IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v232y2021ics0360544221013153.html
   My bibliography  Save this article

Flame behaviour and flame location in large-eddy simulation of the turbulent premixed combustion

Author

Listed:
  • Alhumairi, Mohammed KH Abbas
  • Almahdawi, Yasseen A.
  • Nawi, Sami A.

Abstract

The lean premixed flame of a fuel mixture in a jet flow combustor was computationally investigated, and results were compared with experimental data at a constant thermal load of 9 kW and constant equivalence ratio of 0.588. Three variables, namely, the amplitude of pulsation, frequency (f), and the mass flow rate ratio (MFRR) of the inlet region, were considered to describe the turbulent effect and investigate the topology and location of the flame that represent the characteristics of sinusoidal wave inlet velocity. Results showed that flame topology strongly depended on varying the turbulence parameters examined, especially f and MFRR. The V-shaped flame with corrugated wings formed in the vicinity of the flame holder reflected the turbulence–combustion interaction in all test cases. The suggested large-eddy simulation (LES) model was suitable in predicting the flame location and flame topology associated with pulsating jet flow.

Suggested Citation

  • Alhumairi, Mohammed KH Abbas & Almahdawi, Yasseen A. & Nawi, Sami A., 2021. "Flame behaviour and flame location in large-eddy simulation of the turbulent premixed combustion," Energy, Elsevier, vol. 232(C).
    • Handle: RePEc:eee:energy:v:232:y:2021:i:c:s0360544221013153
    DOI: 10.1016/j.energy.2021.121067
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221013153
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.121067?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Nemitallah, Medhat A. & Kewlani, Gaurav & Hong, Seunghyuck & Shanbhogue, Santosh J. & Habib, Mohamed A. & Ghoniem, Ahmed F., 2016. "Investigation of a turbulent premixed combustion flame in a backward-facing step combustor; effect of equivalence ratio," Energy, Elsevier, vol. 95(C), pages 211-222.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Yuncong & Li, Ming & Jiang, Yan & Zhang, Chunwei & Chang, Wei & Shi, Yao, 2024. "Investigation of swirler effect on combustion and exergy efficiency of hydrogen/chlorine combustor based on entropy generation analysis," Energy, Elsevier, vol. 300(C).
    2. Yuan, Chenheng & Lu, Jiangchuan & Li, Shilei, 2023. "Thermoelectric coupling effect of secondary injection on gasoline fuel spray and mixing of a free vibration combustion alternator," Energy, Elsevier, vol. 281(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kwak, Sanghyeok & Choi, Jaehong & Lee, Min Chul & Yoon, Youngbin, 2021. "Predicting instability frequency and amplitude using artificial neural network in a partially premixed combustor," Energy, Elsevier, vol. 230(C).
    2. Wu, Gang & Jin, Xiao & Li, Qiangtian & Zhao, He & Ahmed, I.R. & Fu, Jianqin, 2016. "Experimental and numerical definition of the extreme heater locations in a closed-open standing wave thermoacoustic system," Applied Energy, Elsevier, vol. 182(C), pages 320-330.
    3. Zhuang Kang & Zhiwei Shi & Jiahao Ye & Xinghua Tian & Zhixin Huang & Hao Wang & Depeng Wei & Qingguo Peng & Yaojie Tu, 2023. "A Review of Micro Power System and Micro Combustion: Present Situation, Techniques and Prospects," Energies, MDPI, vol. 16(7), pages 1-28, April.
    4. Peng, Qingguo & Jiaqiang, E & Yang, W.M. & Xu, Hongpeng & Chen, Jingwei & Zhang, Feng & Meng, Tian & Qiu, Runzhi, 2019. "Experimental and numerical investigation of a micro-thermophotovoltaic system with different backward-facing steps and wall thicknesses," Energy, Elsevier, vol. 173(C), pages 540-547.
    5. Wan, Huaxian & Gao, Zihe & Ji, Jie & Zhang, Yongming & Li, Kaiyuan, 2018. "Experimental and theoretical study on flame front temperatures within ceiling jets from turbulent diffusion flames of n-heptane fuel," Energy, Elsevier, vol. 164(C), pages 79-86.
    6. Yilmaz, Harun & Cam, Omer & Yilmaz, Ilker, 2017. "Effect of micro combustor geometry on combustion and emission behavior of premixed hydrogen/air flames," Energy, Elsevier, vol. 135(C), pages 585-597.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:232:y:2021:i:c:s0360544221013153. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.