IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v242y2022ics0360544221031923.html
   My bibliography  Save this article

Solar-thermal conversion investigation using surface partition method for a cavity receiver with helical pipe

Author

Listed:
  • Chongzhe, Zou
  • Yanping, Zhang
  • Falcoz, Quentin
  • Neveu, Pierre

Abstract

To develop solar energy technology, the cavity receiver research is worth paying attention to. Instead of considering the cavity as a whole object, the surface of the cavity, exposed to solar radiation, is divided into five sections: the external front cover, the throat, the inner front cover, the pipe surface, and the bottom. Three critical parameters were investigated: the loops number nloop, the distance from focus point to aperture center lf-a, and the aperture diameter dap. Coupling Monte-Carlo Ray Tracing method, an optical simulation model was proposed, heat flux distributions and cavity absorption efficiencies were solved. The results showed that the optimum absorption efficiency achieved 87.44% at 6 loops and 184 mm aperture diameter. If the lf-a was less than −130 mm, the external front cover and bottom would risk the melting, while the heat flux of hot spots was higher than 1.3 × 106 W/m2. The throat was damaged by large lf-a (130 mm) and small dap (184 mm), since the heat flux was higher than 2.1 × 106 W/m2. Summarily, this method can help to detect extremely high heat flux, to prevent hot melt phenomena, then to avoid safety risk of cavity receiver.

Suggested Citation

  • Chongzhe, Zou & Yanping, Zhang & Falcoz, Quentin & Neveu, Pierre, 2022. "Solar-thermal conversion investigation using surface partition method for a cavity receiver with helical pipe," Energy, Elsevier, vol. 242(C).
    • Handle: RePEc:eee:energy:v:242:y:2022:i:c:s0360544221031923
    DOI: 10.1016/j.energy.2021.122943
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221031923
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.122943?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Li, Sha & Xu, Guoqiang & Luo, Xiang & Quan, Yongkai & Ge, Yunting, 2016. "Optical performance of a solar dish concentrator/receiver system: Influence of geometrical and surface properties of cavity receiver," Energy, Elsevier, vol. 113(C), pages 95-107.
    2. Zhang, Yanping & Xiao, Hu & Zou, Chongzhe & Falcoz, Quentin & Neveu, Pierre, 2020. "Combined optics and heat transfer numerical model of a solar conical receiver with built-in helical pipe," Energy, Elsevier, vol. 193(C).
    3. Li, Yuqiang & Liu, Gang & Liu, Xianping & Liao, Shengming, 2016. "Thermodynamic multi-objective optimization of a solar-dish Brayton system based on maximum power output, thermal efficiency and ecological performance," Renewable Energy, Elsevier, vol. 95(C), pages 465-473.
    4. Soltani, Sara & Bonyadi, Mohammad & Madadi Avargani, Vahid, 2019. "A novel optical-thermal modeling of a parabolic dish collector with a helically baffled cylindrical cavity receiver," Energy, Elsevier, vol. 168(C), pages 88-98.
    5. Daabo, Ahmed M. & Mahmoud, Saad & Al-Dadah, Raya K., 2016. "The effect of receiver geometry on the optical performance of a small-scale solar cavity receiver for parabolic dish applications," Energy, Elsevier, vol. 114(C), pages 513-525.
    6. Wang, Kun & He, Ya-Ling & Qiu, Yu & Zhang, Yuwen, 2016. "A novel integrated simulation approach couples MCRT and Gebhart methods to simulate solar radiation transfer in a solar power tower system with a cavity receiver," Renewable Energy, Elsevier, vol. 89(C), pages 93-107.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sedighi, Mohammadreza & Padilla, Ricardo Vasquez & Rose, Andrew & Taylor, Robert A., 2022. "Optical analysis of a semi-transparent packed bed of spheres for next-generation volumetric solar receivers," Energy, Elsevier, vol. 252(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kasaeian, Alibakhsh & Kouravand, Amir & Vaziri Rad, Mohammad Amin & Maniee, Siavash & Pourfayaz, Fathollah, 2021. "Cavity receivers in solar dish collectors: A geometric overview," Renewable Energy, Elsevier, vol. 169(C), pages 53-79.
    2. Hassan, Atazaz & Quanfang, Chen & Abbas, Sajid & Lu, Wu & Youming, Luo, 2021. "An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator," Renewable Energy, Elsevier, vol. 179(C), pages 1849-1864.
    3. Sun, Lulening & Zong, Chenggang & Yu, Liang & Huang, Weidong, 2019. "Evaluation of solar brightness distribution models for performance simulation and optimization of solar dish," Energy, Elsevier, vol. 180(C), pages 192-205.
    4. Martínez-Manuel, Leopoldo & Wang, Wujun & Laumert, Björn & Peña-Cruz, Manuel I., 2021. "Numerical analysis on the optical geometrical optimization for an axial type impinging solar receiver," Energy, Elsevier, vol. 216(C).
    5. Liu, Fanmao & Wu, Ke & Rao, Zaixing & Peng, Youduo, 2019. "Spatial layouts and absorbing surface design of heater tube arrays of direct-illumination receiver used in high power dish/stirling system," Energy, Elsevier, vol. 188(C).
    6. Soltani, Sara & Bonyadi, Mohammad & Madadi Avargani, Vahid, 2019. "A novel optical-thermal modeling of a parabolic dish collector with a helically baffled cylindrical cavity receiver," Energy, Elsevier, vol. 168(C), pages 88-98.
    7. Yanping, Zhang & Yuxuan, Chen & Chongzhe, Zou & Hu, Xiao & Falcoz, Quentin & Neveu, Pierre & Cheng, Zhang & Xiaohong, Huang, 2021. "Experimental investigation on heat-transfer characteristics of a cylindrical cavity receiver with pressurized air in helical pipe," Renewable Energy, Elsevier, vol. 163(C), pages 320-330.
    8. Zhang, Li & Fang, Jiabin & Wei, Jinjia & Yang, Guidong, 2017. "Numerical investigation on the thermal performance of molten salt cavity receivers with different structures," Applied Energy, Elsevier, vol. 204(C), pages 966-978.
    9. Zhang, Yanping & Xiao, Hu & Zou, Chongzhe & Falcoz, Quentin & Neveu, Pierre, 2020. "Combined optics and heat transfer numerical model of a solar conical receiver with built-in helical pipe," Energy, Elsevier, vol. 193(C).
    10. Rajan, Abhinav & Reddy, K.S., 2023. "Integrated optical and thermal model to investigate the performance of a solar parabolic dish collector coupled with a cavity receiver," Renewable Energy, Elsevier, vol. 219(P1).
    11. Aichmayer, Lukas & Garrido, Jorge & Wang, Wujun & Laumert, Björn, 2018. "Experimental evaluation of a novel solar receiver for a micro gas-turbine based solar dish system in the KTH high-flux solar simulator," Energy, Elsevier, vol. 159(C), pages 184-195.
    12. Pratik, Nahyan Ahnaf & Ali, Md. Hasan & Lubaba, Nafisa & Hasan, Nahid & Asaduzzaman, Md. & Miyara, Akio, 2024. "Numerical investigation to optimize the modified cavity receiver for enhancement of thermal performance of solar parabolic dish collector system," Energy, Elsevier, vol. 290(C).
    13. Liang, Qi & He, Ya-Ling & Ren, Qinlong & Zhou, Yi-Peng & Xie, Tao, 2018. "A detailed study on phonon transport in thin silicon membranes with phononic crystal nanostructures," Applied Energy, Elsevier, vol. 227(C), pages 731-741.
    14. Qiu, Yu & He, Ya-Ling & Li, Peiwen & Du, Bao-Cun, 2017. "A comprehensive model for analysis of real-time optical performance of a solar power tower with a multi-tube cavity receiver," Applied Energy, Elsevier, vol. 185(P1), pages 589-603.
    15. Indora, Sunil & Kandpal, Tara C., 2018. "Institutional cooking with solar energy: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 84(C), pages 131-154.
    16. Aichmayer, Lukas & Garrido, Jorge & Laumert, Björn, 2020. "Thermo-mechanical solar receiver design and validation for a micro gas-turbine based solar dish system," Energy, Elsevier, vol. 196(C).
    17. Yuan, Yu & Wu, Gang & Yang, Qichang & Cheng, Ruifeng & Tong, Yuxin & Zhang, Yi & Fang, Hui & Ma, Qianlei, 2021. "Experimental and analytical optical-thermal performance of evacuated cylindrical tube receiver for solar dish collector," Energy, Elsevier, vol. 234(C).
    18. Yan, Jian & Peng, You-duo & Cheng, Zi-ran, 2018. "Optimization of a discrete dish concentrator for uniform flux distribution on the cavity receiver of solar concentrator system," Renewable Energy, Elsevier, vol. 129(PA), pages 431-445.
    19. Tang, Xin-Yuan & Zhang, Kai-Ran & Yang, Wei-Wei & Dou, Pei-Yuan, 2023. "Integrated design of solar concentrator and thermochemical reactor guided by optimal solar radiation distribution," Energy, Elsevier, vol. 263(PB).
    20. Hai Wang & Yanxin Hu & Jinqing Peng & Mengjie Song & Haoteng Li, 2021. "Effects of Receiver Parameters on Solar Flux Distribution for Triangle Cavity Receiver in the Fixed Linear-Focus Fresnel Lens Solar Concentrator," Sustainability, MDPI, vol. 13(11), pages 1-21, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:242:y:2022:i:c:s0360544221031923. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.