IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v84y2007i5p553-564.html
   My bibliography  Save this article

Application of closed-loop oscillating heat-pipe with check valves (CLOHP/CV) air-preheater for reduced relative-humidity in drying systems

Author

Listed:
  • Meena, P.
  • Rittidech, S.
  • Poomsa-ad, N.

Abstract

This paper aims to design, construct, and test the CLOHP/CV air-preheater for reduced relative humidity in drying systems for recovering the waste heat from the drying cycle. The CLOHP/CV heat-exchanger consisted of 3.58 m long copper tubes, with an internal diameter of 0.002 m. The evaporator and condenser sections were 0.19 m long, the adiabatic sections were 0.08 m long, the hot-air velocities were 0.5, 0.75 and 1 m/s with the hot-air temperatures being 50, 60 and 70 °C, and the relative humidity was 100%. The working fluid was R134a with the filling ratio of 50%. It can be concluded that, with an increase in the hot-air temperature from 50 to 70 °C, the heat-transfer rate slightly increases. The velocity increases from 0.5, 0.75 to 1 m/s and the heat-transfer rate slightly decreases. The velocity increases from 0.5, 0.75 to 1 m/s and the effectiveness slightly decreases. The hot-air temperature increases from 50 to 70 °C and the effectiveness slightly increases. The relative humidity reduced to the range 54-72% from 89% to 100%. The CLOHP/CV air-preheater can reduce the relative humidity and achieve energy thrift.

Suggested Citation

  • Meena, P. & Rittidech, S. & Poomsa-ad, N., 2007. "Application of closed-loop oscillating heat-pipe with check valves (CLOHP/CV) air-preheater for reduced relative-humidity in drying systems," Applied Energy, Elsevier, vol. 84(5), pages 553-564, May.
  • Handle: RePEc:eee:appene:v:84:y:2007:i:5:p:553-564
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(06)00126-7
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Rittidech, S. & Dangeton, W. & Soponronnarit, S., 2005. "Closed-ended oscillating heat-pipe (CEOHP) air-preheater for energy thrift in a dryer," Applied Energy, Elsevier, vol. 81(2), pages 198-208, June.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jiaqiang, E. & Zhao, Xiaohuan & Liu, Haili & Chen, Jianmei & Zuo, Wei & Peng, Qingguo, 2016. "Field synergy analysis for enhancing heat transfer capability of a novel narrow-tube closed oscillating heat pipe," Applied Energy, Elsevier, vol. 175(C), pages 218-228.
    2. Qu, Jian & Wang, Qian, 2013. "Experimental study on the thermal performance of vertical closed-loop oscillating heat pipes and correlation modeling," Applied Energy, Elsevier, vol. 112(C), pages 1154-1160.
    3. Zeng, M. & Du, L.X. & Liao, D. & Chu, W.X. & Wang, Q.W. & Luo, Y. & Sun, Y., 2012. "Investigation on pressure drop and heat transfer performances of plate-fin iron air preheater unit with experimental and Genetic Algorithm methods," Applied Energy, Elsevier, vol. 92(C), pages 725-732.
    4. Ewa Zender–Świercz, 2021. "A Review of Heat Recovery in Ventilation," Energies, MDPI, vol. 14(6), pages 1-23, March.
    5. Haofan Mu & Weixiu Shi, 2024. "Review of Operation Performance and Application Status of Pulsating Heat Pipe," Sustainability, MDPI, vol. 16(7), pages 1-24, March.
    6. Wang, Junye, 2009. "Experimental investigation of the transient thermal performance of a bent heat pipe with grooved surface," Applied Energy, Elsevier, vol. 86(10), pages 2030-2037, October.
    7. He, Wei & Hong, Xiaoqiang & Zhao, Xudong & Zhang, Xingxing & Shen, Jinchun & Ji, Jie, 2015. "Operational performance of a novel heat pump assisted solar façade loop-heat-pipe water heating system," Applied Energy, Elsevier, vol. 146(C), pages 371-382.
    8. Jouhara, Hussam & Ezzuddin, Hatem, 2013. "Thermal performance characteristics of a wraparound loop heat pipe (WLHP) charged with R134A," Energy, Elsevier, vol. 61(C), pages 128-138.
    9. Han, Xiaohong & Wang, Xuehui & Zheng, Haoce & Xu, Xiangguo & Chen, Guangming, 2016. "Review of the development of pulsating heat pipe for heat dissipation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 692-709.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Srimuang, W. & Amatachaya, P., 2012. "A review of the applications of heat pipe heat exchangers for heat recovery," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(6), pages 4303-4315.
    2. Daghigh, Roonak & Shafieian, Abdellah, 2016. "An experimental study of a heat pipe evacuated tube solar dryer with heat recovery system," Renewable Energy, Elsevier, vol. 96(PA), pages 872-880.
    3. Alhuyi Nazari, Mohammad & Ahmadi, Mohammad H. & Ghasempour, Roghayeh & Shafii, Mohammad Behshad & Mahian, Omid & Kalogirou, Soteris & Wongwises, Somchai, 2018. "A review on pulsating heat pipes: From solar to cryogenic applications," Applied Energy, Elsevier, vol. 222(C), pages 475-484.
    4. Meena, P. & Rittidech, S. & Poomsa-ad, N., 2007. "Closed-loop oscillating heat-pipe with check valves (CLOHP/CVs) air-preheater for reducing relative humidity in drying systems," Applied Energy, Elsevier, vol. 84(4), pages 363-373, April.
    5. Jia, Yuting & Alva, Guruprasad & Fang, Guiyin, 2019. "Development and applications of photovoltaic–thermal systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 249-265.
    6. Jiaqiang, E. & Zhao, Xiaohuan & Liu, Haili & Chen, Jianmei & Zuo, Wei & Peng, Qingguo, 2016. "Field synergy analysis for enhancing heat transfer capability of a novel narrow-tube closed oscillating heat pipe," Applied Energy, Elsevier, vol. 175(C), pages 218-228.
    7. Zeng, M. & Du, L.X. & Liao, D. & Chu, W.X. & Wang, Q.W. & Luo, Y. & Sun, Y., 2012. "Investigation on pressure drop and heat transfer performances of plate-fin iron air preheater unit with experimental and Genetic Algorithm methods," Applied Energy, Elsevier, vol. 92(C), pages 725-732.
    8. Qu, Jian & Wang, Qian, 2013. "Experimental study on the thermal performance of vertical closed-loop oscillating heat pipes and correlation modeling," Applied Energy, Elsevier, vol. 112(C), pages 1154-1160.
    9. Han, Xiaohong & Wang, Xuehui & Zheng, Haoce & Xu, Xiangguo & Chen, Guangming, 2016. "Review of the development of pulsating heat pipe for heat dissipation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 692-709.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:84:y:2007:i:5:p:553-564. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.