IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v230y2018icp889-911.html
   My bibliography  Save this article

Quantitative study on environment and energy information for land use planning scenarios in eco-city planning stage

Author

Listed:
  • Yeo, In-Ae
  • Lee, Eunok

Abstract

In this study, we propose a series of urban planning strategies for evaluating possibilities in urban planning scenarios, with the objective of building a “low-carbon green city.” We describe the process of constructing an Environment and Energy Planning Information database (E-GIS DB) and experimentally evaluate this for a case study area in a planned city. The construction of the E-GIS DB comprises: (a) collection of urban planning data, (b) consolidation of the urban space data into a single layer and creation of an overlaying 200 m × 200 m mesh in the area of interest, (c) calculation of building contents (use, scale, and structure/material), land use/cover, and altitude, and (d) derivation of a representative value for each factor in the mesh unit, and distribution of attributes across the area of interest. Based on the E-GIS DB, we considered one baseline and 22 alternative urban planning scenarios across the three stages of zoning plan, land use plan, and district unit plan, which exhibit variations in building scale and land cover. Statistical analysis shows that the environmental planning factors in the E-GIS DB (especially urban density) differ significantly between the three planning stages. Considering the precision of environmental and energy predictions, the construction of an E-GIS DB is recommended at district unit plan, land use plan, and zoning plan stages, in that order. The district unit planning stage is the most appropriate because it is closest to the realization of the urban development plan. The urban scenarios are assigned to three representative categories based on environmental and energy use characteristics: (a) scenarios with unacceptably high urban air temperature and energy use, (b) optimal scenarios, which exhibit the best cooling effect and low energy use, and (c) sub-optimal scenarios that must either be improved to achieve optimum environmental and energy outcomes, or else be replaced with an alternative scenario from group (b). When more optimal scenarios (recommended group for improved environmental performance and lower energy use) were applied, lower bound of FAR for building complexes was formed and eco-friendly land coverage such as soil and green cover was increased by 150% and 170%, respectively, which induced and urban cooling effect and resulted in energy savings. Subsequently, urban air temperature and total daily energy demand on the hottest summer day was lowered by 1.5 °C and approximately 100 W/m2 compared to the most unacceptable scenario.

Suggested Citation

  • Yeo, In-Ae & Lee, Eunok, 2018. "Quantitative study on environment and energy information for land use planning scenarios in eco-city planning stage," Applied Energy, Elsevier, vol. 230(C), pages 889-911.
    • Handle: RePEc:eee:appene:v:230:y:2018:i:c:p:889-911
    DOI: 10.1016/j.apenergy.2018.09.014
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261918313217
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2018.09.014?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Geros, V. & Santamouris, M. & Amourgis, S. & Medved, S. & Milford, E. & Robinson, G. & Steemers, K. & Karatasou, S., 2006. "A distant-learning training module on the environmental design of urban buildings," Renewable Energy, Elsevier, vol. 31(15), pages 2447-2459.
    2. Krüger, E. & Pearlmutter, D. & Rasia, F., 2010. "Evaluating the impact of canyon geometry and orientation on cooling loads in a high-mass building in a hot dry environment," Applied Energy, Elsevier, vol. 87(6), pages 2068-2078, June.
    3. Bieber, Niclas & Ker, Jen Ho & Wang, Xiaonan & Triantafyllidis, Charalampos & van Dam, Koen H. & Koppelaar, Rembrandt H.E.M. & Shah, Nilay, 2018. "Sustainable planning of the energy-water-food nexus using decision making tools," Energy Policy, Elsevier, vol. 113(C), pages 584-607.
    4. Yeo, In-Ae & Yoon, Seong-Hwan & Yee, Jurng-Jae, 2013. "Development of an urban energy demand forecasting system to support environmentally friendly urban planning," Applied Energy, Elsevier, vol. 110(C), pages 304-317.
    5. Chen, Yixing & Hong, Tianzhen & Piette, Mary Ann, 2017. "Automatic generation and simulation of urban building energy models based on city datasets for city-scale building retrofit analysis," Applied Energy, Elsevier, vol. 205(C), pages 323-335.
    6. Loulas, Nikolaos M. & Karteris, Marinos M. & Pilavachi, Petros A. & Papadopoulos, Agis M., 2012. "Photovoltaics in urban environment: A case study for typical apartment buildings in Greece," Renewable Energy, Elsevier, vol. 48(C), pages 453-463.
    7. Yeo, In-Ae & Yoon, Seong-Hwan & Yee, Jurng-Jae, 2013. "Development of an Environment and energy Geographical Information System (E-GIS) construction model to support environmentally friendly urban planning," Applied Energy, Elsevier, vol. 104(C), pages 723-739.
    8. Alhamwi, Alaa & Medjroubi, Wided & Vogt, Thomas & Agert, Carsten, 2017. "GIS-based urban energy systems models and tools: Introducing a model for the optimisation of flexibilisation technologies in urban areas," Applied Energy, Elsevier, vol. 191(C), pages 1-9.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wojciech Bonenberg & Wojciech Skórzewski & Ling Qi & Yuhong Han & Wojciech Czekała & Mo Zhou, 2023. "An Energy-Saving-Oriented Approach to Urban Design—Application in the Local Conditions of Poznań Metropolitan Area (Poland)," Sustainability, MDPI, vol. 15(14), pages 1-23, July.
    2. Xia, Chuyu & Chen, Bin, 2020. "Urban land-carbon nexus based on ecological network analysis," Applied Energy, Elsevier, vol. 276(C).
    3. Wang, Shaojian & Xie, Zihan & Wu, Rong & Feng, Kuishang, 2022. "How does urbanization affect the carbon intensity of human well-being? A global assessment," Applied Energy, Elsevier, vol. 312(C).
    4. Yu, L. & Li, Y.P. & Huang, G.H., 2019. "Planning municipal-scale mixed energy system for stimulating renewable energy under multiple uncertainties - The City of Qingdao in Shandong Province, China," Energy, Elsevier, vol. 166(C), pages 1120-1133.
    5. Wang, Xinru & Long, Ruyin & Sun, Qingqing & Chen, Hong & Jiang, Shiyan & Wang, Yujie & Li, Qianwen & Yang, Shuhan, 2024. "Spatial spillover effects and driving mechanisms of carbon emission reduction in new energy demonstration cities," Applied Energy, Elsevier, vol. 357(C).
    6. Beata Stahre Wästberg & Monica Billger & Marco Adelfio, 2020. "A User-Based Look at Visualization Tools for Environmental Data and Suggestions for Improvement—An Inventory among City Planners in Gothenburg," Sustainability, MDPI, vol. 12(7), pages 1-20, April.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nutkiewicz, Alex & Yang, Zheng & Jain, Rishee K., 2018. "Data-driven Urban Energy Simulation (DUE-S): A framework for integrating engineering simulation and machine learning methods in a multi-scale urban energy modeling workflow," Applied Energy, Elsevier, vol. 225(C), pages 1176-1189.
    2. Guglielmina Mutani & Valeria Todeschi & Simone Beltramino, 2020. "Energy Consumption Models at Urban Scale to Measure Energy Resilience," Sustainability, MDPI, vol. 12(14), pages 1-31, July.
    3. Ma, Weiwu & Fang, Song & Liu, Gang & Zhou, Ruoyu, 2017. "Modeling of district load forecasting for distributed energy system," Applied Energy, Elsevier, vol. 204(C), pages 181-205.
    4. Tukia, Toni & Uimonen, Semen & Siikonen, Marja-Liisa & Donghi, Claudio & Lehtonen, Matti, 2019. "Modeling the aggregated power consumption of elevators – the New York city case study," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    5. Yang, Xiu'e & Liu, Shuli & Zou, Yuliang & Ji, Wenjie & Zhang, Qunli & Ahmed, Abdullahi & Han, Xiaojing & Shen, Yongliang & Zhang, Shaoliang, 2022. "Energy-saving potential prediction models for large-scale building: A state-of-the-art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    6. Yeo, In-Ae & Yee, Jurng-Jae, 2014. "A proposal for a site location planning model of environmentally friendly urban energy supply plants using an environment and energy geographical information system (E-GIS) database (DB) and an artifi," Applied Energy, Elsevier, vol. 119(C), pages 99-117.
    7. Ali, Usman & Shamsi, Mohammad Haris & Bohacek, Mark & Purcell, Karl & Hoare, Cathal & Mangina, Eleni & O’Donnell, James, 2020. "A data-driven approach for multi-scale GIS-based building energy modeling for analysis, planning and support decision making," Applied Energy, Elsevier, vol. 279(C).
    8. Katal, Ali & Mortezazadeh, Mohammad & Wang, Liangzhu (Leon) & Yu, Haiyi, 2022. "Urban building energy and microclimate modeling – From 3D city generation to dynamic simulations," Energy, Elsevier, vol. 251(C).
    9. Valeria Todeschi & Roberto Boghetti & Jérôme H. Kämpf & Guglielmina Mutani, 2021. "Evaluation of Urban-Scale Building Energy-Use Models and Tools—Application for the City of Fribourg, Switzerland," Sustainability, MDPI, vol. 13(4), pages 1-22, February.
    10. Gassar, Abdo Abdullah Ahmed & Cha, Seung Hyun, 2021. "Review of geographic information systems-based rooftop solar photovoltaic potential estimation approaches at urban scales," Applied Energy, Elsevier, vol. 291(C).
    11. Johansson, Tim & Olofsson, Thomas & Mangold, Mikael, 2017. "Development of an energy atlas for renovation of the multifamily building stock in Sweden," Applied Energy, Elsevier, vol. 203(C), pages 723-736.
    12. Chen, Shaoqing & Chen, Bin, 2015. "Urban energy consumption: Different insights from energy flow analysis, input–output analysis and ecological network analysis," Applied Energy, Elsevier, vol. 138(C), pages 99-107.
    13. Mauree, Dasaraden & Naboni, Emanuele & Coccolo, Silvia & Perera, A.T.D. & Nik, Vahid M. & Scartezzini, Jean-Louis, 2019. "A review of assessment methods for the urban environment and its energy sustainability to guarantee climate adaptation of future cities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 112(C), pages 733-746.
    14. Chen, Han & Chen, Wenying, 2019. "Potential impact of shifting coal to gas and electricity for building sectors in 28 major northern cities of China," Applied Energy, Elsevier, vol. 236(C), pages 1049-1061.
    15. Tian, Shen & Shao, Shuangquan & Liu, Bin, 2019. "Investigation on transient energy consumption of cold storages: Modeling and a case study," Energy, Elsevier, vol. 180(C), pages 1-9.
    16. Younghun Choi & Takuro Kobashi & Yoshiki Yamagata & Akito Murayama, 2021. "Assessment of waterfront office redevelopment plan on optimal building energy demand and rooftop photovoltaics for urban decarbonization," Papers 2108.09029, arXiv.org.
    17. Roth, Jonathan & Martin, Amory & Miller, Clayton & Jain, Rishee K., 2020. "SynCity: Using open data to create a synthetic city of hourly building energy estimates by integrating data-driven and physics-based methods," Applied Energy, Elsevier, vol. 280(C).
    18. Michiel Fremouw & Annamaria Bagaini & Paolo De Pascali, 2020. "Energy Potential Mapping: Open Data in Support of Urban Transition Planning," Energies, MDPI, vol. 13(5), pages 1-15, March.
    19. Haleh Moghaddasi & Charles Culp & Jorge Vanegas & Saptarshi Das & Mehrdad Ehsani, 2022. "An Adaptable Net Zero Model: Energy Analysis of a Monitored Case Study," Energies, MDPI, vol. 15(11), pages 1-24, May.
    20. Santagata, R. & Ripa, M. & Ulgiati, S., 2017. "An environmental assessment of electricity production from slaughterhouse residues. Linking urban, industrial and waste management systems," Applied Energy, Elsevier, vol. 186(P2), pages 175-188.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:230:y:2018:i:c:p:889-911. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.