IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v239y2022ipds0360544221025032.html
   My bibliography  Save this article

High-temperature and radiation-resistant spinel-type ferrite coating for thermo-optical conversion in radioisotope thermophotovoltaic generators

Author

Listed:
  • Wang, Hongyu
  • Xu, Zhiheng
  • Yuan, Zicheng
  • Liu, Kai
  • Meng, Caifeng
  • Tang, Xiaobin

Abstract

High-temperature radioisotope heat source surface coated with excellent performance of thermo-optical conversion coating can greatly improve thermophotovoltaic energy utilization. However, long-term high-temperature and radiation resistance of the thermo-optical conversion pose a great challenge. In this work, spinel-type ferrite thermo-optical conversion coating was proposed to improve the heat and irradiation stability and output power of a radioisotope thermophotovoltaic (RTPV) prototype. Under the continuous irradiation of 32.64 kGy for 24 h at 1400 K, the emissivity of the spinel-type ferrite thermo-optical conversion coating could maintain more than 90%. In addition, the surface morphology of the coating was changed under high temperature, which enhanced its surface emissivity. Spinel-type ferrite thermo-optical conversion coating was applied to the RTPV prototype, which achieved a maximum output power of 144.23 mW. Compared with the RTPV prototype without coating, the overall output increased to 181.51%. Spinel-type ferrite thermo-optical conversion coating showed great application potential in the fields of thermo-optical conversion and high-efficiency utilization of thermal energy.

Suggested Citation

  • Wang, Hongyu & Xu, Zhiheng & Yuan, Zicheng & Liu, Kai & Meng, Caifeng & Tang, Xiaobin, 2022. "High-temperature and radiation-resistant spinel-type ferrite coating for thermo-optical conversion in radioisotope thermophotovoltaic generators," Energy, Elsevier, vol. 239(PD).
    • Handle: RePEc:eee:energy:v:239:y:2022:i:pd:s0360544221025032
    DOI: 10.1016/j.energy.2021.122255
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221025032
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.122255?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wang, Xiawa & Liang, Renrong & Fisher, Peter & Chan, Walker & Xu, Jun, 2020. "Critical design features of thermal-based radioisotope generators: A review of the power solution for polar regions and space," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    2. Yuan, Zicheng & Tang, Xiaobin & Xu, Zhiheng & Li, Junqin & Chen, Wang & Liu, Kai & Liu, Yunpeng & Zhang, Zhengrong, 2018. "Screen-printed radial structure micro radioisotope thermoelectric generator," Applied Energy, Elsevier, vol. 225(C), pages 746-754.
    3. Liu, Kai & Tang, Xiaobin & Liu, Yunpeng & Xu, Zhiheng & Yuan, Zicheng & Zhang, Zhengrong, 2020. "Enhancing the performance of fully-scaled structure-adjustable 3D thermoelectric devices based on cold–press sintering and molding," Energy, Elsevier, vol. 206(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Hongyu & Xu, Zhiheng & Wang, Chen & Hou, Zongbin & Bian, Mingxin & Zhuang, Nailiang & Tao, Haijun & Wang, Yuqiao & Tang, Xiaobin, 2024. "Optimized design and application performance analysis of heat recovery hybrid system for radioisotope thermophotovoltaic based on thermoelectric heat dissipation," Applied Energy, Elsevier, vol. 355(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Hongyu & Xu, Zhiheng & Wang, Chen & Hou, Zongbin & Bian, Mingxin & Zhuang, Nailiang & Tao, Haijun & Wang, Yuqiao & Tang, Xiaobin, 2024. "Optimized design and application performance analysis of heat recovery hybrid system for radioisotope thermophotovoltaic based on thermoelectric heat dissipation," Applied Energy, Elsevier, vol. 355(C).
    2. Jang, Eunhwa & Banerjee, Priyanshu & Huang, Jiyuan & Madan, Deepa, 2021. "High performance scalable and cost-effective thermoelectric devices fabricated using energy efficient methods and naturally occuring materials," Applied Energy, Elsevier, vol. 294(C).
    3. Eunhwa Jang & Rohan B. Ambade & Priyanshu Banerjee & L. D. Timmie Topoleski & Deepa Madan, 2024. "Stencil-Printed Scalable Radial Thermoelectric Device Using Sustainable Manufacturing Methods," Sustainability, MDPI, vol. 16(9), pages 1-11, April.
    4. Yang, Huizhu & Li, Mingxuan & Wang, Zehui & Ren, Fengsheng & Yang, Yue & Ma, Bijian & Zhu, Yonggang, 2023. "Performance optimization for a novel two-stage thermoelectric generator with different PCMs embedding modes," Energy, Elsevier, vol. 281(C).
    5. Wang, Xiawa & Liang, Renrong & Fisher, Peter & Chan, Walker & Xu, Jun, 2020. "Critical design features of thermal-based radioisotope generators: A review of the power solution for polar regions and space," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    6. Xu, Zhiheng & Li, Junqin & Tang, Xiaobin & Liu, Yunpeng & Jiang, Tongxin & Yuan, Zicheng & Liu, Kai, 2020. "Electrodeposition preparation and optimization of fan-shaped miniaturized radioisotope thermoelectric generator," Energy, Elsevier, vol. 194(C).
    7. Borhani, S.M. & Hosseini, M.J. & Pakrouh, R. & Ranjbar, A.A. & Nourian, A., 2021. "Performance enhancement of a thermoelectric harvester with a PCM/Metal foam composite," Renewable Energy, Elsevier, vol. 168(C), pages 1122-1140.
    8. Zhao, Xiaohuan & Jiang, Jiang & Zuo, Hongyan & Mao, Zhengsong, 2023. "Performance analysis of diesel particulate filter thermoelectric conversion mobile energy storage system under engine conditions of low-speed and light-load," Energy, Elsevier, vol. 282(C).
    9. Matteo d’Angelo & Carmen Galassi & Nora Lecis, 2023. "Thermoelectric Materials and Applications: A Review," Energies, MDPI, vol. 16(17), pages 1-50, September.
    10. Jing, Hang & Xiang, Qingpei & Ze, Rende & Chen, Xiaoxi & Li, Jing & Liao, Jincheng & Bai, Shengqiang, 2023. "A skutterudite thermoelectric module with high aspect ratio applied to milliwatt radioisotope thermoelectric generator," Applied Energy, Elsevier, vol. 350(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:239:y:2022:i:pd:s0360544221025032. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.