Olga & Dolgui, Alexandre, 2022. "Hybridizations in line balancing problems: A comprehensive review on new trends and formulations," International Journal of Production Economics, Elsevier, vol. 250(C).
    4. Tan Ching Ng & Sie Yee Lau & Morteza Ghobakhloo & Masood Fathi & Meng Suan Liang, 2022. "The Application of Industry 4.0 Technological Constituents for Sustainable Manufacturing: A Content-Centric Review," Sustainability, MDPI, vol. 14(7), pages 1-21, April.
    5. Harshad Sonar & Vivek Khanzode & Milind Akarte, 2022. "Additive Manufacturing Enabled Supply Chain Management: A Review and Research Directions," Vision, , vol. 26(2), pages 147-162, June.
    6. Hettiarachchi, Biman Darshana & Brandenburg, Marcus & Seuring, Stefan, 2022. "Connecting additive manufacturing to circular economy implementation strategies: Links, contingencies and causal loops," International Journal of Production Economics, Elsevier, vol. 246(C).
    7. Turkcan, Hulya & Imamoglu, Salih Zeki & Ince, Huseyin, 2022. "To be more innovative and more competitive in dynamic environments: The role of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 246(C).
    8. Beltagui, Ahmad & Gold, Stefan & Kunz, Nathan & Reiner, Gerald, 2023. "Special Issue: Rethinking operations and supply chain management in light of the 3D printing revolution," International Journal of Production Economics, Elsevier, vol. 255(C).
    9. Naghshineh, Bardia & Ribeiro, André & Jacinto, Celeste & Carvalho, Helena, 2021. "Social impacts of additive manufacturing: A stakeholder-driven framework," Technological Forecasting and Social Change, Elsevier, vol. 164(C).
    10. Stornelli, Aldo & Ozcan, Sercan & Simms, Christopher, 2021. "Advanced manufacturing technology adoption and innovation: A systematic literature review on barriers, enablers, and innovation types," Research Policy, Elsevier, vol. 50(6).
    11. Sun, Luoyi & Hua, Guowei & Cheng, T.C.E. & Wang, Yixiao, 2020. "How to price 3D-printed products? Pricing strategy for 3D printing platforms," International Journal of Production Economics, Elsevier, vol. 226(C).
    12. Robert B. Handfield & James Aitken & Neil Turner & Tillmann Boehme & Cecil Bozarth, 2022. "Assessing Adoption Factors for Additive Manufacturing: Insights from Case Studies," Logistics, MDPI, vol. 6(2), pages 1-22, June.
    13. Çil, Zeynel Abidin & Öztop, Hande & Diri Kenger, Zülal & Kizilay, Damla, 2023. "Integrating distributed disassembly line balancing and vehicle routing problem in supply chain: Integer programming, constraint programming, and heuristic algorithms," International Journal of Production Economics, Elsevier, vol. 265(C).
    14. He, Junkai & Chu, Feng & Dolgui, Alexandre & Anjos, Miguel F., 2024. "Multi-objective disassembly line balancing and related supply chain management problems under uncertainty: Review and future trends," International Journal of Production Economics, Elsevier, vol. 272(C).
    15. Culot, Giovanna & Orzes, Guido & Sartor, Marco & Nassimbeni, Guido, 2020. "The future of manufacturing: A Delphi-based scenario analysis on Industry 4.0," Technological Forecasting and Social Change, Elsevier, vol. 157(C).
    16. Li, Wei & Sun, Hui & Tong, Meng & Mustafee, Navonil & Koh, Lenny, 2024. "Customizing customization in a 3D printing-enabled hybrid manufacturing supply chain," International Journal of Production Economics, Elsevier, vol. 268(C).
    17. Harm-Jan Steenhuis & Xin Fang & Tolga Ulusemre, 2020. "Global Diffusion of Innovation during the Fourth Industrial Revolution: The Case of Additive Manufacturing or 3D Printing," International Journal of Innovation and Technology Management (IJITM), World Scientific Publishing Co. Pte. Ltd., vol. 17(01), pages 1-34, February.
    18. Jianhua Cao & Xuhui Xia & Lei Wang & Zelin Zhang & Xiang Liu, 2019. "A Novel Multi-Efficiency Optimization Method for Disassembly Line Balancing Problem," Sustainability, MDPI, vol. 11(24), pages 1-16, December.
    19. José M. González-Varona & David Poza & Fernando Acebes & Félix Villafáñez & Javier Pajares & Adolfo López-Paredes, 2020. "New Business Models for Sustainable Spare Parts Logistics: A Case Study," Sustainability, MDPI, vol. 12(8), pages 1-16, April.
    20. Radu Godina & Inês Ribeiro & Florinda Matos & Bruna T. Ferreira & Helena Carvalho & Paulo Peças, 2020. "Impact Assessment of Additive Manufacturing on Sustainable Business Models in Industry 4.0 Context," Sustainability, MDPI, vol. 12(17), pages 1-21, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:235:y:2021:i:c:s0925527321000645. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.