IDEAS home Printed from https://ideas.repec.org/h/zbw/hiclch/209266.html
   My bibliography  Save this book chapter

Identification of Design Variables for a Supply Chain Risk Management Audit

In: Innovations and Strategies for Logistics and Supply Chains: Technologies, Business Models and Risk Management. Proceedings of the Hamburg International Conference of Logistics (HICL), Vol. 20

Author

Listed:
  • Schröder, Meike
  • Beck, Johannes
  • Kersten, Wolfgang

Abstract

Due to an increasing vulnerability in today's supply chains a supply chain risk management (SCRM) system is strongly recommended, especially for companies with a high degree of dependence on supply chain partners. However, as a permanent and effective use of the SCRM system is not only ensured by a successful implementation, an appropriate control mechanism needs to be implemented. Auditing the SCRM system can be such a solution. The main objective of this study is the identification of variables and their possible design related to SCRM systems. Based on an extensive literature review aiming to identify those variables, an empirical study with experts in the field of auditing is carried out. The transmission of the results to the concept of SCRM leads to possible configurations of the variables, both for a general internal SCRM self-audit and an audit focused on small and medium sized enterprises (SME).

Suggested Citation

  • Schröder, Meike & Beck, Johannes & Kersten, Wolfgang, 2015. "Identification of Design Variables for a Supply Chain Risk Management Audit," Chapters from the Proceedings of the Hamburg International Conference of Logistics (HICL), in: Kersten, Wolfgang & Blecker, Thorsten & Ringle, Christian M. (ed.), Innovations and Strategies for Logistics and Supply Chains: Technologies, Business Models and Risk Management. Proceedings of the Hamburg Internationa, volume 20, pages 479-501, Hamburg University of Technology (TUHH), Institute of Business Logistics and General Management.
    • Handle: RePEc:zbw:hiclch:209266
    DOI: 10.15480/882.1264
    as

    Download full text from publisher

    File URL: https://www.econstor.eu/bitstream/10419/209266/1/hicl-2015-20-479.pdf
    Download Restriction: no
    File URL: https://libkey.io/10.15480/882.1264?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Tang, Christopher S., 2006. "Perspectives in supply chain risk management," International Journal of Production Economics, Elsevier, vol. 103(2), pages 451-488, October.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jie Wu & Zhixin Chen & Xiang Ji, 2020. "Sustainable trade promotion decisions under demand disruption in manufacturer-retailer supply chains," Annals of Operations Research, Springer, vol. 290(1), pages 115-143, July.
    2. Pasura Aungkulanon & Walailak Atthirawong & Pongchanun Luangpaiboon & Wirachchaya Chanpuypetch, 2024. "Navigating Supply Chain Resilience: A Hybrid Approach to Agri-Food Supplier Selection," Mathematics, MDPI, vol. 12(10), pages 1-42, May.
    3. Tang, Liang & Jing, Ke & He, Jie & Stanley, H. Eugene, 2016. "Robustness of assembly supply chain networks by considering risk propagation and cascading failure," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 459(C), pages 129-139.
    4. Yingqiu Zhu & Ruiyi Wang & Mingfei Feng & Lei Qin & Ben-Chang Shia & Ming-Chih Chen, 2024. "Supply Chain Analysis Based on Community Detection of Multi-Layer Weighted Networks," Mathematics, MDPI, vol. 12(22), pages 1-21, November.
    5. Zhao, Na, 2019. "Managing interactive collaborative mega project supply chains under infectious risks," International Journal of Production Economics, Elsevier, vol. 218(C), pages 275-286.
    6. Li, Yongjian & Zhen, Xueping & Qi, Xiangtong & Cai, Gangshu (George), 2016. "Penalty and financial assistance in a supply chain with supply disruption," Omega, Elsevier, vol. 61(C), pages 167-181.
    7. Seyyed Mohammad Seyyed Alizadeh Ganji & Mohammad Hayati, 2016. "Identifying and Assessing the Risks in the Supply Chain," Modern Applied Science, Canadian Center of Science and Education, vol. 10(6), pages 1-74, June.
    8. Qazi, Abroon & Dickson, Alex & Quigley, John & Gaudenzi, Barbara, 2018. "Supply chain risk network management: A Bayesian belief network and expected utility based approach for managing supply chain risks," International Journal of Production Economics, Elsevier, vol. 196(C), pages 24-42.
    9. Fan, Yingjie & Schwartz, Frank & Voß, Stefan, 2017. "Flexible supply chain planning based on variable transportation modes," International Journal of Production Economics, Elsevier, vol. 183(PC), pages 654-666.
    10. Bilsel, R. Ufuk & Ravindran, A., 2011. "A multiobjective chance constrained programming model for supplier selection under uncertainty," Transportation Research Part B: Methodological, Elsevier, vol. 45(8), pages 1284-1300, September.
    11. Rika Ampuh Hadiguna, 2012. "Decision support framework for risk assessment of sustainable supply chain," International Journal of Logistics Economics and Globalisation, Inderscience Enterprises Ltd, vol. 4(1/2), pages 35-54.
    12. Johnson, Mark & Mena, Carlos, 2008. "Supply chain management for servitised products: A multi-industry case study," International Journal of Production Economics, Elsevier, vol. 114(1), pages 27-39, July.
    13. Han, Xiaohua & Wu, Haiyan & Yang, Qianxia & Shang, Jennifer, 2016. "Reverse channel selection under remanufacturing risks: Balancing profitability and robustness," International Journal of Production Economics, Elsevier, vol. 182(C), pages 63-72.
    14. Lorenzo Bruno Prataviera & Alessandro Creazza & Marco Melacini & Fabrizio Dallari, 2022. "Heading for Tomorrow: Resilience Strategies for Post-COVID-19 Grocery Supply Chains," Sustainability, MDPI, vol. 14(4), pages 1-17, February.
    15. Ranveer Singh Rana & Dinesh Kumar & Kanika Prasad & K. Mathiyazhagan, 2024. "Mitigating the impact of demand disruption on perishable inventory in a two-warehouse system," Operations Management Research, Springer, vol. 17(2), pages 469-504, June.
    16. Mariusz Szuster & Malgorzata Lotko, 2022. "Disruptions and Risk Management in Supply Chains Before and During the COVID-19 Pandemic," European Research Studies Journal, European Research Studies Journal, vol. 0(Special A), pages 225-234.
    17. He, Yuanqiong & Keung Lai, Kin & Sun, Hongyi & Chen, Yun, 2014. "The impact of supplier integration on customer integration and new product performance: The mediating role of manufacturing flexibility under trust theory," International Journal of Production Economics, Elsevier, vol. 147(PB), pages 260-270.
    18. Chaharsooghi, S. Kamal & Heydari, Jafar, 2010. "Supply chain coordination for the joint determination of order quantity and reorder point using credit option," European Journal of Operational Research, Elsevier, vol. 204(1), pages 86-95, July.
    19. Raka, Chatchai & Liangrokapart, Jirapan, 2015. "Supply Chain Risk Management: A Case Study in Thailand," Chapters from the Proceedings of the Hamburg International Conference of Logistics (HICL), in: Kersten, Wolfgang & Blecker, Thorsten & Ringle, Christian M. (ed.), Innovations and Strategies for Logistics and Supply Chains: Technologies, Business Models and Risk Management. Proceedings of the Hamburg Internationa, volume 20, pages 557-580, Hamburg University of Technology (TUHH), Institute of Business Logistics and General Management.
    20. Rameshwar Dubey & David J. Bryde & Cyril Foropon & Gary Graham & Mihalis Giannakis & Deepa Bhatt Mishra, 2022. "Agility in humanitarian supply chain: an organizational information processing perspective and relational view," Annals of Operations Research, Springer, vol. 319(1), pages 559-579, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:zbw:hiclch:209266. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: ZBW - Leibniz Information Centre for Economics (email available below). General contact details of provider: https://hicl.org/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.