IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v300y2024ics0360544224013665.html
   My bibliography  Save this article

Investigation of swirler effect on combustion and exergy efficiency of hydrogen/chlorine combustor based on entropy generation analysis

Author

Listed:
  • Wang, Yuncong
  • Li, Ming
  • Jiang, Yan
  • Zhang, Chunwei
  • Chang, Wei
  • Shi, Yao

Abstract

Inefficient reagent reaction limits the development of compact combustion-based HCl synthesis production. To address this issue, a non-premixed HCl synthesis combustor that combines a swirler at the hydrogen channel with a porous nozzle at the chlorine channel is proposed. A three-dimensional non-premixed combustion model is used to investigate the effects of this combustor structure on the combustion efficiency, exergy efficiency, and pressure loss coefficient. The entropy generation analysis is employed to evaluate multiple irreversible losses for different structures and flow states. Through experimental validation and numerical simulation analysis, the effects of the swirler installation, inlet flow rate, and H2/Cl2 equivalence ratio on the combustion and heat transfer characteristics are investigated. The results demonstrate that the combustor with the swirler and porous nozzle improves exergy efficiency, leading to higher HCl purity and a reduced flame height for faster reactions under low-flow states. Chemical reactions contribute to over 96 % of entropy generation during combustion, with the swirler reducing total entropy by approximately 5 %. Optimal heat transfer effects and minimized entropy generation are achieved when the swirler is installed below the combustor spray hole. The installation of the swirler can increase the exergy efficiency of the H2/Cl2 combustor to approximately 43.73 %.

Suggested Citation

  • Wang, Yuncong & Li, Ming & Jiang, Yan & Zhang, Chunwei & Chang, Wei & Shi, Yao, 2024. "Investigation of swirler effect on combustion and exergy efficiency of hydrogen/chlorine combustor based on entropy generation analysis," Energy, Elsevier, vol. 300(C).
  • Handle: RePEc:eee:energy:v:300:y:2024:i:c:s0360544224013665
    DOI: 10.1016/j.energy.2024.131593
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224013665
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2024.131593?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Roy, Rishi & Gupta, Ashwani K., 2023. "Performance enhancement of swirl-assisted distributed combustion with hydrogen-enriched methane," Applied Energy, Elsevier, vol. 338(C).
    2. Zhao, He & Zhao, Dan & Becker, Sid & Rong, Hui & Zhao, Xiaohuan, 2023. "Entropy generation and improved thermal performance investigation on a hydrogen-fuelled double-channel microcombustor with Y-shaped internal fins," Energy, Elsevier, vol. 283(C).
    3. Mohammadi, Iman & Ajam, Hossein, 2019. "A theoretical study of entropy generation of the combustion phenomenon in the porous medium burner," Energy, Elsevier, vol. 188(C).
    4. Alhumairi, Mohammed KH Abbas & Almahdawi, Yasseen A. & Nawi, Sami A., 2021. "Flame behaviour and flame location in large-eddy simulation of the turbulent premixed combustion," Energy, Elsevier, vol. 232(C).
    5. Sun, Yuze & Rao, Zhuming & Zhao, Dan & Wang, Bing & Sun, Dakun & Sun, Xiaofeng, 2020. "Characterizing nonlinear dynamic features of self-sustained thermoacoustic oscillations in a premixed swirling combustor," Applied Energy, Elsevier, vol. 264(C).
    6. Li, Guoneng & Zhu, Zhihao & Zheng, Youqu & Guo, Wenwen & Tang, Yuanjun & Ye, Chao, 2023. "Experiments on a powerful, ultra-clean, and low-noise-level swirl-combustion-powered micro thermoelectric generator," Energy, Elsevier, vol. 263(PB).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. He, Ziqiang & You, Jingxiang & Kang, Dugang & Zou, Qunfeng & Zhang, Wenxiang & Zhang, Zhien, 2024. "Overall numerical simulation of chemical-thermal-electric conversion for an all-in-one thermoelectric generator based on micro scale combustion," Energy, Elsevier, vol. 292(C).
    2. Peng, Qingguo & Yang, Wenming & E, Jiaqiang & Li, Shaobo & Li, Zhenwei & Xu, Hongpeng & Fu, Guang, 2021. "Effects of propane addition and burner scale on the combustion characteristics and working performance," Applied Energy, Elsevier, vol. 285(C).
    3. Zuo, Wei & Li, Dexin & Li, Qingqing & Cheng, Qianju & Huang, Yuhan, 2024. "Effects of intermittent pulsating flow on the performance of multi-channel cold plate in electric vehicle lithium-ion battery pack," Energy, Elsevier, vol. 294(C).
    4. Jinshen Tong & Tao Cai, 2022. "Enhancing Thermal Performance, Exergy and Thermodynamics Efficiency of Premixed Methane/Air Micro-Planar Combustor in Micro-Thermophotovoltaic Systems," Energies, MDPI, vol. 16(1), pages 1-21, December.
    5. Xu, Wanrong & Kou, Chuanfu & E, Jiaqiang & Feng, Changling & Tan, Yan, 2024. "Effect analysis on the flow uniformity and pressure drop characteristics of the rotary diesel particulate filter for heavy-duty truck," Energy, Elsevier, vol. 288(C).
    6. Yuan, Chenheng & Lu, Jiangchuan & Li, Shilei, 2023. "Thermoelectric coupling effect of secondary injection on gasoline fuel spray and mixing of a free vibration combustion alternator," Energy, Elsevier, vol. 281(C).
    7. E, Shengxin & Cui, Yaxin & Liu, Yuxian & Yin, Huichun, 2023. "Effects of the different phase change materials on heat dissipation performances of the ternary polymer Li-ion battery pack in hot climate," Energy, Elsevier, vol. 282(C).
    8. E, Jiaqiang & Qin, Yisheng & Zhang, Bin & Yin, Huichun & Tan, Yan, 2023. "Effects of heating film and phase change material on preheating performance of the lithium-ion battery pack with large capacity under low temperature environment," Energy, Elsevier, vol. 284(C).
    9. Tan, Dongli & Li, Dongmei & Wang, Su & Zhang, Zhiqing & Tian, Jie & Li, Jiangtao & Lv, Junshuai & Zheng, Wenling & Ye, Yanshuai, 2023. "Evaluation and optimization of hydrogen addition on the performance and emission for biodiesel dual-fuel engines with different blend ratios based on the response surface method," Energy, Elsevier, vol. 283(C).
    10. Zhao, Yulong & Zhang, Guoyin & Wen, Lei & Wang, Shixue & Wang, Yulin & Li, Yanzhe & Ge, Minghui, 2024. "Experimental study on thermoelectric characteristics of intermediate fluid thermoelectric generator," Applied Energy, Elsevier, vol. 365(C).
    11. E, Shengxin & Liu, Yuxian & Cui, Yaxin & Wu, Aojin & Yin, Huichun, 2023. "Effects of composite cooling strategy including phase change material and cooling air on the heat dissipation performance improvement of lithium ion power batteries pack in hot climate and its catastr," Energy, Elsevier, vol. 283(C).
    12. Senda Agrebi & Louis Dreßler & Hendrik Nicolai & Florian Ries & Kaushal Nishad & Amsini Sadiki, 2021. "Analysis of Local Exergy Losses in Combustion Systems Using a Hybrid Filtered Eulerian Stochastic Field Coupled with Detailed Chemistry Tabulation: Cases of Flames D and E," Energies, MDPI, vol. 14(19), pages 1-21, October.
    13. Shen, Rong & Li, Guoneng & Zhu, Yiyuan & Tang, Yuanjun & Guo, Wenwen & Zheng, Youqu & Huang, Kenan, 2024. "Development of a compact high-performance combustion powered thermoelectric generator based on swirl burner," Energy, Elsevier, vol. 286(C).
    14. Zhang, Bin & Li, Xuewei & Tang, Shanhong & Wan, Qin & Jia, Guohai & Liu, Bo & Li, Shijun, 2023. "Effects analysis on hydrocarbon removal performance of an adsorptive catalytic gasoline particulate filter in the gasoline engine during cold start," Energy, Elsevier, vol. 283(C).
    15. Peng, Qingguo & Xie, Bo & Yang, Wenming & Tang, Shihao & Li, Zhenwei & Zhou, Peng & Luo, Ningkang, 2021. "Effects of porosity and multilayers of porous medium on the hydrogen-fueled combustion and micro-thermophotovoltaic," Renewable Energy, Elsevier, vol. 174(C), pages 391-402.
    16. Zuo, Hongyan & Liang, Jingwei & Zhang, Bin & Wei, Kexiang & Zhu, Hong & Tan, Jiqiu, 2023. "Intelligent estimation on state of health of lithium-ion power batteries based on failure feature extraction," Energy, Elsevier, vol. 282(C).
    17. Li, Guoneng & Zhu, Zhihao & Zheng, Youqu & Guo, Wenwen & Tang, Yuanjun & Ye, Chao, 2023. "Experiments on a powerful, ultra-clean, and low-noise-level swirl-combustion-powered micro thermoelectric generator," Energy, Elsevier, vol. 263(PB).
    18. Zuo, Wei & Li, Dexin & Li, Qingqing & Cheng, Qianju & Zhou, Kun & E, Jiaqiang, 2023. "Multi-objective optimization of multi-channel cold plate under intermittent pulsating flow by RSM and NSGA-Ⅱ for thermal management of electric vehicle lithium-ion battery pack," Energy, Elsevier, vol. 283(C).
    19. Zhao, Xiaohuan & Jiang, Jiang & Mao, Zhengsong, 2023. "Effect of filter material and porosity on the energy storage capacity characteristics of diesel particulate filter thermoelectric conversion mobile energy storage system," Energy, Elsevier, vol. 283(C).
    20. Chen, Geng & Tang, Lihua & Mace, Brian & Yu, Zhibin, 2021. "Multi-physics coupling in thermoacoustic devices: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 146(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:300:y:2024:i:c:s0360544224013665. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.