IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v288y2024ics0360544223032334.html
   My bibliography  Save this article

Mode transition control law analysis of ammonia MIPCC aeroengine considering inlet–compressor safety matching

Author

Listed:
  • Lv, Chengkun
  • Huang, Qian
  • Wang, Ziao
  • Chang, Juntao
  • Yu, Daren

Abstract

Inlet–Compressor (I–C) safety matching is a key technology for successfully implementing the mode transition of a turbine-based combined-cycle (TBCC) engine. To investigate the performance variation in Ammonia mass injection pre-compressor cooling (MIPCC) aeroengines (AMAs) during the mode transition, a model considering inlet–compressor engine safety matching was developed in this study. We provide a computation for the inlet unstart margin ξ which considers the positive shock wave assumption, I–C flow conservation equation, and combined inlet characteristics to assess the degree of I–C matching. Furthermore, the AMA characteristics indicate that the total pressure recovery coefficient of the hypersonic combined inlet has significantly affects the engine performance. The restraint ξ also ensures engine safety. A control law guided by ξ and the combustor outlet temperature (ξ–COT) was proposed to enhance the specific impulse and specific thrust of the AMA. Compared with the speed and COT control laws, the specific impulse and specific thrust were maximally improved by 2.93 % and 5.47 %, respectively, when ξ = 0.2. Both were further improved by 5.91 % and 10.49 %, respectively, when ξ = 0.1. Finally, the high-thrust performance results of the AMA, with the optimized control law ξ–COT during the mode transition process, were obtained.

Suggested Citation

  • Lv, Chengkun & Huang, Qian & Wang, Ziao & Chang, Juntao & Yu, Daren, 2024. "Mode transition control law analysis of ammonia MIPCC aeroengine considering inlet–compressor safety matching," Energy, Elsevier, vol. 288(C).
    • Handle: RePEc:eee:energy:v:288:y:2024:i:c:s0360544223032334
    DOI: 10.1016/j.energy.2023.129839
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223032334
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.129839?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yu, Xuanfei & Wang, Cong & Yu, Daren, 2019. "Precooler-design & engine-performance conjugated optimization for fuel direct precooled airbreathing propulsion," Energy, Elsevier, vol. 170(C), pages 546-556.
    2. Ma, Xiaofeng & Jiang, Peixue & Zhu, Yinhai, 2023. "Modeling and performance analysis of a pre-cooling and power generation system based on the supercritical CO2 Brayton cycle on turbine-based combined cycle engines," Energy, Elsevier, vol. 284(C).
    3. Jiamao Luo & Shengfang Huang & Shunhua Yang & Wanzhou Zhang & Zhongqiang Mu, 2022. "Effect of Water Injection on Turbine Inlet under Different Flight Conditions," Energies, MDPI, vol. 15(19), pages 1-16, October.
    4. Cai, Changpeng & Chen, Haoying & Fang, Juan & Zheng, Qiangang & Chen, Cheng & Zhang, Haibo, 2023. "Thermodynamic analysis of a novel precooled supersonic turbine engine based on aircraft/engine integrated optimal design," Energy, Elsevier, vol. 280(C).
    5. Li, Hui & Zou, Zhengping & Chen, Yiming & Du, Pengcheng & Fu, Chao & Wang, Yifan, 2023. "Experimental insights into thermal performance of a microtube precooler with drastic coolant properties variation and precooling impacts on turbojet engine operation," Energy, Elsevier, vol. 278(PA).
    6. Lv, Chengkun & Huang, Qian & Chang, Juntao & Wang, Ziao & Zheng, Jialin & Yu, Daren, 2023. "Mode transition path optimization for turbine-based combined-cycle ramjet stage under uncertainty propagation of integrated airframe-propulsion system," Energy, Elsevier, vol. 268(C).
    7. Zhang, Duo & Chen, Chen & Yu, Xuanfei, 2023. "Control law synthetizing for an innovative indirect precooled airbreathing engine under off-design operation conditions," Energy, Elsevier, vol. 263(PE).
    8. Wang, Cong & Yu, Xuanfei & Pan, Xin & Qin, Jiang & Huang, Hongyan, 2022. "Thermodynamic optimization of the indirect precooled engine cycle using the method of cascade utilization of cold sources," Energy, Elsevier, vol. 238(PB).
    9. Pan, Xin & Xiong, Yuefei & Wang, Cong & Qin, Jiang & Zhang, Silong & Bao, Wen, 2022. "Performance analysis of precooled turbojet engine with a low-temperature endothermic fuel," Energy, Elsevier, vol. 248(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lv, Chengkun & Lan, Zhu & Wang, Ziao & Chang, Juntao & Yu, Daren, 2024. "Intelligent ammonia precooling control for TBCC mode transition based on neural network improved equilibrium manifold expansion model," Energy, Elsevier, vol. 288(C).
    2. Wang, Cong & Feng, Yu & Liu, Zekuan & Wang, Yilin & Fang, Jiwei & Qin, Jiang & Shao, Jiahui & Huang, Hongyan, 2022. "Assessment of thermodynamic performance and CO2 emission reduction for a supersonic precooled turbine engine cycle fueled with a new green fuel of ammonia," Energy, Elsevier, vol. 261(PA).
    3. Wang, Cong & Yu, Xuanfei & Ha, Chan & Liu, Zekuan & Fang, Jiwei & Qin, Jiang & Shao, Jiahui & Huang, Hongyan, 2023. "Thermodynamic analysis for a novel chemical precooling turbojet engine based on a multi-stage precooling-compression cycle," Energy, Elsevier, vol. 262(PA).
    4. Ma, Xiaofeng & Jiang, Peixue & Zhu, Yinhai, 2023. "Modeling and performance analysis of a pre-cooling and power generation system based on the supercritical CO2 Brayton cycle on turbine-based combined cycle engines," Energy, Elsevier, vol. 284(C).
    5. Wen, Jie & Wan, Chenxi & Xu, Guoqiang & Zhuang, Laihe & Dong, Bensi & Chen, Junjie, 2024. "Optimization of thermal management system architecture in hydrogen engine employing improved genetic algorithm," Energy, Elsevier, vol. 297(C).
    6. Li, Hui & Zou, Zhengping & Chen, Yiming & Du, Pengcheng & Fu, Chao & Wang, Yifan, 2023. "Experimental insights into thermal performance of a microtube precooler with drastic coolant properties variation and precooling impacts on turbojet engine operation," Energy, Elsevier, vol. 278(PA).
    7. Cheng, Kunlin & Qin, Jiang & Zhang, Duo & Bao, Wen & Jing, Wuxing, 2022. "Performance evaluation for a combined power generation system of closed-Brayton-cycle and thermoelectric generator with finite cold source at room temperature on hypersonic vehicles," Energy, Elsevier, vol. 254(PC).
    8. Deng, Li & Chen, Min & Tang, Hailong & Zhang, Jiyuan, 2024. "Performance evaluation of multicombustor engine for Mach3+-Level propulsion system," Energy, Elsevier, vol. 295(C).
    9. Pan, Xin & Xiong, Yuefei & Wang, Cong & Qin, Jiang & Zhang, Silong & Bao, Wen, 2022. "Performance analysis of precooled turbojet engine with a low-temperature endothermic fuel," Energy, Elsevier, vol. 248(C).
    10. Lv, Chengkun & Huang, Qian & Lan, Zhu & Chang, Juntao & Yu, Daren, 2023. "Parametric optimization and exergy analysis of a high mach number aeroengine with an ammonia mass injection pre-compressor cooling cycle," Energy, Elsevier, vol. 282(C).
    11. Yu, Xuanfei & Wang, Cong & Yu, Daren, 2020. "Series view method based thermodynamic modeling and analysis for innovative precooled aeroengines with different turbine-compressor coupling schemes," Energy, Elsevier, vol. 205(C).
    12. Wang, Cong & Yu, Xuanfei & Pan, Xin & Qin, Jiang & Huang, Hongyan, 2022. "Thermodynamic optimization of the indirect precooled engine cycle using the method of cascade utilization of cold sources," Energy, Elsevier, vol. 238(PB).
    13. Luo, Qiaodan & Zhao, Shengfeng & Zhou, Shiji & Yao, Lipan & Yang, Chengwu & Lu, Xingen & Zhu, Junqiang, 2024. "Influence of diversified dihedral stator on the thermodynamic performance and flow loss characteristics of a variable core driven fan stage," Energy, Elsevier, vol. 294(C).
    14. Jia, Xingyun & Zhou, Dengji, 2024. "Multi-variable anti-disturbance controller with state-dependent switching law for adaptive cycle engine," Energy, Elsevier, vol. 288(C).
    15. Cai, Changpeng & Chen, Haoying & Fang, Juan & Zheng, Qiangang & Chen, Cheng & Zhang, Haibo, 2023. "Thermodynamic analysis of a novel precooled supersonic turbine engine based on aircraft/engine integrated optimal design," Energy, Elsevier, vol. 280(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:288:y:2024:i:c:s0360544223032334. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.