IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v87y2010i7p2128-2141.html
   My bibliography  Save this article

Cost-effective CO2 emission reduction through heat, power and biofuel production from woody biomass: A spatially explicit comparison of conversion technologies

Author

Listed:
  • Schmidt, Johannes
  • Leduc, Sylvain
  • Dotzauer, Erik
  • Kindermann, Georg
  • Schmid, Erwin

Abstract

Bioenergy is regarded as cost-effective option to reduce CO2 emissions from fossil fuel combustion. Among newly developed biomass conversion technologies are biomass integrated gas combined cycle plants (BIGCC) as well as ethanol and methanol production based on woody biomass feedstock. Furthermore, bioenergy systems with carbon capture and storage (BECS) may allow negative CO2 emissions in the future. It is still not clear which woody biomass conversion technology reduces fossil CO2 emissions at least costs. This article presents a spatial explicit optimization model that assesses new biomass conversion technologies for fuel, heat and power production and compares them with woody pellets for heat production in Austria. The spatial distributions of biomass supply and energy demand have significant impact on the total supply costs of alternative bioenergy systems and are therefore included in the modeling process. Many model parameters that describe new bioenergy technologies are uncertain, because some of the technologies are not commercially developed yet. Monte-Carlo simulations are used to analyze model parameter uncertainty. Model results show that heat production with pellets is to be preferred over BIGCC at low carbon prices while BECS is cost-effective to reduce CO2 emissions at higher carbon prices. Fuel production - methanol as well as ethanol - reduces less CO2 emissions and is therefore less cost-effective in reducing CO2 emissions.

Suggested Citation

  • Schmidt, Johannes & Leduc, Sylvain & Dotzauer, Erik & Kindermann, Georg & Schmid, Erwin, 2010. "Cost-effective CO2 emission reduction through heat, power and biofuel production from woody biomass: A spatially explicit comparison of conversion technologies," Applied Energy, Elsevier, vol. 87(7), pages 2128-2141, July.
    • Handle: RePEc:eee:appene:v:87:y:2010:i:7:p:2128-2141
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(09)00494-2
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Leduc, Sylvain & Natarajan, Karthikeyan & Dotzauer, Erik & McCallum, Ian & Obersteiner, Michael, 2009. "Optimizing biodiesel production in India," Applied Energy, Elsevier, vol. 86(Supplemen), pages 125-131, November.
    2. Bram, S. & De Ruyck, J. & Lavric, D., 2009. "Using biomass: A system perturbation analysis," Applied Energy, Elsevier, vol. 86(2), pages 194-201, February.
    3. van der Zwaan, Bob & Gerlagh, Reyer, 2008. "The Economics of Geological CO2 Storage and Leakage," Climate Change Modelling and Policy Working Papers 6372, Fondazione Eni Enrico Mattei (FEEM).
    4. Kenneth Möllersten & Lin Gao & Jinyue Yan, 2006. "CO 2 Capture in Pulp and Paper Mills: CO 2 Balances and Preliminary Cost Assessment," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 11(5), pages 1129-1150, September.
    5. Marbe, Å & Harvey, S & Berntsson, T, 2004. "Biofuel gasification combined heat and power—new implementation opportunities resulting from combined supply of process steam and district heating," Energy, Elsevier, vol. 29(8), pages 1117-1137.
    6. Fatih Demirbas, M., 2009. "Biorefineries for biofuel upgrading: A critical review," Applied Energy, Elsevier, vol. 86(Supplemen), pages 151-161, November.
    7. Möllersten, Kenneth & Gao, Lin & Yan, Jinyue & Obersteiner, Michael, 2004. "Efficient energy systems with CO2 capture and storage from renewable biomass in pulp and paper mills," Renewable Energy, Elsevier, vol. 29(9), pages 1583-1598.
    8. Eriksson, Ljusk Ola & Bjorheden, Rolf, 1989. "Optimal storing, transport and processing for a forest-fuel supplier," European Journal of Operational Research, Elsevier, vol. 43(1), pages 26-33, November.
    9. Suntana, Asep S. & Vogt, Kristiina A. & Turnblom, Eric C. & Upadhye, Ravi, 2009. "Bio-methanol potential in Indonesia: Forest biomass as a source of bio-energy that reduces carbon emissions," Applied Energy, Elsevier, vol. 86(Supplemen), pages 215-221, November.
    10. Uddin, Sk Noim & Barreto, Leonardo, 2007. "Biomass-fired cogeneration systems with CO2 capture and storage," Renewable Energy, Elsevier, vol. 32(6), pages 1006-1019.
    11. Andre Faaij, 2006. "Modern Biomass Conversion Technologies," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 11(2), pages 335-367, March.
    12. Styles, David & Jones, Michael B., 2007. "Current and future financial competitiveness of electricity and heat from energy crops: A case study from Ireland," Energy Policy, Elsevier, vol. 35(8), pages 4355-4367, August.
    13. Armstrong, J. Scott & Collopy, Fred, 1992. "Error measures for generalizing about forecasting methods: Empirical comparisons," International Journal of Forecasting, Elsevier, vol. 8(1), pages 69-80, June.
    14. Madlener, Reinhard, 2007. "Innovation diffusion, public policy, and local initiative: The case of wood-fuelled district heating systems in Austria," Energy Policy, Elsevier, vol. 35(3), pages 1992-2008, March.
    15. Andersson, Eva & Harvey, Simon & Berntsson, Thore, 2006. "Energy efficient upgrading of biofuel integrated with a pulp mill," Energy, Elsevier, vol. 31(10), pages 1384-1394.
    16. Grohnheit, Poul Erik & Gram Mortensen, Bent Ole, 2003. "Competition in the market for space heating. District heating as the infrastructure for competition among fuels and technologies," Energy Policy, Elsevier, vol. 31(9), pages 817-826, July.
    17. -, 2009. "The economics of climate change," Sede Subregional de la CEPAL para el Caribe (Estudios e Investigaciones) 38679, Naciones Unidas Comisión Económica para América Latina y el Caribe (CEPAL).
    18. Streicher, Gerhard & Schmid, Erwin & Salhofer, Klaus, 2006. "Testing for the Efficiency of a Policy Intended to Meet Objectives: General Model and Application," Journal of Agricultural and Resource Economics, Western Agricultural Economics Association, vol. 31(2), pages 1-22, August.
    19. Makridakis, Spyros, 1993. "Accuracy measures: theoretical and practical concerns," International Journal of Forecasting, Elsevier, vol. 9(4), pages 527-529, December.
    20. Möllersten, K. & Yan, J. & Westermark, M., 2003. "Potential and cost-effectiveness of CO2 reductions through energy measures in Swedish pulp and paper mills," Energy, Elsevier, vol. 28(7), pages 691-710.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Schmidt, Johannes & Leduc, Sylvain & Dotzauer, Erik & Schmid, Erwin, 2011. "Cost-effective policy instruments for greenhouse gas emission reduction and fossil fuel substitution through bioenergy production in Austria," Energy Policy, Elsevier, vol. 39(6), pages 3261-3280, June.
    2. Schmidt, Johannes & Leduc, Sylvain & Dotzauer, Erik & Kindermann, Georg & Schmid, Erwin, 2009. "Using Monte Carlo Simulation to Account for Uncertainties in the Spatial Explicit Modeling of Biomass Fired Combined Heat and Power Potentials in Austria," Discussion Papers DP-43-2009, University of Natural Resources and Life Sciences, Vienna, Department of Economics and Social Sciences, Institute for Sustainable Economic Development.
    3. repec:zbw:inwedp:432009 is not listed on IDEAS
    4. Johannes Schmidt & Sylvain Leduc & Erik Dotzauer & Georg Kindermann & Erwin Schmid, 2009. "Using Monte Carlo Simulation to Account for Uncertainties in the Spatial Explicit Modeling of Biomass Fired Combined Heat and Power Potentials in Austria," Working Papers 432009, University of Natural Resources and Life Sciences, Vienna, Department of Economics and Social Sciences, Institute for Sustainable Economic Development.
    5. Yang, F. & Meerman, J.C. & Faaij, A.P.C., 2021. "Carbon capture and biomass in industry: A techno-economic analysis and comparison of negative emission options," Renewable and Sustainable Energy Reviews, Elsevier, vol. 144(C).
    6. Mesfun, Sennai & Sanchez, Daniel L. & Leduc, Sylvain & Wetterlund, Elisabeth & Lundgren, Joakim & Biberacher, Markus & Kraxner, Florian, 2017. "Power-to-gas and power-to-liquid for managing renewable electricity intermittency in the Alpine Region," Renewable Energy, Elsevier, vol. 107(C), pages 361-372.
    7. Kinoshita, Tsuguki & Ohki, Takashi & Yamagata, Yoshiki, 2010. "Woody biomass supply potential for thermal power plants in Japan," Applied Energy, Elsevier, vol. 87(9), pages 2923-2927, September.
    8. Tan, Raymond R. & Aviso, Kathleen B. & Barilea, Ivan U. & Culaba, Alvin B. & Cruz, Jose B., 2012. "A fuzzy multi-regional input–output optimization model for biomass production and trade under resource and footprint constraints," Applied Energy, Elsevier, vol. 90(1), pages 154-160.
    9. Sebastiano Cupertino, 2013. "Cost-benefit analysis of carbon dioxide capture and storage considering the impact of two different climate change mitigation regimes," ECONOMICS AND POLICY OF ENERGY AND THE ENVIRONMENT, FrancoAngeli Editore, vol. 2013(1), pages 73-89.
    10. Blaskowitz, Oliver & Herwartz, Helmut, 2011. "On economic evaluation of directional forecasts," International Journal of Forecasting, Elsevier, vol. 27(4), pages 1058-1065, October.
    11. Dean W. Wichern & Benito E. Flores, 2005. "Evaluating forecasts: a look at aggregate bias and accuracy measures," Journal of Forecasting, John Wiley & Sons, Ltd., vol. 24(6), pages 433-451.
    12. Bruce G. S. Hardie & Peter S. Fader & Robert Zeithammer, 2003. "Forecasting new product trial in a controlled test market environment," Journal of Forecasting, John Wiley & Sons, Ltd., vol. 22(5), pages 391-410.
    13. Bunn, Derek W. & Taylor, James W., 2001. "Setting accuracy targets for short-term judgemental sales forecasting," International Journal of Forecasting, Elsevier, vol. 17(2), pages 159-169.
    14. Yoon, Sung Wook & Jeong, Suk Jae, 2015. "An alternative methodology for planning baggage carousel capacity expansion: A case study of Incheon International Airport," Journal of Air Transport Management, Elsevier, vol. 42(C), pages 63-74.
    15. Demirbas, Ayhan, 2011. "Biodiesel from oilgae, biofixation of carbon dioxide by microalgae: A solution to pollution problems," Applied Energy, Elsevier, vol. 88(10), pages 3541-3547.
    16. Bob van der Zwaan & Reyer Gerlagh, 2016. "Offshore CCS and ocean acidification: a global long-term probabilistic cost-benefit analysis of climate change mitigation," Climatic Change, Springer, vol. 137(1), pages 157-170, July.
    17. Kim, Sungil & Kim, Heeyoung, 2016. "A new metric of absolute percentage error for intermittent demand forecasts," International Journal of Forecasting, Elsevier, vol. 32(3), pages 669-679.
    18. Goodwin, Paul & Lawton, Richard, 1999. "On the asymmetry of the symmetric MAPE," International Journal of Forecasting, Elsevier, vol. 15(4), pages 405-408, October.
    19. Davydenko, Andrey & Fildes, Robert, 2013. "Measuring forecasting accuracy: The case of judgmental adjustments to SKU-level demand forecasts," International Journal of Forecasting, Elsevier, vol. 29(3), pages 510-522.
    20. Makridakis, Spyros & Spiliotis, Evangelos & Assimakopoulos, Vassilios, 2020. "The M4 Competition: 100,000 time series and 61 forecasting methods," International Journal of Forecasting, Elsevier, vol. 36(1), pages 54-74.
    21. McKenzie, Jordi, 2011. "Mean absolute percentage error and bias in economic forecasting," Economics Letters, Elsevier, vol. 113(3), pages 259-262.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:87:y:2010:i:7:p:2128-2141. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.