IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v282y2023ics0360544223021217.html
   My bibliography  Save this article

Influence of aerodynamic pressure on dust removal by supersonic siphon atomization

Author

Listed:
  • Tian, Zhang
  • Mu, Xinsheng
  • Deji, Jing
  • Shaocheng, Ge
  • Xiangxi, Meng
  • Shuli, Zhao
  • Xiaowei, Zhang

Abstract

At present, there are many problems in coal mine operation, such as formation of large amounts of dust, complex dust migration behavior, severe respiratory harm, poor on-site performance of spray dust removal technology under windy conditions, and low collection efficiency of respirable dust. To solve the above problems, the finite element method of computational fluid dynamics (CFD) was used. The Spalart-Allmaras turbulence model of COMSOL software and the tracking module for atomized particles broken by droplets were used. They were combined with the Fraunhofer diffraction principle to study the distributions of the velocity of the airflow field, droplet size, droplet velocity and wind resistance for a supersonic water siphonic atomization device. The influence of the above factors on dust removal at different aerodynamic pressures was studied experimentally. The relationships between spray characteristics, flow field velocity distribution, dust removal effect and spray characteristics were revealed. The research showed that with increasing pressure, the supersonic component accounted for an increased proportion of the flow field inside the nozzle, average velocity of the flow field increased, atomization efficiency increased, droplet particle size decreased, and droplet velocity increased. The particle size of the droplets first increased, then decreased and then increased with increasing spraying distance. Additionally, the range of high-speed fine droplet size fog increased with increasing pressure. At the same transverse wind speed, with increasing pressure, the deflection point of the fog field moved backward, and the wind resistance of the spray was enhanced. With the increase in aerodynamic pressure, the dust isolation and negative pressure effect of spray and the dust collection efficiency increased, and there was an optimal value for dust removal in a limited space. The reason was that when the pressure increased to a certain extent, the air flow reversed in the coil at the bottom of the limited space, which blew the dust that was not aggregated at the bottom away from the area where dust was falling. Thus, the dust was entrained in fog droplets but could not be removed from the air flow. The dust dispersion in the air flow after purification differed greatly at different pressures because the removal efficiency of dust in the 2.5–10 μm particle size range was mainly affected by the pressure. In a field study of a fully mechanized mining face, the fog curtain formed by the device covered the whole section under the condition of airflow disturbance with large transverse velocity, and the comprehensive respirable dust removal efficiency of the working area reached 92.3%. Thus, this method showed good wind resistance and dust removal performance. The study of this technology can provide a clean working environment and theoretical guidance for the safe production of coal in the future, especially for fully mechanized mining faces.

Suggested Citation

  • Tian, Zhang & Mu, Xinsheng & Deji, Jing & Shaocheng, Ge & Xiangxi, Meng & Shuli, Zhao & Xiaowei, Zhang, 2023. "Influence of aerodynamic pressure on dust removal by supersonic siphon atomization," Energy, Elsevier, vol. 282(C).
  • Handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223021217
    DOI: 10.1016/j.energy.2023.128727
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223021217
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2023.128727?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Du, Tao & Nie, Wen & Chen, Dawei & Xiu, Zihao & Yang, Bo & Liu, Qiang & Guo, Lidian, 2020. "CFD modeling of coal dust migration in an 8.8-meter-high fully mechanized mining face," Energy, Elsevier, vol. 212(C).
    2. Hua, Yun & Nie, Wen & Liu, Qiang & Yin, Shuai & Peng, Huitian, 2020. "Effect of wind curtain on dust extraction in rock tunnel working face: CFD and field measurement analysis," Energy, Elsevier, vol. 197(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Islamova, A.G. & Shlegel, N.E. & Strizhak, P.A., 2024. "Influence of collision conditions between aerosol flows of liquid droplets and solid particles typical for wet vortex dust collectors," Energy, Elsevier, vol. 298(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sheng Wang & Xuelong Li & Qizhi Qin, 2022. "Study on Surrounding Rock Control and Support Stability of Ultra-Large Height Mining Face," Energies, MDPI, vol. 15(18), pages 1-20, September.
    2. Nie, Wen & Cha, Xingpeng & Bao, Qiu & Peng, Huitian & Xu, Changwei & Zhang, Shaobo & Zhang, Xu & Ma, Qingxin & Guo, Cheng & Yi, Shixing & Jiang, Chenwang, 2023. "Study on dust pollution suppression of mine wind-assisted spray device based on orthogonal test and CFD simulation," Energy, Elsevier, vol. 263(PB).
    3. Lu, Xin-xiao & Wang, Cheng-yan & Shen, Cong & Wang, Ming-yang & Xing, Yun, 2022. "Verisimilar research on the dust movement in the underground tunneling at the roadheader cutterhead dynamic rotation," Energy, Elsevier, vol. 238(PC).
    4. Xi Chen & Hao Zhang & Shaocheng Ge & Cunbao Deng & Chaonan Fan & Guoliang Ma & Weichao Li, 2022. "Research on the Dust Diffusion and Pollution Behaviour of Dynamic Tunneling in Header Excavators Based on Dynamic Mesh Technology and Field Measurement," Energies, MDPI, vol. 15(23), pages 1-28, November.
    5. Cai, Peng & Liu, Zhenyi & Li, Pengliang & Zhao, Yao & Li, Mingzhi & Li, Ranran & Wang, Chen & Xiu, Zihao, 2023. "Effects of fuel component, airflow field and obstacles on explosion characteristics of hydrogen/methane mixtures fuel," Energy, Elsevier, vol. 265(C).
    6. Huiuk Yi & Minsik Kim & Dongkil Lee & Jongmyung Park, 2022. "Applications of Computational Fluid Dynamics for Mine Ventilation in Mineral Development," Energies, MDPI, vol. 15(22), pages 1-24, November.
    7. Xie, Sen & Yu, Haiming & Ye, Yuxi & Zhao, Junwei & Hou, Chuangen & Zhao, Dongliang, 2023. "Research on a new method of “blocking-sealing” dust control and removal in fully mechanized heading face," Energy, Elsevier, vol. 283(C).
    8. Gan, Jian & Wang, Deming & Xiao, Zhongmin & Wang, Ya-nan & Zhang, Kang & Zhu, Xiaolong & Li, Shuailong, 2023. "Experimental and molecular dynamics investigations of the effects of ionic surfactants on the wettability of low-rank coal," Energy, Elsevier, vol. 271(C).
    9. Jiang, Bingyou & Ji, Ben & Yuan, Liang & Yu, Chang-Fei & Tao, Wenhan & Zhou, Yu & Wang, Haoyu & Wang, Xiao-Han & Liao, Maolin, 2023. "Experimental and molecular dynamics simulation study of the ionic liquids’ chain-length on wetting of bituminous coal," Energy, Elsevier, vol. 283(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223021217. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.