IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v151y2018icp467-477.html
   My bibliography  Save this article

Optimization of well spacing to achieve a stable combustion during the THAI process

Author

Listed:
  • Zhao, Renbao
  • Yu, Shuai
  • Yang, Jie
  • Heng, Minghao
  • Zhang, Chunhui
  • Wu, Yahong
  • Zhang, Jianhua
  • Yue, Xiang-an

Abstract

Toe-to-Heel Air Injection (THAI) is a great potential in improving energy efficiency for heavy oil/bitumen recovery. A 3D cylindrical combustion model with large size is used to carry out several experiments using Xinjiang (China) crude oil. The evolution of the fire chamber, temperature variation rate, and mass of burned carbon were analyzed using temperature measurements and flue gas composition analysis. Coke zone was quantified in the variation of zone thickness and distribution characteristics. The results reveal that there is a prevailing stable propagation of the combustion front during the first one third of the process for varying injector to producer spacing. Oxygen breakthrough is more susceptible for smaller separations and the combustion zone is reduced in length. Larger combustion fronts with greater relative propagation in the horizontal direction occurs when the well spacing is larger. The distribution of coke is significantly influenced by the injector/producer spacing. For a THAI pattern with greater injector/producer spacing, a smaller inclination angle of the coke zone occurs and the likelihood of oxygen breakthrough to the horizontal production well is lessened. Hence, the injector to producer spacing needs to be considered in designing a safe THAI process for potentially larger efficiency and optimum economics.

Suggested Citation

  • Zhao, Renbao & Yu, Shuai & Yang, Jie & Heng, Minghao & Zhang, Chunhui & Wu, Yahong & Zhang, Jianhua & Yue, Xiang-an, 2018. "Optimization of well spacing to achieve a stable combustion during the THAI process," Energy, Elsevier, vol. 151(C), pages 467-477.
    • Handle: RePEc:eee:energy:v:151:y:2018:i:c:p:467-477
    DOI: 10.1016/j.energy.2018.03.044
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218304468
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2018.03.044?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Giacchetta, Giancarlo & Leporini, Mariella & Marchetti, Barbara, 2015. "Economic and environmental analysis of a Steam Assisted Gravity Drainage (SAGD) facility for oil recovery from Canadian oil sands," Applied Energy, Elsevier, vol. 142(C), pages 1-9.
    2. Kapadia, Punitkumar R. & Wang, Jingyi (Jacky) & Kallos, Michael S. & Gates, Ian D., 2013. "Practical process design for in situ gasification of bitumen," Applied Energy, Elsevier, vol. 107(C), pages 281-296.
    3. Pang, Zhan-xi & Wu, Zheng-bin & Zhao, Meng, 2017. "A novel method to calculate consumption of non-condensate gas during steam assistant gravity drainage in heavy oil reservoirs," Energy, Elsevier, vol. 130(C), pages 76-85.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Cheng, Linsong & Liu, Hao & Huang, Shijun & Wu, Keliu & Chen, Xiao & Wang, Daigang & Xiong, Hao, 2018. "Environmental and economic benefits of Solvent-Assisted Steam-Gravity Drainage for bitumen through horizontal well: A comprehensive modeling analysis," Energy, Elsevier, vol. 164(C), pages 418-431.
    2. Yan, Yunfei & Wu, Gange & Huang, Weipeng & Zhang, Li & Li, Lixian & Yang, Zhongqing, 2019. "Numerical comparison study of methane catalytic combustion characteristic between newly proposed opposed counter-flow micro-combustor and the conventional ones," Energy, Elsevier, vol. 170(C), pages 403-410.
    3. Zhao, Shuai & Pu, Wanfen & Jiang, Qi & Yuan, Chengdong & Varfolomeev, Mikhail A. & Sudakov, Vladislav, 2023. "Investigation into the key factors influencing the establishment and propagation of combustion front in ultra-deep high-temperature heavy oil reservoirs," Energy, Elsevier, vol. 283(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Jing & Zhang, Lisong & Yang, Feiyue & Sun, Luning, 2020. "Positive measure and potential implication for heavy oil recovery of dip reservoir using SAGD based on numerical analysis," Energy, Elsevier, vol. 193(C).
    2. Zhang, Lisong & Li, Jing & Sun, Luning & Yang, Feiyue, 2021. "An influence mechanism of shale barrier on heavy oil recovery using SAGD based on theoretical and numerical analysis," Energy, Elsevier, vol. 216(C).
    3. Sapkota, Krishna & Oni, Abayomi Olufemi & Kumar, Amit & Linwei, Ma, 2018. "The development of a techno-economic model for the extraction, transportation, upgrading, and shipping of Canadian oil sands products to the Asia-Pacific region," Applied Energy, Elsevier, vol. 223(C), pages 273-292.
    4. Dong, Xiaohu & Liu, Huiqing & Chen, Zhangxin & Wu, Keliu & Lu, Ning & Zhang, Qichen, 2019. "Enhanced oil recovery techniques for heavy oil and oilsands reservoirs after steam injection," Applied Energy, Elsevier, vol. 239(C), pages 1190-1211.
    5. Liu, Hao & Cheng, Linsong & Wu, Keliu & Huang, Shijun & Maini, Brij B., 2018. "Assessment of energy efficiency and solvent retention inside steam chamber of steam- and solvent-assisted gravity drainage process," Applied Energy, Elsevier, vol. 226(C), pages 287-299.
    6. Baghernezhad, Danial & Siavashi, Majid & Nakhaee, Ali, 2019. "Optimal scenario design of steam-assisted gravity drainage to enhance oil recovery with temperature and rate control," Energy, Elsevier, vol. 166(C), pages 610-623.
    7. Lazzaroni, Edoardo Filippo & Elsholkami, Mohamed & Arbiv, Itai & Martelli, Emanuele & Elkamel, Ali & Fowler, Michael, 2016. "Energy infrastructure modeling for the oil sands industry: Current situation," Applied Energy, Elsevier, vol. 181(C), pages 435-445.
    8. Cheng, Linsong & Liu, Hao & Huang, Shijun & Wu, Keliu & Chen, Xiao & Wang, Daigang & Xiong, Hao, 2018. "Environmental and economic benefits of Solvent-Assisted Steam-Gravity Drainage for bitumen through horizontal well: A comprehensive modeling analysis," Energy, Elsevier, vol. 164(C), pages 418-431.
    9. Juan D. Antolinez & Rahman Miri & Alireza Nouri, 2023. "In Situ Combustion: A Comprehensive Review of the Current State of Knowledge," Energies, MDPI, vol. 16(17), pages 1-27, August.
    10. Diego Manfre Jaimes & Ian D. Gates & Matthew Clarke, 2019. "Reducing the Energy and Steam Consumption of SAGD Through Cyclic Solvent Co-Injection," Energies, MDPI, vol. 12(20), pages 1-28, October.
    11. Rui, Zhenhua & Wang, Xiaoqing & Zhang, Zhien & Lu, Jun & Chen, Gang & Zhou, Xiyu & Patil, Shirish, 2018. "A realistic and integrated model for evaluating oil sands development with Steam Assisted Gravity Drainage technology in Canada," Applied Energy, Elsevier, vol. 213(C), pages 76-91.
    12. Mikhail Turbakov & Аleksandr Shcherbakov, 2015. "Determination of Enhanced Oil Recovery Candidate Fields in the Volga-Ural Oil and Gas Region Territory," Energies, MDPI, vol. 8(10), pages 1-14, October.
    13. Hongtao Liu & Feng Chen & Yuanyuan Wang & Gang Liu & Hong Yao & Shuqin Liu, 2018. "Experimental Study of Reverse Underground Coal Gasification," Energies, MDPI, vol. 11(11), pages 1-13, October.
    14. Mir, Hamed & Siavashi, Majid, 2022. "Whole-time scenario optimization of steam-assisted gravity drainage (SAGD) with temperature, pressure, and rate control using an efficient hybrid optimization technique," Energy, Elsevier, vol. 239(PC).
    15. Leporini, Mariella & Marchetti, Barbara & Corvaro, Francesco & Polonara, Fabio, 2019. "Reconversion of offshore oil and gas platforms into renewable energy sites production: Assessment of different scenarios," Renewable Energy, Elsevier, vol. 135(C), pages 1121-1132.
    16. Ahmadi, Mohammadali & Hou, Qingfeng & Wang, Yuanyuan & Lei, Xuantong & Liu, Benjieming & Chen, Zhangxin, 2023. "Spotlight on reversible emulsification and demulsification of tetradecane-water mixtures using CO2/N2 switchable surfactants: Molecular dynamics (MD) simulation," Energy, Elsevier, vol. 279(C).
    17. Jinze Xu & Zhangxin Chen & Xiaohu Dong & Wei Zhou, 2017. "Effects of Lean Zones on Steam-Assisted Gravity Drainage Performance," Energies, MDPI, vol. 10(4), pages 1-16, April.
    18. Zhang, Qian & Li, Qingfeng & Zhang, Linxian & Wang, Zhiqing & Jing, Xuliang & Yu, Zhongliang & Song, Shuangshuang & Fang, Yitian, 2014. "Preliminary study on co-gasification behavior of deoiled asphalt with coal and biomass," Applied Energy, Elsevier, vol. 132(C), pages 426-434.
    19. Nimana, Balwinder & Canter, Christina & Kumar, Amit, 2015. "Energy consumption and greenhouse gas emissions in the recovery and extraction of crude bitumen from Canada’s oil sands," Applied Energy, Elsevier, vol. 143(C), pages 189-199.
    20. Alade, Olalekan S. & Mahmoud, Mohamed & Al Shehri, Dhafer & Mokheimer, Esmail M.A. & Sasaki, Kyuro & Ohashi, Ryo & Kamal, Muhammad Shahzad & Muhammad, Isah & Al-Nakhli, Ayman, 2022. "Experimental and numerical studies on production scheme to improve energy efficiency of bitumen production through insitu oil-in-water (O/W) emulsion," Energy, Elsevier, vol. 244(PA).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:151:y:2018:i:c:p:467-477. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.