IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v358y2024ics0306261924000102.html
   My bibliography  Save this article

Optimization control strategy for mixed-mode buildings based on thermal comfort model: A case study of office buildings

Author

Listed:
  • Yu, Ying
  • Xiang, Tianhui
  • Wang, Di
  • Yang, Liu

Abstract

Mixed-mode (MM) buildings reduce air conditioning (AC) energy consumption while maintaining indoor thermal comfort through the appropriate use of natural ventilation (NV). The objective of this investigation was to propose a method to determine the best NV operation range suitable for MM buildings and further to propose a change-over control strategy. First, the usual natural ventilation operating range (NV-range) was obtained based on the upper and lower comfort temperature limits of the adaptive comfort model. The usual NV-range was extended by adding threshold conditions, and then, it was divided into nine natural ventilation operation subranges (NVOSs). Second, the comfort and energy performance of each NVOS were analyzed through a co-simulation for an MM office building in Xi'an, China, as an example to obtain the optimal NV-range for the local climate. The results showed that the proposed optimal NV-range reduced the number of discomfort hours by 248.33 h while increasing the energy savings by 13.29% compared to those of the commonly used NV-ranges. Finally, the control scheme with the adaptive comfort model changed to the PMV model (ACM-PMV-CS) with the addition of a 1.5-h transition period was proposed in order to solve the problem of using the steady-state PMV model directly in the AC mode under the frequent switching conditions between the NV and AC modes. The results showed that ACM-PMV-1.5 h transition period resulted in a reduction in the number of discomfort hours (248.33 h) and a 35.46% increase in the energy savings compared to those of ACM-PMV-CS without a transition period.

Suggested Citation

  • Yu, Ying & Xiang, Tianhui & Wang, Di & Yang, Liu, 2024. "Optimization control strategy for mixed-mode buildings based on thermal comfort model: A case study of office buildings," Applied Energy, Elsevier, vol. 358(C).
    • Handle: RePEc:eee:appene:v:358:y:2024:i:c:s0306261924000102
    DOI: 10.1016/j.apenergy.2024.122627
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261924000102
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2024.122627?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Chen, Yujiao & Tong, Zheming & Wu, Wentao & Samuelson, Holly & Malkawi, Ali & Norford, Leslie, 2019. "Achieving natural ventilation potential in practice: Control schemes and levels of automation," Applied Energy, Elsevier, vol. 235(C), pages 1141-1152.
    2. Oropeza-Perez, Ivan & Østergaard, Poul Alberg, 2014. "Energy saving potential of utilizing natural ventilation under warm conditions – A case study of Mexico," Applied Energy, Elsevier, vol. 130(C), pages 20-32.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fiorentini, Massimo & Tartarini, Federico & Ledo Gomis, Laia & Daly, Daniel & Cooper, Paul, 2019. "Development of an enthalpy-based index to assess climatic potential for ventilative cooling of buildings: An Australian example," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    2. Tong, Zheming & Chen, Yujiao & Malkawi, Ali & Liu, Zhu & Freeman, Richard B., 2016. "Energy saving potential of natural ventilation in China: The impact of ambient air pollution," Applied Energy, Elsevier, vol. 179(C), pages 660-668.
    3. Shuiguang Tong & Xiang Zhang & Zheming Tong & Yanling Wu & Ning Tang & Wei Zhong, 2019. "Online Ash Fouling Prediction for Boiler Heating Surfaces based on Wavelet Analysis and Support Vector Regression," Energies, MDPI, vol. 13(1), pages 1-20, December.
    4. Liwei Wen & Kyosuke Hiyama, 2018. "Target Air Change Rate and Natural Ventilation Potential Maps for Assisting with Natural Ventilation Design During Early Design Stage in China," Sustainability, MDPI, vol. 10(5), pages 1-16, May.
    5. Amin Mohammadi & Mahmoud Reza Saghafi & Mansoureh Tahbaz & Farshad Nasrollahi, 2017. "Effects of Vernacular Climatic Strategies (VCS) on Energy Consumption in Common Residential Buildings in Southern Iran: The Case Study of Bushehr City," Sustainability, MDPI, vol. 9(11), pages 1-26, October.
    6. Martins, Nuno R. & Carrilho da Graça, Guilherme, 2017. "Impact of outdoor PM2.5 on natural ventilation usability in California’s nondomestic buildings," Applied Energy, Elsevier, vol. 189(C), pages 711-724.
    7. Érick-G. Espinosa-Martínez & Sergio Quezada-García & M. Azucena Escobedo-Izquierdo & Ricardo I. Cázares-Ramírez, 2024. "Comparative and Sensibility Analysis of Cooling Systems," Energies, MDPI, vol. 17(17), pages 1-15, September.
    8. Rackes, Adams & Melo, Ana Paula & Lamberts, Roberto, 2016. "Naturally comfortable and sustainable: Informed design guidance and performance labeling for passive commercial buildings in hot climates," Applied Energy, Elsevier, vol. 174(C), pages 256-274.
    9. Chen, Yujiao & Malkawi, Ali & Liu, Zhu & Freeman, Richard Barry & Tong, Zheming, 2016. "Energy Saving Potential of Natural Ventilation in China: The Impact of Ambient Air Pollution," Scholarly Articles 27733689, Harvard University Department of Economics.
    10. Ahmad, Abrar & Memon, Shazim Ali, 2024. "A novel method to evaluate phase change materials' impact on buildings' energy, economic, and environmental performance via controlled natural ventilation," Applied Energy, Elsevier, vol. 353(PB).
    11. Francesco Mancini & Gianluigi Lo Basso & Livio de Santoli, 2019. "Energy Use in Residential Buildings: Impact of Building Automation Control Systems on Energy Performance and Flexibility," Energies, MDPI, vol. 12(15), pages 1-21, July.
    12. Wang, Ran & Lu, Shilei & Feng, Wei, 2020. "Impact of adjustment strategies on building design process in different climates oriented by multiple performance," Applied Energy, Elsevier, vol. 266(C).
    13. Barone, G. & Vassiliades, C. & Elia, C. & Savvides, A. & Kalogirou, S., 2023. "Design optimization of a solar system integrated double-skin façade for a clustered housing unit," Renewable Energy, Elsevier, vol. 215(C).
    14. Rempel, Alexandra R. & Danis, Jackson & Rempel, Alan W. & Fowler, Michael & Mishra, Sandipan, 2022. "Improving the passive survivability of residential buildings during extreme heat events in the Pacific Northwest," Applied Energy, Elsevier, vol. 321(C).
    15. Abdul Mujeebu, Muhammad & Alshamrani, Othman Subhi, 2016. "Prospects of energy conservation and management in buildings – The Saudi Arabian scenario versus global trends," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 1647-1663.
    16. Tong, Zheming & Chen, Yujiao & Malkawi, Ali, 2016. "Defining the Influence Region in neighborhood-scale CFD simulations for natural ventilation design," Applied Energy, Elsevier, vol. 182(C), pages 625-633.
    17. Chen, Yujiao & Tong, Zheming & Wu, Wentao & Samuelson, Holly & Malkawi, Ali & Norford, Leslie, 2019. "Achieving natural ventilation potential in practice: Control schemes and levels of automation," Applied Energy, Elsevier, vol. 235(C), pages 1141-1152.
    18. Elaouzy, Y. & El Fadar, A., 2022. "Energy, economic and environmental benefits of integrating passive design strategies into buildings: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    19. Wang, Zhe & Hong, Tianzhen, 2020. "Reinforcement learning for building controls: The opportunities and challenges," Applied Energy, Elsevier, vol. 269(C).
    20. Hiyama, Kyosuke & Glicksman, Leon, 2015. "Preliminary design method for naturally ventilated buildings using target air change rate and natural ventilation potential maps in the United States," Energy, Elsevier, vol. 89(C), pages 655-666.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:358:y:2024:i:c:s0306261924000102. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.