IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v131y2011i1p63-68.html
   My bibliography  Save this article

Exact and approximate calculation of the cycle service level in periodic review inventory policies

Author

Listed:
  • Cardós, Manuel
  • Babiloni, Eugenia

Abstract

The parameters of stock policies are usually determined to minimize costs while satisfying a target service level. In a periodic review policy the time between reviews can be selected to minimize costs while the order-up-to-level is based on the fulfilment of a target service level. Generally, the calculation of this service measurement is obtained using approximations based on an additional hypothesis related to the demand pattern. Previous research has shown that there is a substantial difference between exact and approximate calculations in some general circumstances, so in these cases the service level is not accomplished or the stock level is overestimated. Although an exact calculation of CSL was developed in previous work, the computational effort required to apply it in practical environments leads to the proposal of two approximate methods (PI and PII) that, with the classic approximation, are analysed and evaluated in this paper. This analysis points out the risks of using the classic approximation and leads one to suggest PII as the most suitable and accurate enough procedure to compute the CSL straightforwardly in practice. Additionally, a heuristic approach based on PII is proposed to accept or reject an inventory policy in terms of fulfilling a given target CSL. This paper focuses on uncorrelated, discrete and stationary demand with a known distribution pattern and without backlog.

Suggested Citation

  • Cardós, Manuel & Babiloni, Eugenia, 2011. "Exact and approximate calculation of the cycle service level in periodic review inventory policies," International Journal of Production Economics, Elsevier, vol. 131(1), pages 63-68, May.
    • Handle: RePEc:eee:proeco:v:131:y:2011:i:1:p:63-68
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925-5273(10)00192-1
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. A A Syntetos & J E Boylan & J D Croston, 2005. "On the categorization of demand patterns," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(5), pages 495-503, May.
    2. L W G Strijbosch & R M J Heuts & E H M van der Schoot, 2000. "A combined forecast—inventory control procedure for spare parts," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 51(10), pages 1184-1192, October.
    3. M Cardós & C Miralles & L Ros, 2006. "An exact calculation of the cycle service level in a generalized periodic review system," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 57(10), pages 1252-1255, October.
    4. Leven, Erik & Segerstedt, Anders, 2004. "Inventory control with a modified Croston procedure and Erlang distribution," International Journal of Production Economics, Elsevier, vol. 90(3), pages 361-367, August.
    5. Janssen, Fred & Heuts, Ruud & de Kok, Ton, 1998. "On the (R, s, Q) inventory model when demand is modelled as a compound Bernoulli process," European Journal of Operational Research, Elsevier, vol. 104(3), pages 423-436, February.
    6. Syntetos, Aris A. & Boylan, John E., 2006. "On the stock control performance of intermittent demand estimators," International Journal of Production Economics, Elsevier, vol. 103(1), pages 36-47, September.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Vargas, Vicente & Metters, Richard, 2011. "A master production scheduling procedure for stochastic demand and rolling planning horizons," International Journal of Production Economics, Elsevier, vol. 132(2), pages 296-302, August.
    2. Chia-Nan Wang & Thanh-Tuan Dang & Ngoc-Ai-Thy Nguyen, 2020. "A Computational Model for Determining Levels of Factors in Inventory Management Using Response Surface Methodology," Mathematics, MDPI, vol. 8(8), pages 1-23, July.
    3. Disney, Stephen M. & Gaalman, Gerard J.C. & Hedenstierna, Carl Philip T. & Hosoda, Takamichi, 2015. "Fill rate in a periodic review order-up-to policy under auto-correlated normally distributed, possibly negative, demand," International Journal of Production Economics, Elsevier, vol. 170(PB), pages 501-512.
    4. Dreyfuss, Michael & Giat, Yahel, 2019. "Allocating spares to maximize the window fill rate in a periodic review inventory system," International Journal of Production Economics, Elsevier, vol. 214(C), pages 151-162.
    5. Guijarro, Ester & Cardós, Manuel & Babiloni, Eugenia, 2012. "On the exact calculation of the fill rate in a periodic review inventory policy under discrete demand patterns," European Journal of Operational Research, Elsevier, vol. 218(2), pages 442-447.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Boylan, J.E. & Syntetos, A.A., 2007. "The accuracy of a Modified Croston procedure," International Journal of Production Economics, Elsevier, vol. 107(2), pages 511-517, June.
    2. Sinan Apak, 2015. "A Bayesian Approach Proposal For Inventory Cost and Demand Forecasting," Alphanumeric Journal, Bahadir Fatih Yildirim, vol. 3(2), pages 41-48, December.
    3. Pinçe, Çerağ & Turrini, Laura & Meissner, Joern, 2021. "Intermittent demand forecasting for spare parts: A Critical review," Omega, Elsevier, vol. 105(C).
    4. Strijbosch, Leo W.G. & Syntetos, Aris A. & Boylan, John E. & Janssen, Elleke, 2011. "On the interaction between forecasting and stock control: The case of non-stationary demand," International Journal of Production Economics, Elsevier, vol. 133(1), pages 470-480, September.
    5. Teunter, Ruud & Sani, Babangida, 2009. "Calculating order-up-to levels for products with intermittent demand," International Journal of Production Economics, Elsevier, vol. 118(1), pages 82-86, March.
    6. Altay, Nezih & Rudisill, Frank & Litteral, Lewis A., 2008. "Adapting Wright's modification of Holt's method to forecasting intermittent demand," International Journal of Production Economics, Elsevier, vol. 111(2), pages 389-408, February.
    7. Bacchetti, Andrea & Saccani, Nicola, 2012. "Spare parts classification and demand forecasting for stock control: Investigating the gap between research and practice," Omega, Elsevier, vol. 40(6), pages 722-737.
    8. Babai, Zied & Boylan, John E. & Kolassa, Stephan & Nikolopoulos, Konstantinos, 2016. "Supply chain forecasting: Theory, practice, their gap and the futureAuthor-Name: Syntetos, Aris A," European Journal of Operational Research, Elsevier, vol. 252(1), pages 1-26.
    9. Wallström, Peter & Segerstedt, Anders, 2010. "Evaluation of forecasting error measurements and techniques for intermittent demand," International Journal of Production Economics, Elsevier, vol. 128(2), pages 625-636, December.
    10. Kourentzes, Nikolaos, 2013. "Intermittent demand forecasts with neural networks," International Journal of Production Economics, Elsevier, vol. 143(1), pages 198-206.
    11. Pierre Dodin & Jingyi Xiao & Yossiri Adulyasak & Neda Etebari Alamdari & Lea Gauthier & Philippe Grangier & Paul Lemaitre & William L. Hamilton, 2023. "Bombardier Aftermarket Demand Forecast with Machine Learning," Interfaces, INFORMS, vol. 53(6), pages 425-445, November.
    12. Kourentzes, Nikolaos, 2014. "On intermittent demand model optimisation and selection," International Journal of Production Economics, Elsevier, vol. 156(C), pages 180-190.
    13. Gutierrez, Rafael S. & Solis, Adriano O. & Mukhopadhyay, Somnath, 2008. "Lumpy demand forecasting using neural networks," International Journal of Production Economics, Elsevier, vol. 111(2), pages 409-420, February.
    14. Pennings, Clint L.P. & van Dalen, Jan & van der Laan, Erwin A., 2017. "Exploiting elapsed time for managing intermittent demand for spare parts," European Journal of Operational Research, Elsevier, vol. 258(3), pages 958-969.
    15. Syntetos, Aris A. & Nikolopoulos, Konstantinos & Boylan, John E. & Fildes, Robert & Goodwin, Paul, 2009. "The effects of integrating management judgement into intermittent demand forecasts," International Journal of Production Economics, Elsevier, vol. 118(1), pages 72-81, March.
    16. Ye, Yuan & Lu, Yonggang & Robinson, Powell & Narayanan, Arunachalam, 2022. "An empirical Bayes approach to incorporating demand intermittency and irregularity into inventory control," European Journal of Operational Research, Elsevier, vol. 303(1), pages 255-272.
    17. Boylan, John E. & Babai, M. Zied, 2016. "On the performance of overlapping and non-overlapping temporal demand aggregation approaches," International Journal of Production Economics, Elsevier, vol. 181(PA), pages 136-144.
    18. Syntetos, Aris A. & Boylan, John E., 2010. "On the variance of intermittent demand estimates," International Journal of Production Economics, Elsevier, vol. 128(2), pages 546-555, December.
    19. Syntetos, A.A. & Teunter, R.H., 2014. "On the calculation of safety stocks," Research Report 14003-OPERA, University of Groningen, Research Institute SOM (Systems, Organisations and Management).
    20. K Nikolopoulos & A A Syntetos & J E Boylan & F Petropoulos & V Assimakopoulos, 2011. "An aggregate–disaggregate intermittent demand approach (ADIDA) to forecasting: an empirical proposition and analysis," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 62(3), pages 544-554, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:131:y:2011:i:1:p:63-68. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.