IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v132y2017icp41-48.html
   My bibliography  Save this article

A novel configuration of natural gas diffusion burners to enhance optical, thermal and radiative characteristics of flame and reduce NOx emission

Author

Listed:
  • Pourhoseini, S.H.

Abstract

A novel, simple and feasible method was proposed for increasing intermediate soot concentration and enhancing thermal and radiative characteristics of natural gas flame. In the method, based on pyrolysis technique, a portion of natural gas, as the secondary gas injection rate, was directly injected into the flame to create high temperature and emissive intermediate soot particles. The portion of the fuel dedicated to secondary injection rate varied in the range of 20–55%. The flame structure, axial temperature, soot concentration and radiation flux were examined and compared with those resulted from a prevalent burner. Also, the optical properties of intermediate soot particles were studied by BOMEM FTIR, IR flame photography and TES-1332A digital luminance meter. The results indicated that natural gas molecules injected into the flame were dominantly pyrolyzed into soot particles. These highly luminous emissive particles enhance the total flame emissivity and radiation. Moreover, considering exhaust emission limits, there was an optimum secondary injection rate (40%), which, besides enhancing the radiation of flame, maintained the emission of CO pollutant and UHC lower than the standard values. Furthermore, in the pyrolysis process absorption of heat from flame reduces maximum flame temperature and consequently NOx emission by 35% in the optimum case.

Suggested Citation

  • Pourhoseini, S.H., 2017. "A novel configuration of natural gas diffusion burners to enhance optical, thermal and radiative characteristics of flame and reduce NOx emission," Energy, Elsevier, vol. 132(C), pages 41-48.
    • Handle: RePEc:eee:energy:v:132:y:2017:i:c:p:41-48
    DOI: 10.1016/j.energy.2017.04.167
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544217307326
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2017.04.167?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yang, Weihong & Blasiak, Wlodzimierz, 2005. "Numerical study of fuel temperature influence on single gas jet combustion in highly preheated and oxygen deficient air," Energy, Elsevier, vol. 30(2), pages 385-398.
    2. Draper, Teri Snow & Zeltner, Darrel & Tree, Dale R. & Xue, Yuan & Tsiava, Remi, 2012. "Two-dimensional flame temperature and emissivity measurements of pulverized oxy-coal flames," Applied Energy, Elsevier, vol. 95(C), pages 38-44.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yang, Xiao & He, Zhihong & Qiu, Penghua & Dong, Shikui & Tan, Heping, 2019. "Numerical investigations on combustion and emission characteristics of a novel elliptical jet-stabilized model combustor," Energy, Elsevier, vol. 170(C), pages 1082-1097.
    2. Maznoy, Anatoly & Kirdyashkin, Alexander & Minaev, Sergey & Markov, Alexey & Pichugin, Nikita & Yakovlev, Evgeny, 2018. "A study on the effects of porous structure on the environmental and radiative characteristics of cylindrical Ni-Al burners," Energy, Elsevier, vol. 160(C), pages 399-409.
    3. Pourhoseini, S.H. & Namvar-Mahboub, M. & Hosseini, Ebrahim & Alimoradi, Ashkan, 2021. "A comparative exploration of thermal, radiative and pollutant emission characteristics of oil burner flame using palm oil biodiesel-diesel blend fuel and diesel fuel," Energy, Elsevier, vol. 217(C).
    4. Ji, Jie & Gong, Changzhi & Wan, Huaxian & Gao, Zihe & Ding, Long, 2019. "Prediction of thermal radiation received by vertical targets based on two-dimensional flame shape from rectangular n-heptane pool fires with different aspect ratios," Energy, Elsevier, vol. 185(C), pages 644-652.
    5. Wan, Huaxian & Gao, Zihe & Ji, Jie & Zhang, Yongming & Li, Kaiyuan, 2018. "Experimental and theoretical study on flame front temperatures within ceiling jets from turbulent diffusion flames of n-heptane fuel," Energy, Elsevier, vol. 164(C), pages 79-86.
    6. Pourhoseini, S.H., 2020. "Enhancement of radiation characteristics and reduction of NOx emission in natural gas flame through silver-water nanofluid injection," Energy, Elsevier, vol. 194(C).
    7. Lopez-Ruiz, G. & Alava, I. & Urresti, I. & Blanco, J.M. & Naud, B., 2021. "Experimental and numerical study of NOx formation in a domestic H2/air coaxial burner at low Reynolds number," Energy, Elsevier, vol. 221(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Pourhoseini, S.H., 2020. "Enhancement of radiation characteristics and reduction of NOx emission in natural gas flame through silver-water nanofluid injection," Energy, Elsevier, vol. 194(C).
    2. He, Yizhuo & Zou, Chun & Song, Yu & Liu, Yang & Zheng, Chuguang, 2016. "Numerical study of characteristics on NO formation in methane MILD combustion with simultaneously hot and diluted oxidant and fuel (HDO/HDF)," Energy, Elsevier, vol. 112(C), pages 1024-1035.
    3. Ren, Tao & Modest, Michael F. & Fateev, Alexander & Sutton, Gavin & Zhao, Weijie & Rusu, Florin, 2019. "Machine learning applied to retrieval of temperature and concentration distributions from infrared emission measurements," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    4. Weijie Yan & Dongmei Chen & Zuomei Yang & Enyu Yan & Peitao Zhao, 2017. "Measurement of Soot Volume Fraction and Temperature for Oxygen-Enriched Ethylene Combustion Based on Flame Image Processing," Energies, MDPI, vol. 10(6), pages 1-16, May.
    5. Zhou, Dongdong & Cheng, Shusen, 2019. "Measurement study of the PCI process on the temperature distribution in raceway zone of blast furnace by using digital imaging techniques," Energy, Elsevier, vol. 174(C), pages 814-822.
    6. Chen, Junghui & Chan, Lester Lik Teck & Cheng, Yi-Cheng, 2013. "Gaussian process regression based optimal design of combustion systems using flame images," Applied Energy, Elsevier, vol. 111(C), pages 153-160.
    7. Ren, Shoujun & Yang, Haolin & Wang, Xiaohan, 2021. "The oxygen-deficient combustion and its effect on the NOx emission in a localized stratified vortex-tube combustor," Energy, Elsevier, vol. 235(C).
    8. Lawal, Mohammed S. & Fairweather, Michael & Gogolek, Peter & Ingham, Derek B. & Ma, Lin & Pourkashanian, Mohamed & Williams, Alan, 2013. "CFD predictions of wake-stabilised jet flames in a cross-flow," Energy, Elsevier, vol. 53(C), pages 259-269.
    9. Carlo Cravero & Alessandro Lamberti & Luca Poggio, 2023. "CFD Prediction of a Double Impulse Burner for Glass Furnaces," Energies, MDPI, vol. 16(11), pages 1-17, May.
    10. Liu, Jian & Song, Yidan & Xie, Gongnan & Sunden, Bengt, 2015. "Numerical modeling flow and heat transfer in dimpled cooling channels with secondary hemispherical protrusions," Energy, Elsevier, vol. 79(C), pages 1-19.
    11. Li, Xin & Hu, Longhua & Shang, Fengju, 2018. "Flame downwash transition and its maximum length with increasing fuel supply of non-premixed jet in cross flow," Energy, Elsevier, vol. 164(C), pages 298-305.
    12. Weijie Yan & Yunqi Ya & Feng Du & Hao Shao & Peitao Zhao, 2017. "Spectrometer-Based Line-of-Sight Temperature Measurements during Alkali-Pulverized Coal Combustion in a Power Station Boiler," Energies, MDPI, vol. 10(9), pages 1-14, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:132:y:2017:i:c:p:41-48. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.