IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v215y2018icp679-689.html
   My bibliography  Save this article

The effect of a stepped lip piston design on performance and emissions from a high-speed diesel engine

Author

Listed:
  • Leach, Felix
  • Ismail, Riyaz
  • Davy, Martin
  • Weall, Adam
  • Cooper, Brian

Abstract

Understanding engine-out NOx and soot emissions from light-duty diesel engines is vital for improving combustion system design and ultimately for reducing aftertreatment requirements. In this work two piston bowl shapes, a standard re-entrant bowl and a bowl with a stepped lip, are tested experimentally and numerically at two part-load operating points (1500 rpm/6.8 bar net IMEP and 1750 rpm/13.5 bar net IMEP), and four full-load operating points (1500, 2000, 3000, and 4000 rpm). The results show that the stepped lip design consistently increases the 50–90% MFB duration across all operating conditions due to the trapping of the flame in the region of the stepped lip. Use of the stepped bowl allowed injection timing to be advanced at full load, a condition constrained, in this work, by strict limits of cylinder pressure and exhaust temperature. However, despite these changes in combustion behavior engine out emissions were found to be largely insensitive to the bowl shape. No statistical difference in NOx and soot emissions between the two bowl geometries was observed at part load. A minor penalty in NOx emissions, statistically significant at ∼67% CI, is reported for the stepped bowl design at some full load points.

Suggested Citation

  • Leach, Felix & Ismail, Riyaz & Davy, Martin & Weall, Adam & Cooper, Brian, 2018. "The effect of a stepped lip piston design on performance and emissions from a high-speed diesel engine," Applied Energy, Elsevier, vol. 215(C), pages 679-689.
    • Handle: RePEc:eee:appene:v:215:y:2018:i:c:p:679-689
    DOI: 10.1016/j.apenergy.2018.02.076
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261918302010
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2018.02.076?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. S., d'Ambrosio & A., Ferrari, 2018. "Diesel engines equipped with piezoelectric and solenoid injectors: hydraulic performance of the injectors and comparison of the emissions, noise and fuel consumption," Applied Energy, Elsevier, vol. 211(C), pages 1324-1342.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Doppalapudi, A.T. & Azad, A.K. & Khan, M.M.K., 2021. "Combustion chamber modifications to improve diesel engine performance and reduce emissions: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    2. Yousefi, Amin & Guo, Hongsheng & Birouk, Madjid, 2020. "Split diesel injection effect on knocking of natural gas/diesel dual-fuel engine at high load conditions," Applied Energy, Elsevier, vol. 279(C).
    3. Jena, Ashutosh & Singh, Akhilendra Pratap & Agarwal, Avinash Kumar, 2022. "Optical and computational investigations of the effect of Spray-Swirl interactions on autoignition and soot formation in a compression ignition engine fuelled by Diesel, dieseline and diesohol," Applied Energy, Elsevier, vol. 324(C).
    4. Zhao, Xiaohuan & Liu, Fang & Wang, Chunhua, 2022. "Effects of different piston combustion chamber heights on heat transfer and energy conversion performance enhancement of a heavy-duty truck diesel engine," Energy, Elsevier, vol. 249(C).
    5. Federico Millo & Andrea Piano & Benedetta Peiretti Paradisi & Mario Rocco Marzano & Andrea Bianco & Francesco C. Pesce, 2020. "Development and Assessment of an Integrated 1D-3D CFD Codes Coupling Methodology for Diesel Engine Combustion Simulation and Optimization," Energies, MDPI, vol. 13(7), pages 1-21, April.
    6. Ferrari, A. & Novara, C. & Paolucci, E. & Vento, O. & Violante, M. & Zhang, T., 2018. "Design and rapid prototyping of a closed-loop control strategy of the injected mass for the reduction of CO2, combustion noise and pollutant emissions in diesel engines," Applied Energy, Elsevier, vol. 232(C), pages 358-367.
    7. Pastor, José V. & García, Antonio & Micó, Carlos & Lewiski, Felipe & Vassallo, Alberto & Pesce, Francesco Concetto, 2021. "Effect of a novel piston geometry on the combustion process of a light-duty compression ignition engine: An optical analysis," Energy, Elsevier, vol. 221(C).
    8. Leach, Felix & Ismail, Riyaz & Davy, Martin, 2018. "Engine-out emissions from a modern high speed diesel engine – The importance of Nozzle Tip Protrusion," Applied Energy, Elsevier, vol. 226(C), pages 340-352.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jarosław Ziółkowski & Mateusz Oszczypała & Jerzy Małachowski & Joanna Szkutnik-Rogoż, 2021. "Use of Artificial Neural Networks to Predict Fuel Consumption on the Basis of Technical Parameters of Vehicles," Energies, MDPI, vol. 14(9), pages 1-23, May.
    2. Zhu, Dengting & Zheng, Xinqian, 2019. "Fuel consumption and emission characteristics in asymmetric twin-scroll turbocharged diesel engine with two exhaust gas recirculation circuits," Applied Energy, Elsevier, vol. 238(C), pages 985-995.
    3. Leach, Felix & Ismail, Riyaz & Davy, Martin, 2018. "Engine-out emissions from a modern high speed diesel engine – The importance of Nozzle Tip Protrusion," Applied Energy, Elsevier, vol. 226(C), pages 340-352.
    4. Stefano d’Ambrosio & Alessandro Ferrari & Alessandro Mancarella & Salvatore Mancò & Antonio Mittica, 2019. "Comparison of the Emissions, Noise, and Fuel Consumption Comparison of Direct and Indirect Piezoelectric and Solenoid Injectors in a Low-Compression-Ratio Diesel Engine," Energies, MDPI, vol. 12(21), pages 1-16, October.
    5. T. M. Yunus Khan, 2020. "A Review of Performance-Enhancing Innovative Modifications in Biodiesel Engines," Energies, MDPI, vol. 13(17), pages 1-22, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:215:y:2018:i:c:p:679-689. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.