IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v165y2018ipap639-665.html
   My bibliography  Save this article

Thermal hybrid power systems using multiple heat sources of different temperature: Thermodynamic analysis for Brayton cycles

Author

Listed:
  • Yue, Ting
  • Lior, Noam

Abstract

Past studies on hybrid power cycles using multiple heat sources of different temperatures focused mainly on case studies and almost no general theory about this type of systems was developed. This paper is a study of their general thermodynamic performance, with comparison to their corresponding single temperature heat source reference system, focusing on the Brayton cycles: simple Brayton cycle, and Brayton cycle with intercooling, reheat and heat regeneration. The generalized expressions for the energy and exergy efficiency difference between the hybrid and the corresponding single heat source reference systems were developed, which allow easy determination of the extent of relative desirability of the hybrid systems in that respect. The design and operating conditions under which the hybrid systems become more efficient than the non-hybrid reference ones were found. A number of case studies were simulated (after validation) to help basic understanding and confirm the thermodynamic generalization of the results. One of the results showed that the largest exergy destruction occurs in the combustors (67% to total exergy destruction) and can be reduced by using additional heat sources (AHS) that are of lower temperature difference between the heating and heated streams, and/or renewable energy. The sensitivity analysis results further suggested that efforts should be made to increase the energy conversion efficiency of the AHS. The effects of AHS input and temperature on energy efficiency, fuel depletion and emissions were studied and compared with the conventional Brayton cycles. It was found that addition of the AHS, i.e. cycle hybridization, reduces emissions and fuel depletion and thus has an advantage over conventional non-hybrid Brayton cycles. A thermodynamic foundation of such hybrid systems was laid, and some easy guidance was provided for use in their preliminary design, before their highly time-consuming and expensive detailed analysis, simulation, and experiments.

Suggested Citation

  • Yue, Ting & Lior, Noam, 2018. "Thermal hybrid power systems using multiple heat sources of different temperature: Thermodynamic analysis for Brayton cycles," Energy, Elsevier, vol. 165(PA), pages 639-665.
    • Handle: RePEc:eee:energy:v:165:y:2018:i:pa:p:639-665
    DOI: 10.1016/j.energy.2018.09.099
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218318632
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2018.09.099?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Gou, Chenhua & Cai, Ruixian & Hong, Hui, 2007. "A novel hybrid oxy-fuel power cycle utilizing solar thermal energy," Energy, Elsevier, vol. 32(9), pages 1707-1714.
    2. Pak, Pyong Sik & Suzuki, Yutaka & Kosugi, Takanobu, 1997. "A CO2-capturing hybrid power-generation system with highly efficient use of solar thermal energy," Energy, Elsevier, vol. 22(2), pages 295-299.
    3. Yue, Ting & Lior, Noam, 2017. "Exergo economic analysis of solar-assisted hybrid power generation systems integrated with thermochemical fuel conversion," Applied Energy, Elsevier, vol. 191(C), pages 204-222.
    4. Yue, Ting & Lior, Noam, 2018. "Thermodynamic analysis of hybrid Rankine cycles using multiple heat sources of different temperatures," Applied Energy, Elsevier, vol. 222(C), pages 564-583.
    5. Baghernejad, A. & Yaghoubi, M., 2010. "Exergy analysis of an integrated solar combined cycle system," Renewable Energy, Elsevier, vol. 35(10), pages 2157-2164.
    6. Bernardos, Eva & López, Ignacio & Rodríguez, Javier & Abánades, Alberto, 2013. "Assessing the potential of hybrid fossil–solar thermal plants for energy policy making: Brayton cycles," Energy Policy, Elsevier, vol. 62(C), pages 99-106.
    7. Yue, Ting & Lior, Noam, 2017. "Exergo-economic competitiveness criteria for hybrid power cycles using multiple heat sources of different temperatures," Energy, Elsevier, vol. 135(C), pages 943-961.
    8. Yue, Ting & Lior, Noam, 2017. "Thermodynamic analysis of solar-assisted hybrid power generation systems integrated with thermochemical fuel conversion," Energy, Elsevier, vol. 118(C), pages 671-683.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liu, Yaping & Wang, Ying & Huang, Diangui, 2019. "Supercritical CO2 Brayton cycle: A state-of-the-art review," Energy, Elsevier, vol. 189(C).
    2. Faustino Moreno-Gamboa & Ana Escudero-Atehortua & César Nieto-Londoño, 2022. "Alternatives to Improve Performance and Operation of a Hybrid Solar Thermal Power Plant Using Hybrid Closed Brayton Cycle," Sustainability, MDPI, vol. 14(15), pages 1-24, August.
    3. Wang, Jiangjiang & Chen, Yuzhu & Lior, Noam & Li, Weihua, 2019. "Energy, exergy and environmental analysis of a hybrid combined cooling heating and power system integrated with compound parabolic concentrated-photovoltaic thermal solar collectors," Energy, Elsevier, vol. 185(C), pages 463-476.
    4. Wang, Jiangjiang & Lu, Zherui & Li, Meng & Lior, Noam & Li, Weihua, 2019. "Energy, exergy, exergoeconomic and environmental (4E) analysis of a distributed generation solar-assisted CCHP (combined cooling, heating and power) gas turbine system," Energy, Elsevier, vol. 175(C), pages 1246-1258.
    5. Zhang, Lianjie & Deng, Tianrui & Klemeš, Jiří Jaromír & Zeng, Min & Ma, Ting & Wang, Qiuwang, 2021. "Supercritical CO2 Brayton cycle at different heat source temperatures and its analysis under leakage and disturbance conditions," Energy, Elsevier, vol. 237(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Jiangjiang & Lu, Zherui & Li, Meng & Lior, Noam & Li, Weihua, 2019. "Energy, exergy, exergoeconomic and environmental (4E) analysis of a distributed generation solar-assisted CCHP (combined cooling, heating and power) gas turbine system," Energy, Elsevier, vol. 175(C), pages 1246-1258.
    2. Yue, Ting & Lior, Noam, 2018. "Thermodynamic analysis of hybrid Rankine cycles using multiple heat sources of different temperatures," Applied Energy, Elsevier, vol. 222(C), pages 564-583.
    3. Gunasekaran, S. & Mancini, N.D. & El-Khaja, R. & Sheu, E.J. & Mitsos, A., 2014. "Solar–thermal hybridization of advanced zero emissions power cycle," Energy, Elsevier, vol. 65(C), pages 152-165.
    4. Jin Wu & Jiangjiang Wang & Jing Wu & Chaofan Ma, 2019. "Exergy and Exergoeconomic Analysis of a Combined Cooling, Heating, and Power System Based on Solar Thermal Biomass Gasification," Energies, MDPI, vol. 12(12), pages 1-19, June.
    5. Wang, Jiangjiang & Chen, Yuzhu & Lior, Noam & Li, Weihua, 2019. "Energy, exergy and environmental analysis of a hybrid combined cooling heating and power system integrated with compound parabolic concentrated-photovoltaic thermal solar collectors," Energy, Elsevier, vol. 185(C), pages 463-476.
    6. Jamel, M.S. & Abd Rahman, A. & Shamsuddin, A.H., 2013. "Advances in the integration of solar thermal energy with conventional and non-conventional power plants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 20(C), pages 71-81.
    7. Ma, Sainan & Chiu, Chun Pang & Zhu, Yujiao & Tang, Chun Yin & Long, Hui & Qarony, Wayesh & Zhao, Xinhua & Zhang, Xuming & Lo, Wai Hung & Tsang, Yuen Hong, 2017. "Recycled waste black polyurethane sponges for solar vapor generation and distillation," Applied Energy, Elsevier, vol. 206(C), pages 63-69.
    8. Zhai, Chong & Wu, Wei, 2022. "Energetic, exergetic, economic, and environmental analysis of microchannel membrane-based absorption refrigeration system driven by various energy sources," Energy, Elsevier, vol. 239(PB).
    9. Liu, Taixiu & Bai, Zhang & Zheng, Zhimei & Liu, Qibin & Lei, Jing & Sui, Jun & Jin, Hongguang, 2019. "100 kWe power generation pilot plant with a solar thermochemical process: design, modeling, construction, and testing," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    10. Yang, Kun & Wang, Jiangjiang & Jiang, Haowen, 2024. "A novel exergy-based cost and carbon footprint allocation method in the multi-energy complementary system," Renewable Energy, Elsevier, vol. 231(C).
    11. Bai, Zhang & Liu, Qibin & Lei, Jing & Jin, Hongguang, 2018. "Investigation on the mid-temperature solar thermochemical power generation system with methanol decomposition," Applied Energy, Elsevier, vol. 217(C), pages 56-65.
    12. Okoroigwe, Edmund & Madhlopa, Amos, 2016. "An integrated combined cycle system driven by a solar tower: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 337-350.
    13. Beretta, Gian Paolo & Iora, Paolo & Ghoniem, Ahmed F., 2014. "Allocating resources and products in multi-hybrid multi-cogeneration: What fractions of heat and power are renewable in hybrid fossil-solar CHP?," Energy, Elsevier, vol. 78(C), pages 587-603.
    14. Rovira, Antonio & Abbas, Rubén & Sánchez, Consuelo & Muñoz, Marta, 2020. "Proposal and analysis of an integrated solar combined cycle with partial recuperation," Energy, Elsevier, vol. 198(C).
    15. Anvari, Simin & Mahian, Omid & Taghavifar, Hadi & Wongwises, Somchai & Desideri, Umberto, 2020. "4E analysis of a modified multigeneration system designed for power, heating/cooling, and water desalination," Applied Energy, Elsevier, vol. 270(C).
    16. Wang, Ruilin & Qu, Wanjun & Hong, Hui & Sun, Jie & Jin, Hongguang, 2018. "Experimental performance of 300 kWth prototype of parabolic trough collector with rotatable axis and irreversibility analysis," Energy, Elsevier, vol. 161(C), pages 595-609.
    17. Popov, Dimityr & Borissova, Ana, 2017. "Innovative configuration of a hybrid nuclear-solar tower power plant," Energy, Elsevier, vol. 125(C), pages 736-746.
    18. Bernardos, Eva & López, Ignacio & Rodríguez, Javier & Abánades, Alberto, 2013. "Assessing the potential of hybrid fossil–solar thermal plants for energy policy making: Brayton cycles," Energy Policy, Elsevier, vol. 62(C), pages 99-106.
    19. Zolfaghari, Seyed Mohammad & Soltani, M. & Hosseinpour, Morteza & Nathwani, Jatin, 2023. "Comprehensive analysis of geothermal energy integration with heavy oil upgrading in hot compressed water," Applied Energy, Elsevier, vol. 345(C).
    20. Li, Yuqiang & Liu, Gang & Liu, Xianping & Liao, Shengming, 2016. "Thermodynamic multi-objective optimization of a solar-dish Brayton system based on maximum power output, thermal efficiency and ecological performance," Renewable Energy, Elsevier, vol. 95(C), pages 465-473.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:165:y:2018:i:pa:p:639-665. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.