IDEAS home Printed from https://ideas.repec.org/a/taf/tprsxx/v55y2017i5p1498-1515.html
   My bibliography  Save this article

Additive manufacturing technology in spare parts supply chain: a comparative study

Author

Listed:
  • Yao Li
  • Guozhu Jia
  • Yang Cheng
  • Yuchen Hu

Abstract

Additive Manufacturing (AM) technology has the potential to significantly improve supply chain dynamics. The purpose of this paper is to investigate the impact of AM on spare parts supply chain. Three supply chain scenarios are investigated in this paper, namely conventional supply chain, centralised AM-based supply chain and distributed AM-based supply chain. Based on system dynamics simulations, this paper specifically compares three supply chain scenarios, in terms of total variable cost and carbon emission. The results show the spare part supply chain utilising AM is indeed superior to the traditional one in sustainable performance. It is also expected that AM can facilitate the spare parts supply chain to achieve more economic benefits along with its development. To our knowledge, this paper is one of the early studies that explores the impact of AM on supply chain performance and quantitatively examines the superiority of utilising AM in spare parts supply chain. Some suggestions are also provided to help managers adopting AM in their spare parts supply chains.

Suggested Citation

  • Yao Li & Guozhu Jia & Yang Cheng & Yuchen Hu, 2017. "Additive manufacturing technology in spare parts supply chain: a comparative study," International Journal of Production Research, Taylor & Francis Journals, vol. 55(5), pages 1498-1515, March.
    • Handle: RePEc:taf:tprsxx:v:55:y:2017:i:5:p:1498-1515
    DOI: 10.1080/00207543.2016.1231433
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1080/00207543.2016.1231433
    Download Restriction: Access to full text is restricted to subscribers.
    File URL: https://libkey.io/10.1080/00207543.2016.1231433?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Harshad Sonar & Vivek Khanzode & Milind Akarte, 2022. "Additive Manufacturing Enabled Supply Chain Management: A Review and Research Directions," Vision, , vol. 26(2), pages 147-162, June.
    2. Binoy Debnath & Md Shihab Shakur & Fahmida Tanjum & M. Azizur Rahman & Ziaul Haq Adnan, 2022. "Impact of Additive Manufacturing on the Supply Chain of Aerospace Spare Parts Industry—A Review," Logistics, MDPI, vol. 6(2), pages 1-25, April.
    3. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    4. Kapetaniou, Chrystalla & Rieple, Alison & Pilkington, Alan & Frandsen, Thomas & Pisano, Paola, 2018. "Building the layers of a new manufacturing taxonomy: How 3D printing is creating a new landscape of production eco-systems and competitive dynamics," Technological Forecasting and Social Change, Elsevier, vol. 128(C), pages 22-35.
    5. Victor Verboeket & Harold Krikke, 2019. "Additive Manufacturing: A Game Changer in Supply Chain Design," Logistics, MDPI, vol. 3(2), pages 1-27, April.
    6. Harshad Chandrakant Sonar & Vivek Khanzode & Milind Akarte, 2020. "A Conceptual Framework on Implementing Additive Manufacturing Technology Towards Firm Competitiveness," International Journal of Global Business and Competitiveness, Springer, vol. 15(2), pages 121-135, December.
    7. Amine Belhadi & Sachin S. Kamble & Venkatesh Mani & Charbel Jose Chiappetta Jabbour & Imane Benkhati, 2022. "Building supply chain resilience and efficiency through additive manufacturing : An ambidextrous perspective on the dynamic capability view," Post-Print hal-04325568, HAL.
    8. Mariani, Marcello & Borghi, Matteo, 2019. "Industry 4.0: A bibliometric review of its managerial intellectual structure and potential evolution in the service industries," Technological Forecasting and Social Change, Elsevier, vol. 149(C).
    9. Martin Baumers & Luca Beltrametti & Angelo Gasparre & Richard Hague, 2017. "Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation," International Journal of Production Research, Taylor & Francis Journals, vol. 55(23), pages 6957-6970, December.
    10. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    11. Hettiarachchi, Biman Darshana & Brandenburg, Marcus & Seuring, Stefan, 2022. "Connecting additive manufacturing to circular economy implementation strategies: Links, contingencies and causal loops," International Journal of Production Economics, Elsevier, vol. 246(C).
    12. Nazanin Hosseini Arian & Alireza Pooya & Fariborz Rahimnia & Ali Sibevei, 2021. "Assessment the effect of rapid prototyping implementation on supply chain sustainability: a system dynamics approach," Operations Management Research, Springer, vol. 14(3), pages 467-493, December.
    13. N. Knofius & M. C. Heijden & A. Sleptchenko & W. H. M. Zijm, 2021. "Improving effectiveness of spare parts supply by additive manufacturing as dual sourcing option," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 43(1), pages 189-221, March.
    14. Ding, Jin & Baumers, Martin & Clark, Elizabeth A. & Wildman, Ricky D., 2021. "The economics of additive manufacturing: Towards a general cost model including process failure," International Journal of Production Economics, Elsevier, vol. 237(C).
    15. Beltagui, Ahmad & Kunz, Nathan & Gold, Stefan, 2020. "The role of 3D printing and open design on adoption of socially sustainable supply chain innovation," International Journal of Production Economics, Elsevier, vol. 221(C).
    16. Han Wang & Martin Baumers & Shreeja Basak & Yinfeng He & Ian Ashcroft, 2022. "The impact of the risk of build failure on energy consumption in additive manufacturing," Journal of Industrial Ecology, Yale University, vol. 26(5), pages 1771-1783, October.
    17. Horst Treiblmaier, 2019. "Combining Blockchain Technology and the Physical Internet to Achieve Triple Bottom Line Sustainability: A Comprehensive Research Agenda for Modern Logistics and Supply Chain Management," Logistics, MDPI, vol. 3(1), pages 1-13, February.
    18. Sun, Luoyi & Hua, Guowei & Cheng, T.C.E. & Wang, Yixiao, 2020. "How to price 3D-printed products? Pricing strategy for 3D printing platforms," International Journal of Production Economics, Elsevier, vol. 226(C).
    19. Belhadi, Amine & Kamble, Sachin S. & Venkatesh, Mani & Chiappetta Jabbour, Charbel Jose & Benkhati, Imane, 2022. "Building supply chain resilience and efficiency through additive manufacturing: An ambidextrous perspective on the dynamic capability view," International Journal of Production Economics, Elsevier, vol. 249(C).
    20. Jose M. Framinan & Paz Perez-Gonzalez & Victor Fernandez-Viagas, 2023. "An overview on the use of operations research in additive manufacturing," Annals of Operations Research, Springer, vol. 322(1), pages 5-40, March.
    21. Matthias M. Meyer & Andreas H. Glas & Michael Eßig, 2021. "Systematic review of sourcing and 3D printing: make-or-buy decisions in industrial buyer–supplier relationships," Management Review Quarterly, Springer, vol. 71(4), pages 723-752, October.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:taf:tprsxx:v:55:y:2017:i:5:p:1498-1515. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Chris Longhurst (email available below). General contact details of provider: http://www.tandfonline.com/TPRS20 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.