IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v215y2021ipas0360544220322209.html
   My bibliography  Save this article

A machine learning approach for modeling and optimization of a CO2 post-combustion capture unit

Author

Listed:
  • Shalaby, Abdelhamid
  • Elkamel, Ali
  • Douglas, Peter L.
  • Zhu, Qinqin
  • Zheng, Qipeng P.

Abstract

Reducing CO2 emissions from fossil fuel fired power plants has been a major environmental concern over the last decade. Amongst various carbon capture and storage (CCS) technologies, the utilization of solvent-based post-combustion capture (PCC), played a major role in the reduction of CO2 emissions. This paper illustrates the development of machine learning models to predict the outputs of the PCC unit. A fine tree, Matérn Gaussian process regression (GPR), rational quadratic GPR, and squared exponential GPR models were developed and compared with a feed-forward artificial neural network (ANN) model. An accuracy of up to 98% in predicting the process outputs was achieved. Furthermore, the models were utilized to determine the optimum operating conditions for the process using a sequential quadratic programming algorithm (SQP) and genetic algorithm (GA). The use of the machine learning models has proven to be very useful since the complete mechanistic model is too large, and its runtime is too long to allow for rigorous optimal solutions. The machine learning models and optimization problems were developed and solved using MATLAB. The data used in this work was obtained from simulating the process using gPROMS process builder. The inputs of the model were selected to be reboiler duty, condenser duty, reboiler pressure, flow rate, temperature, and the pressure of the flue gas. The models were able to accurately predict the outputs of the process which are the system energy requirements (SER), capture rate (CR), and the purity of condenser outlet stream (PU).

Suggested Citation

  • Shalaby, Abdelhamid & Elkamel, Ali & Douglas, Peter L. & Zhu, Qinqin & Zheng, Qipeng P., 2021. "A machine learning approach for modeling and optimization of a CO2 post-combustion capture unit," Energy, Elsevier, vol. 215(PA).
    • Handle: RePEc:eee:energy:v:215:y:2021:i:pa:s0360544220322209
    DOI: 10.1016/j.energy.2020.119113
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220322209
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.119113?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sultan, G.I. & Hamed, Ahmed M. & Sultan, A.A., 2002. "The effect of inlet parameters on the performance of packed tower-regenerator," Renewable Energy, Elsevier, vol. 26(2), pages 271-283.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Aliyon, Kasra & Rajaee, Fatemeh & Ritvanen, Jouni, 2023. "Use of artificial intelligence in reducing energy costs of a post-combustion carbon capture plant," Energy, Elsevier, vol. 278(PA).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Shukla, Dhruvin L. & Modi, Kalpesh V., 2017. "A technical review on regeneration of liquid desiccant using solar energy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 517-529.
    2. Tu, Min & Huang, Hui & Liu, Ze-Hua & Chen, Huan-Xin & Ren, Cheng-Qin & Chen, Guo-Jie & Hu, Yan, 2017. "Factor analysis and optimization of operational parameters in a liquid desiccant air-conditioning system," Energy, Elsevier, vol. 139(C), pages 767-781.
    3. Song, Xia & Zhang, Lun & Zhang, Xiaosong, 2019. "Analysis of the temperatures of heating and cooling sources and the air states in liquid desiccant dehumidification systems regenerated by return air," Energy, Elsevier, vol. 168(C), pages 651-661.
    4. Giampieri, Alessandro & Ma, Zhiwei & Ling-Chin, Janie & Bao, Huashan & Smallbone, Andrew J. & Roskilly, Anthony Paul, 2022. "Liquid desiccant dehumidification and regeneration process: Advancing correlations for moisture and enthalpy effectiveness," Applied Energy, Elsevier, vol. 314(C).
    5. Hamed, Ahmed M., 2003. "Desorption characteristics of desiccant bed for solar dehumidification/humidification air conditioning systems," Renewable Energy, Elsevier, vol. 28(13), pages 2099-2111.
    6. Kumar, Ritunesh & Dhar, P.L. & Jain, Sanjeev, 2011. "Development of new wire mesh packings for improving the performance of zero carryover spray tower," Energy, Elsevier, vol. 36(2), pages 1362-1374.
    7. Hassan, H.Z. & Mohamad, A.A., 2012. "A review on solar cold production through absorption technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 5331-5348.
    8. Peng, Donggen & Luo, Danting, 2017. "Modeling and parametrical analysis on internally-heated liquid desiccant regenerator in liquid desiccant air conditioning," Energy, Elsevier, vol. 141(C), pages 461-471.
    9. Kabeel, A.E., 2010. "Dehumidification and humidification process of desiccant solution by air injection," Energy, Elsevier, vol. 35(12), pages 5192-5201.
    10. Enteria, Napoleon & Yoshino, Hiroshi & Mochida, Akashi, 2013. "Review of the advances in open-cycle absorption air-conditioning systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 265-289.
    11. Wang, Xinli & Cai, Wenjian & Lu, Jiangang & Sun, Youxian & Ding, Xudong, 2013. "A hybrid dehumidifier model for real-time performance monitoring, control and optimization in liquid desiccant dehumidification system," Applied Energy, Elsevier, vol. 111(C), pages 449-455.
    12. Liu, X.H. & Jiang, Y. & Chang, X.M. & Yi, X.Q., 2007. "Experimental investigation of the heat and mass transfer between air and liquid desiccant in a cross-flow regenerator," Renewable Energy, Elsevier, vol. 32(10), pages 1623-1636.
    13. Enteria, Napoleon & Mizutani, Kunio, 2011. "The role of the thermally activated desiccant cooling technologies in the issue of energy and environment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(4), pages 2095-2122, May.
    14. Soo-Jin Lee & Hansol Lim & Jae-Weon Jeong, 2021. "Energy Benefit of Liquid Desiccant-Assisted Humidification in Buildings during Winter Operation," Energies, MDPI, vol. 14(5), pages 1-24, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:215:y:2021:i:pa:s0360544220322209. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.