IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v202y2020ics0360544220307982.html
   My bibliography  Save this article

Thermodynamic analysis and design optimisation of a cross flow air to air membrane enthalpy exchanger

Author

Listed:
  • Albdoor, Ahmed K.
  • Ma, Zhenjun
  • Cooper, Paul
  • Ren, Haoshan
  • Al-Ghazzawi, Fatimah

Abstract

This paper presents a thermodynamic analysis and design optimisation of a cross flow air to air membrane enthalpy exchanger (MEE). The entropy generation rate for simultaneous heat and moisture transfer was first derived based on the second law of thermodynamics and the NTU-effectiveness method. Two potential objective functions based on the dimensionless entropy generation rates were used in this study. A parametric analysis was carried out to explore the effects of the effectiveness and operating conditions on the dimensionless entropy generation rates of the MEE and identify the appropriate objective function to be used in the optimisation. Global sensitivity analysis and a genetic algorithm were used to determine the key design parameters and obtain their optimal values, respectively. An illustrative example was lastly used to demonstrate the benefit of the optimisation. It was found that the operating conditions showed significant impacts on the entropy generation rates inside MEEs. Using the optimal values identified can reduce the entropy generation by 19.8% and 29.7% for the cooling and heating modes respectively, as compared to a baseline design. The findings obtained can be used to generate a deep understanding of the relationship between entropy generation rate and the operating conditions/design parameters of MEEs.

Suggested Citation

  • Albdoor, Ahmed K. & Ma, Zhenjun & Cooper, Paul & Ren, Haoshan & Al-Ghazzawi, Fatimah, 2020. "Thermodynamic analysis and design optimisation of a cross flow air to air membrane enthalpy exchanger," Energy, Elsevier, vol. 202(C).
    • Handle: RePEc:eee:energy:v:202:y:2020:i:c:s0360544220307982
    DOI: 10.1016/j.energy.2020.117691
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220307982
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.117691?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Xiao, Liehui & Yang, Minlin & Zhao, Shuaifei & Yuan, Wu-Zhi & Huang, Si-Min, 2019. "Entropy generation analysis of heat and water recovery from flue gas by transport membrane condenser," Energy, Elsevier, vol. 174(C), pages 835-847.
    2. Zhang, L.Z & Niu, J.L, 2001. "Energy requirements for conditioning fresh air and the long-term savings with a membrane-based energy recovery ventilator in Hong Kong," Energy, Elsevier, vol. 26(2), pages 119-135.
    3. Mardiana-Idayu, A. & Riffat, S.B., 2012. "Review on heat recovery technologies for building applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(2), pages 1241-1255.
    4. Zhang, Li-Zhi, 2016. "A reliability-based optimization of membrane-type total heat exchangers under uncertain design parameters," Energy, Elsevier, vol. 101(C), pages 390-401.
    5. Zhang, Yinping & Jiang, Yi & Zhang, Li Zhi & Deng, Yuchun & Jin, Zhaofen, 2000. "Analysis of thermal performance and energy savings of membrane based heat recovery ventilator," Energy, Elsevier, vol. 25(6), pages 515-527.
    6. Duan, Zhiyin & Zhan, Changhong & Zhang, Xingxing & Mustafa, Mahmud & Zhao, Xudong & Alimohammadisagvand, Behrang & Hasan, Ala, 2012. "Indirect evaporative cooling: Past, present and future potentials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(9), pages 6823-6850.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Albdoor, A.K. & Ma, Z. & Al-Ghazzawi, F. & Arıcı, M., 2022. "Study on recent progress and advances in air-to-air membrane enthalpy exchangers: Materials selection, performance improvement, design optimisation and effects of operating conditions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    2. Chong Zhang & Jinbo Wang & Liao Li & Feifei Wang & Wenjie Gang, 2020. "Utilization of Earth-to-Air Heat Exchanger to Pre-Cool/Heat Ventilation Air and Its Annual Energy Performance Evaluation: A Case Study," Sustainability, MDPI, vol. 12(20), pages 1-17, October.
    3. Li, Hao & Zhang, Tao & Zhang, Ji & Guan, Bowen & Liu, Xiaohua & Nakazawa, Takema & Fang, Lin & Tanaka, Toshio, 2023. "Investigation of energy recovery performance and frost risk of membrane enthalpy exchanger applied in cold climates," Energy, Elsevier, vol. 282(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Abdel-Salam, Mohamed R.H. & Ge, Gaoming & Fauchoux, Melanie & Besant, Robert W. & Simonson, Carey J., 2014. "State-of-the-art in liquid-to-air membrane energy exchangers (LAMEEs): A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 39(C), pages 700-728.
    2. Liu, Di & Zhao, Fu-Yun & Tang, Guang-Fa, 2010. "Active low-grade energy recovery potential for building energy conservation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(9), pages 2736-2747, December.
    3. Ewa Zender–Świercz, 2021. "A Review of Heat Recovery in Ventilation," Energies, MDPI, vol. 14(6), pages 1-23, March.
    4. Liu, X.P. & Niu, J.L., 2014. "An optimal design analysis method for heat recovery devices in building applications," Applied Energy, Elsevier, vol. 129(C), pages 364-372.
    5. Albdoor, A.K. & Ma, Z. & Al-Ghazzawi, F. & Arıcı, M., 2022. "Study on recent progress and advances in air-to-air membrane enthalpy exchangers: Materials selection, performance improvement, design optimisation and effects of operating conditions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    6. Gao, D.C. & Sun, Y.J. & Ma, Z. & Ren, H., 2021. "A review on integration and design of desiccant air-conditioning systems for overall performance improvements," Renewable and Sustainable Energy Reviews, Elsevier, vol. 141(C).
    7. Oliveira, Cíntia Carla Melgaço de & Brittes, José Luiz Pereira & Silveira Junior, Vivaldo, 2019. "Dynamic operating conditions strategy for water hybrid cooling under variable heating demand," Applied Energy, Elsevier, vol. 237(C), pages 635-645.
    8. Xia, Guanghui & Zhuang, Dawei & Ding, Guoliang & Lu, Jingchao, 2020. "A quasi-three-dimensional distributed parameter model of micro-channel separated heat pipe applied for cooling telecommunication cabinets," Applied Energy, Elsevier, vol. 276(C).
    9. Cui, X. & Islam, M.R. & Mohan, B. & Chua, K.J., 2016. "Theoretical analysis of a liquid desiccant based indirect evaporative cooling system," Energy, Elsevier, vol. 95(C), pages 303-312.
    10. Utlu, Zafer, 2015. "Investigation of the potential for heat recovery at low, medium, and high stages in the Turkish industrial sector (TIS): An application," Energy, Elsevier, vol. 81(C), pages 394-405.
    11. Hwang, Won-Baek & Choi, Sun & Lee, Dae-Young, 2017. "In-depth analysis of the performance of hybrid desiccant cooling system incorporated with an electric heat pump," Energy, Elsevier, vol. 118(C), pages 324-332.
    12. Park, Joon-Young & Kim, Beom-Jun & Yoon, Soo-Yeol & Byon, Yoo-Suk & Jeong, Jae-Weon, 2019. "Experimental analysis of dehumidification performance of an evaporative cooling-assisted internally cooled liquid desiccant dehumidifier," Applied Energy, Elsevier, vol. 235(C), pages 177-185.
    13. Kim, Joseph J., 2017. "Economic analysis on energy saving technologies for complex manufacturing building," Resources, Conservation & Recycling, Elsevier, vol. 123(C), pages 249-254.
    14. Ham, Sang-Woo & Jeong, Jae-Weon, 2016. "DPHX (dew point evaporative heat exchanger): System design and performance analysis," Energy, Elsevier, vol. 101(C), pages 132-145.
    15. Mahmood, Muhammad H. & Sultan, Muhammad & Miyazaki, Takahiko & Koyama, Shigeru & Maisotsenko, Valeriy S., 2016. "Overview of the Maisotsenko cycle – A way towards dew point evaporative cooling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 66(C), pages 537-555.
    16. Rafael Herrera-Limones & Ángel Luis León-Rodríguez & Álvaro López-Escamilla, 2019. "Solar Decathlon Latin America and Caribbean: Comfort and the Balance between Passive and Active Design," Sustainability, MDPI, vol. 11(13), pages 1-17, June.
    17. Li, Wuyan & Li, Xianting & Gao, Yijun & Shi, Wenxing, 2022. "Thermo-economic evaluation for energy retrofitting building ventilation system based on run-around heat recovery system," Energy, Elsevier, vol. 260(C).
    18. Demis Pandelidis & Sergey Anisimov & Paweł Drąg, 2017. "Performance Comparison between Selected Evaporative Air Coolers," Energies, MDPI, vol. 10(4), pages 1-20, April.
    19. Akhlaghi, Yousef Golizadeh & Ma, Xiaoli & Zhao, Xudong & Shittu, Samson & Li, Junming, 2019. "A statistical model for dew point air cooler based on the multiple polynomial regression approach," Energy, Elsevier, vol. 181(C), pages 868-881.
    20. Oh, Seung Jin & Shahzad, Muhammad Wakil & Burhan, Muhammad & Chun, Wongee & Kian Jon, Chua & KumJa, M. & Ng, Kim Choon, 2019. "Approaches to energy efficiency in air conditioning: A comparative study on purge configurations for indirect evaporative cooling," Energy, Elsevier, vol. 168(C), pages 505-515.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:202:y:2020:i:c:s0360544220307982. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.