IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v128y2010i1p368-378.html
   My bibliography  Save this article

Life cycle cost for technology selection: A Case study in the manufacturing of injection moulds

Author

Listed:
  • Folgado, R.
  • Peças, P.
  • Henriques, E.

Abstract

During mould design phase different approaches are envisaged to materialize part production and they must be evaluated not only in technological criteria, but also in an economical perspective. However, the comparison of such alternative approaches is not always evident for the mould designer. The solution proposed in this paper, based on the development of a life cycle cost model, fosters its application as a methodology to compare two mould manufacturing alternatives: a spray metal shell mould backfilled with a resin and aluminium powder resin and a conventional machined aluminium mould. A better mould or a better alternative is the one that incurs in fewer life cycle costs, assuming that the injected part is produced within a conformed quality.

Suggested Citation

  • Folgado, R. & Peças, P. & Henriques, E., 2010. "Life cycle cost for technology selection: A Case study in the manufacturing of injection moulds," International Journal of Production Economics, Elsevier, vol. 128(1), pages 368-378, November.
    • Handle: RePEc:eee:proeco:v:128:y:2010:i:1:p:368-378
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925-5273(10)00279-3
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ramasesh, Ranga & Tirupati, Devanath & Vaitsos, Constantin A., 2010. "Modeling process-switching decisions under product life cycle uncertainty," International Journal of Production Economics, Elsevier, vol. 126(2), pages 236-246, August.
    2. Chiang, Tzu-An & Trappey, Amy J.C., 2007. "Development of value chain collaborative model for product lifecycle management and its LCD industry adoption," International Journal of Production Economics, Elsevier, vol. 109(1-2), pages 90-104, September.
    3. Qian, Li & Ben-Arieh, David, 2008. "Parametric cost estimation based on activity-based costing: A case study for design and development of rotational parts," International Journal of Production Economics, Elsevier, vol. 113(2), pages 805-818, June.
    4. Bullinger, Hans-Jorg, 1999. "Turbulent times require creative thinking: New European concepts in production management," International Journal of Production Economics, Elsevier, vol. 60(1), pages 9-27, April.
    5. Johnson, Michael & Kirchain, Randolph, 2009. "Quantifying the effects of parts consolidation and development costs on material selection decisions: A process-based costing approach," International Journal of Production Economics, Elsevier, vol. 119(1), pages 174-186, May.
    6. Jiang, R. & Zhang, W. J. & Ji, P., 2003. "Required characteristics of statistical distribution models for life cycle cost estimation," International Journal of Production Economics, Elsevier, vol. 83(2), pages 185-194, February.
    7. Jiang, R. & Zhang, W. J. & Ji, P., 2004. "Selecting the best alternative based on life-cycle cost distributions of alternatives," International Journal of Production Economics, Elsevier, vol. 89(1), pages 69-75, May.
    8. Tang, Ou & Grubbstrom, Robert W. & Zanoni, Simone, 2007. "Planned lead time determination in a make-to-order remanufacturing system," International Journal of Production Economics, Elsevier, vol. 108(1-2), pages 426-435, July.
    9. Li, Minbo & Wang, Jianguo & Wong, Yoke San & Lee, Kim Seng, 2005. "A collaborative application portal for the mould industry," International Journal of Production Economics, Elsevier, vol. 96(2), pages 233-247, May.
    10. Wu, Chin-Chun & Lin, Pei-Chun & Chou, Chao-Yu, 2006. "Determination of price and warranty length for a normal lifetime distributed product," International Journal of Production Economics, Elsevier, vol. 102(1), pages 95-107, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Quintana, Guillem & Ciurana, Joaquim, 2011. "Cost estimation support tool for vertical high speed machines based on product characteristics and productivity requirements," International Journal of Production Economics, Elsevier, vol. 134(1), pages 188-195, November.
    2. Saccani, Nicola & Perona, Marco & Bacchetti, Andrea, 2017. "The total cost of ownership of durable consumer goods: A conceptual model and an empirical application," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 1-13.
    3. Zębala, Wojciech & Plaza, Malgorzata, 2014. "Comparative study of 3- and 5-axis CNC centers for free-form machining of difficult-to-cut material," International Journal of Production Economics, Elsevier, vol. 158(C), pages 345-358.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Duffner, Fabian & Mauler, Lukas & Wentker, Marc & Leker, Jens & Winter, Martin, 2021. "Large-scale automotive battery cell manufacturing: Analyzing strategic and operational effects on manufacturing costs," International Journal of Production Economics, Elsevier, vol. 232(C).
    2. Johnson, Michael D. & Kirchain, Randolph E., 2009. "Quantifying the effects of product family decisions on material selection: A process-based costing approach," International Journal of Production Economics, Elsevier, vol. 120(2), pages 653-668, August.
    3. Niu, Baozhuang & Ruan, Yiyuan & Yu, Xinhu, 2024. "Purchasing new for remanufacturing: Sourcing co-opetition, tax-planning and data validation," International Journal of Production Economics, Elsevier, vol. 273(C).
    4. Darghouth, M.N. & Ait-kadi, D. & Chelbi, A., 2017. "Joint optimization of design, warranty and price for products sold with maintenance service contracts," Reliability Engineering and System Safety, Elsevier, vol. 165(C), pages 197-208.
    5. Louly, Mohamed-Aly & Dolgui, Alexandre, 2011. "Optimal time phasing and periodicity for MRP with POQ policy," International Journal of Production Economics, Elsevier, vol. 131(1), pages 76-86, May.
    6. Sharif, Amir M. & Irani, Zahir, 2012. "Supply Chain Leadership," International Journal of Production Economics, Elsevier, vol. 140(1), pages 57-68.
    7. Zębala, Wojciech & Plaza, Malgorzata, 2014. "Comparative study of 3- and 5-axis CNC centers for free-form machining of difficult-to-cut material," International Journal of Production Economics, Elsevier, vol. 158(C), pages 345-358.
    8. Jha, Aditya & Fernandes, Kiran & Xiong, Yu & Nie, Jiajia & Agarwal, Neelesh & Tiwari, Manoj K., 2017. "Effects of demand forecast and resource sharing on collaborative new product development in supply chain," International Journal of Production Economics, Elsevier, vol. 193(C), pages 207-221.
    9. Chauhan, Satyaveer S. & Dolgui, Alexandre & Proth, Jean-Marie, 2009. "A continuous model for supply planning of assembly systems with stochastic component procurement times," International Journal of Production Economics, Elsevier, vol. 120(2), pages 411-417, August.
    10. Qian, Li, 2011. "Product price and performance level in one market or two separated markets under various cost structures and functions," International Journal of Production Economics, Elsevier, vol. 131(2), pages 505-518, June.
    11. Roy, Rajkumar & Colmer, Scott & Griggs, Terry, 2005. "Estimating the cost of a new technology intensive automotive product: A case study approach," International Journal of Production Economics, Elsevier, vol. 97(2), pages 210-226, August.
    12. Sima Sabahi & Mahour M. Parast, 2023. "An operations and supply chain management perspective to product innovation," Operations Management Research, Springer, vol. 16(2), pages 808-829, June.
    13. Bao, Xing & Tang, Ou & Ji, Jianhua, 2008. "Applying the minimum relative entropy method for bimodal distribution in a remanufacturing system," International Journal of Production Economics, Elsevier, vol. 113(2), pages 969-979, June.
    14. Gansterer, Margaretha & Almeder, Christian & Hartl, Richard F., 2014. "Simulation-based optimization methods for setting production planning parameters," International Journal of Production Economics, Elsevier, vol. 151(C), pages 206-213.
    15. Wen-Hsien Tsai, 2018. "Carbon Taxes and Carbon Right Costs Analysis for the Tire Industry," Energies, MDPI, vol. 11(8), pages 1-22, August.
    16. Chul-Seung Hong & Eul-Bum Lee, 2018. "Power Plant Economic Analysis: Maximizing Lifecycle Profitability by Simulating Preliminary Design Solutions of Steam-Cycle Conditions," Energies, MDPI, vol. 11(9), pages 1-21, August.
    17. Jain, Tarun & Hazra, Jishnu, 2017. "Dual sourcing under suppliers' capacity investments," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 103-115.
    18. Prasanta Kumar Ghosh & Amalesh Kumar Manna & Jayanta Kumar Dey & Samarjit Kar, 2023. "Optimal production run in an imperfect production process with maintenance under warranty and product insurance," OPSEARCH, Springer;Operational Research Society of India, vol. 60(2), pages 720-752, June.
    19. Esmaeili, M. & Shamsi Gamchi, N. & Asgharizadeh, E., 2014. "Three-level warranty service contract among manufacturer, agent and customer: A game-theoretical approach," European Journal of Operational Research, Elsevier, vol. 239(1), pages 177-186.
    20. Gansterer, Margaretha, 2015. "Aggregate planning and forecasting in make-to-order production systems," International Journal of Production Economics, Elsevier, vol. 170(PB), pages 521-528.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:128:y:2010:i:1:p:368-378. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.