IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i10p5797-5804.html
   My bibliography  Save this article

A novel household refrigerator with shape-stabilized PCM (Phase Change Material) heat storage condensers: An experimental investigation

Author

Listed:
  • Cheng, Wen-Long
  • Mei, Bao-Jun
  • Liu, Yi-Ning
  • Huang, Yong-Hua
  • Yuan, Xu-Dong

Abstract

In this study, a kind of shape-stabilized phase change material (PCM) was adopted for constructing heat storage condensers. And a novel household refrigerator equipped with the heat storage condensers was setup based on an ordinary double-door three-star compartment refrigerator. The experimental investigation on the characteristics of the novel refrigerator and an ordinary refrigerator was carried out under the ISO standard test conditions. For the novel refrigerator, part of the condensation heat was stored in the shape-stabilized PCM during the on-time and discharged to the environment while the compressor was off. Therefore, the heat dissipation of the novel refrigerator was continuous during a complete cycle (including a successive on-time and off-time period), different from the intermittent heat dissipation of the ordinary setup. Thus, the overall heat-transfer performances of the condensers could be significantly improved, which resulted in a lower condensation temperature, a higher evaporation temperature and a much larger subcooling degree at the condenser outlet. Compared to the ordinary refrigerator, the total cycle time and the ratio of on-time to the total cycle time of the novel refrigerator were much smaller, which led to more frequent starts of the compressor but lower energy consumption. Experiments demonstrated that the novel refrigerator could increase the energy efficiency by about 12% with only little increase of the cost.

Suggested Citation

  • Cheng, Wen-Long & Mei, Bao-Jun & Liu, Yi-Ning & Huang, Yong-Hua & Yuan, Xu-Dong, 2011. "A novel household refrigerator with shape-stabilized PCM (Phase Change Material) heat storage condensers: An experimental investigation," Energy, Elsevier, vol. 36(10), pages 5797-5804.
  • Handle: RePEc:eee:energy:v:36:y:2011:i:10:p:5797-5804
    DOI: 10.1016/j.energy.2011.08.050
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544211005901
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2011.08.050?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Gholap, A.K. & Khan, J.A., 2007. "Design and multi-objective optimization of heat exchangers for refrigerators," Applied Energy, Elsevier, vol. 84(12), pages 1226-1239, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Pirvaram, A. & Sadrameli, S.M. & Abdolmaleki, L., 2019. "Energy management of a household refrigerator using eutectic environmental friendly PCMs in a cascaded condition," Energy, Elsevier, vol. 181(C), pages 321-330.
    2. Kousksou, T. & Mahdaoui, M. & Ahmed, A. & Msaad, A. Ait, 2014. "Melting over a wavy surface in a rectangular cavity heated from below," Energy, Elsevier, vol. 64(C), pages 212-219.
    3. Du, Kun & Calautit, John & Wang, Zhonghua & Wu, Yupeng & Liu, Hao, 2018. "A review of the applications of phase change materials in cooling, heating and power generation in different temperature ranges," Applied Energy, Elsevier, vol. 220(C), pages 242-273.
    4. Hossieny, Nemat & Shrestha, Som S. & Owusu, Osei A. & Natal, Manuel & Benson, Rick & Desjarlais, Andre, 2019. "Improving the energy efficiency of a refrigerator-freezer through the use of a novel cabinet/door liner based on polylactide biopolymer," Applied Energy, Elsevier, vol. 235(C), pages 1-9.
    5. Macek, Karel & Mařík, Karel, 2012. "A methodology for quantitative comparison of control solutions and its application to HVAC (heating, ventilation and air conditioning) systems," Energy, Elsevier, vol. 44(1), pages 117-125.
    6. Nie, Binjian & Zou, Boyang & She, Xiaohui & Zhang, Tongtong & Li, Yongliang & Ding, Yulong, 2020. "Development of a heat transfer coefficient based design method of a thermal energy storage device for transport air-conditioning applications," Energy, Elsevier, vol. 196(C).
    7. Kazemi, M. & Hosseini, M.J. & Ranjbar, A.A. & Bahrampoury, R., 2018. "Improvement of longitudinal fins configuration in latent heat storage systems," Renewable Energy, Elsevier, vol. 116(PA), pages 447-457.
    8. Sarı, Ahmet & Alkan, Cemil & Bilgin, Cahit, 2014. "Micro/nano encapsulation of some paraffin eutectic mixtures with poly(methyl methacrylate) shell: Preparation, characterization and latent heat thermal energy storage properties," Applied Energy, Elsevier, vol. 136(C), pages 217-227.
    9. Huang, Yi-Huan & Cheng, Yi-Xin & Zhao, Rui & Cheng, Wen-Long, 2020. "A high heat storage capacity form-stable composite phase change material with enhanced flame retardancy," Applied Energy, Elsevier, vol. 262(C).
    10. Umair, Malik Muhammad & Zhang, Yuang & Iqbal, Kashif & Zhang, Shufen & Tang, Bingtao, 2019. "Novel strategies and supporting materials applied to shape-stabilize organic phase change materials for thermal energy storage–A review," Applied Energy, Elsevier, vol. 235(C), pages 846-873.
    11. Marques, A.C. & Davies, G.F. & Evans, J.A. & Maidment, G.G. & Wood, I.D., 2013. "Theoretical modelling and experimental investigation of a thermal energy storage refrigerator," Energy, Elsevier, vol. 55(C), pages 457-465.
    12. Rocha, Thiago Torres Martins & Teggar, Mohamed & Trevizoli, Paulo Vinicius & de Oliveira, Raphael Nunes, 2023. "Potential of latent thermal energy storage for performance improvement in small-scale refrigeration units: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 187(C).
    13. Luís Sousa Rodrigues & Daniel Lemos Marques & Jorge Augusto Ferreira & Vítor António Ferreira Costa & Nelson Dias Martins & Fernando José Neto Da Silva, 2022. "The Load Shifting Potential of Domestic Refrigerators in Smart Grids: A Comprehensive Review," Energies, MDPI, vol. 15(20), pages 1-36, October.
    14. Yu Sun & Rijing Zhao & Yikun Yang & Dong Huang, 2022. "Experimental and Numerical Study on Fan-Supplied Condenser Deterioration under Built-In Condition and Its Corresponding Refrigerator Performance," Energies, MDPI, vol. 15(22), pages 1-14, November.
    15. Cheng, Wen-Long & Yuan, Xu-Dong, 2013. "Numerical analysis of a novel household refrigerator with shape-stabilized PCM (phase change material) heat storage condensers," Energy, Elsevier, vol. 59(C), pages 265-276.
    16. Seok-Joon Lee & Seul-Hyun Park, 2018. "An Experimental Investigation of Thermal Characteristics of Phase Change Material Applied to Improve the Isothermal Operation of a Refrigerator," Energies, MDPI, vol. 11(8), pages 1-14, August.
    17. Fang, Guiyin & Tang, Fang & Cao, Lei, 2014. "Preparation, thermal properties and applications of shape-stabilized thermal energy storage materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 237-259.
    18. Khan, Mohammed Mumtaz A. & Saidur, R. & Al-Sulaiman, Fahad A., 2017. "A review for phase change materials (PCMs) in solar absorption refrigeration systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 105-137.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xu, Yun-Chao & Chen, Qun, 2013. "A theoretical global optimization method for vapor-compression refrigeration systems based on entransy theory," Energy, Elsevier, vol. 60(C), pages 464-473.
    2. Luo, Xianglong & Yi, Zhitong & Zhang, Bingjian & Mo, Songping & Wang, Chao & Song, Mengjie & Chen, Ying, 2017. "Mathematical modelling and optimization of the liquid separation condenser used in organic Rankine cycle," Applied Energy, Elsevier, vol. 185(P2), pages 1309-1323.
    3. Stephen Ntiri Asomani & Jianping Yuan & Longyan Wang & Desmond Appiah & Kofi Asamoah Adu-Poku, 2020. "The Impact of Surrogate Models on the Multi-Objective Optimization of Pump-As-Turbine (PAT)," Energies, MDPI, vol. 13(9), pages 1-29, May.
    4. Cheng, Wen-Long & Yuan, Xu-Dong, 2013. "Numerical analysis of a novel household refrigerator with shape-stabilized PCM (phase change material) heat storage condensers," Energy, Elsevier, vol. 59(C), pages 265-276.
    5. Bahadori, Alireza, 2011. "Simple method for estimation of effectiveness in one tube pass and one shell pass counter-flow heat exchangers," Applied Energy, Elsevier, vol. 88(11), pages 4191-4196.
    6. Rishikesh Sharma & Dipti Prasad Mishra & Marek Wasilewski & Lakhbir Singh Brar, 2023. "Application of Response Surface Methodology and Artificial Neural Network to Optimize the Curved Trapezoidal Winglet Geometry for Enhancing the Performance of a Fin-and-Tube Heat Exchanger," Energies, MDPI, vol. 16(10), pages 1-30, May.
    7. Hossieny, Nemat & Shrestha, Som S. & Owusu, Osei A. & Natal, Manuel & Benson, Rick & Desjarlais, Andre, 2019. "Improving the energy efficiency of a refrigerator-freezer through the use of a novel cabinet/door liner based on polylactide biopolymer," Applied Energy, Elsevier, vol. 235(C), pages 1-9.
    8. Shao, Liang-Liang & Yang, Liang & Zhang, Chun-Lu, 2010. "Comparison of heat pump performance using fin-and-tube and microchannel heat exchangers under frost conditions," Applied Energy, Elsevier, vol. 87(4), pages 1187-1197, April.
    9. Yin, Qian & Du, Wen-Jing & Ji, Xing-Lin & Cheng, Lin, 2016. "Optimization design and economic analyses of heat recovery exchangers on rotary kilns," Applied Energy, Elsevier, vol. 180(C), pages 743-756.
    10. Lee, Su Kyoung & Lee, Jae Won & Lee, Hoseong & Chung, Jin Taek & Kang, Yong Tae, 2019. "Optimal design of generators for H2O/LiBr absorption chiller with multi-heat sources," Energy, Elsevier, vol. 167(C), pages 47-59.
    11. Khaled, Mahmoud & Harambat, Fabien & Hage, Hicham El & Peerhossaini, Hassan, 2011. "Spatial optimization of an underhood cooling module – Towards an innovative control approach," Applied Energy, Elsevier, vol. 88(11), pages 3841-3849.
    12. Geyer, Philipp & Schlüter, Arno, 2014. "Automated metamodel generation for Design Space Exploration and decision-making – A novel method supporting performance-oriented building design and retrofitting," Applied Energy, Elsevier, vol. 119(C), pages 537-556.
    13. Sanaye, Sepehr & Dehghandokht, Masoud, 2011. "Modeling and multi-objective optimization of parallel flow condenser using evolutionary algorithm," Applied Energy, Elsevier, vol. 88(5), pages 1568-1577, May.
    14. Mallikarjun, Sreekanth & Lewis, Herbert F., 2014. "Energy technology allocation for distributed energy resources: A strategic technology-policy framework," Energy, Elsevier, vol. 72(C), pages 783-799.
    15. Rashidi, Saman & Kashefi, Mohammad Hossein & Kim, Kyung Chun & Samimi-Abianeh, Omid, 2019. "Potentials of porous materials for energy management in heat exchangers – A comprehensive review," Applied Energy, Elsevier, vol. 243(C), pages 206-232.
    16. Khaled, Mahmoud & Mangi, Fareed & Hage, Hisham El & Harambat, Fabien & Peerhossaini, Hassan, 2012. "Fan air flow analysis and heat transfer enhancement of vehicle underhood cooling system – Towards a new control approach for fuel consumption reduction," Applied Energy, Elsevier, vol. 91(1), pages 439-450.
    17. Manjunath, K. & Kaushik, S.C., 2014. "Second law thermodynamic study of heat exchangers: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 348-374.
    18. Guo, Jiangfeng & Xu, Mingtian & Cheng, Lin, 2009. "The application of field synergy number in shell-and-tube heat exchanger optimization design," Applied Energy, Elsevier, vol. 86(10), pages 2079-2087, October.
    19. Silvia Macchitella & Gianpiero Colangelo & Giuseppe Starace, 2023. "Performance Prediction of Plate-Finned Tube Heat Exchangers for Refrigeration: A Review on Modeling and Optimization Methods," Energies, MDPI, vol. 16(4), pages 1-30, February.
    20. Belman-Flores, J.M. & Barroso-Maldonado, J.M. & Rodríguez-Muñoz, A.P. & Camacho-Vázquez, G., 2015. "Enhancements in domestic refrigeration, approaching a sustainable refrigerator – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 955-968.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:10:p:5797-5804. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.