IDEAS home Printed from https://ideas.repec.org/a/spr/opmare/v15y2022i3d10.1007_s12063-021-00248-2.html
   My bibliography  Save this article

Analysis of the MORT method applicability for risk management in supply chains

Author

Listed:
  • Ualison Rébula Oliveira

    (Universidade Federal Fluminense (UFF) / MPA-PPGA and MSG-LATEC)

  • Camila Oliveira Santos

    (Universidade Federal Fluminense (UFF) / MPA-PPGA and MSG-LATEC)

  • Gabriel Elias Lunz Chaves

    (Universidade Federal Fluminense (UFF) / MPA-PPGA and MSG-LATEC)

  • Vicente Aprigliano Fernandes

    (Pontificia Universidad Católica de Valparaíso)

Abstract

Although the Management Oversight and Risk Tree (MORT) method is considered a respected analytical procedure to investigate causes and contributing factors of accidents and incidents in different types of businesses, its application in Supply Chain Risk Management was not found in the literature (SCRM). Given this gap, the general objective of this research is to analyze the applicability of the MORT Method in SCRM. Methodologically, the research was supported by an in-depth case study in a cylinder requalification company located in Rio de Janeiro (Brazil). The case study included document analysis, direct observation and structured interviews based on questions previously defined by the MORT Method. As the main theoretical contribution, the research applied, in an innovative way, the MORT Method in SCRM. As the main practical contribution, sequenced, detailed and exemplified steps were developed, so that the MORT Method can be reproduced by other professionals in supply chains. As a limitation, it is observed that the case study only covers the cylinder requalification process, focusing on endogenous risks and failing to address exogenous risks in the supply chain. As a main result, it was possible to identify all the factors that contributed to the damage to cylinder valves; damage that has the potential to have severe consequences for other companies in the supply chain.

Suggested Citation

  • Ualison Rébula Oliveira & Camila Oliveira Santos & Gabriel Elias Lunz Chaves & Vicente Aprigliano Fernandes, 2022. "Analysis of the MORT method applicability for risk management in supply chains," Operations Management Research, Springer, vol. 15(3), pages 1361-1382, December.
    • Handle: RePEc:spr:opmare:v:15:y:2022:i:3:d:10.1007_s12063-021-00248-2
    DOI: 10.1007/s12063-021-00248-2
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s12063-021-00248-2
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s12063-021-00248-2?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. N. Viswanadham & Roshan S. Gaonkar, 2008. "Risk Management in Global Supply Chain Networks," International Series in Operations Research & Management Science, in: Christopher S. Tang & Chung-Piaw Teo & Kwok-Kee Wei (ed.), Supply Chain Analysis, pages 201-222, Springer.
    2. Thun, Jörn-Henrik & Hoenig, Daniel, 2011. "An empirical analysis of supply chain risk management in the German automotive industry," International Journal of Production Economics, Elsevier, vol. 131(1), pages 242-249, May.
    3. Gabriela Costa Dias & Ualison Rébula de Oliveira & Gilson Brito Alves Lima & Vicente Aprigliano Fernandes, 2021. "Risk Management in the Import/Export Process of an Automobile Company: A Contribution for Supply Chain Sustainability," Sustainability, MDPI, vol. 13(11), pages 1-20, May.
    4. Santos, Rachel Barbosa & de Oliveira, Ualison Rébula & Rocha, Henrique Martins, 2018. "Failure mapping for occupational safety management in the film and television industry," International Journal of Production Economics, Elsevier, vol. 203(C), pages 1-12.
    5. Seyedmohsen Hosseini & Dmitry Ivanov & Alexandre Dolgui, 2020. "Ripple effect modelling of supplier disruption: integrated Markov chain and dynamic Bayesian network approach," International Journal of Production Research, Taylor & Francis Journals, vol. 58(11), pages 3284-3303, June.
    6. George Baryannis & Sahar Validi & Samir Dani & Grigoris Antoniou, 2019. "Supply chain risk management and artificial intelligence: state of the art and future research directions," International Journal of Production Research, Taylor & Francis Journals, vol. 57(7), pages 2179-2202, April.
    7. Tang, Christopher S., 2006. "Perspectives in supply chain risk management," International Journal of Production Economics, Elsevier, vol. 103(2), pages 451-488, October.
    8. Ritesh Ojha & Abhijeet Ghadge & Manoj Kumar Tiwari & Umit S. Bititci, 2018. "Bayesian network modelling for supply chain risk propagation," International Journal of Production Research, Taylor & Francis Journals, vol. 56(17), pages 5795-5819, September.
    9. El Baz, Jamal & Ruel, Salomée, 2021. "Can supply chain risk management practices mitigate the disruption impacts on supply chains’ resilience and robustness? Evidence from an empirical survey in a COVID-19 outbreak era," International Journal of Production Economics, Elsevier, vol. 233(C).
    10. B Ritchie & C Brindley, 2007. "An emergent framework for supply chain risk management and performance measurement," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 58(11), pages 1398-1411, November.
    11. Yingchun Guo, 2011. "Research on Knowledge-Oriented Supply ChainRisk Management System Model," Journal of Management and Strategy, Journal of Management and Strategy, Sciedu Press, vol. 2(2), pages 72-77, June.
    12. Tang, Ou & Nurmaya Musa, S., 2011. "Identifying risk issues and research advancements in supply chain risk management," International Journal of Production Economics, Elsevier, vol. 133(1), pages 25-34, September.
    13. Blome, Constantin & Schoenherr, Tobias, 2011. "Supply chain risk management in financial crises--A multiple case-study approach," International Journal of Production Economics, Elsevier, vol. 134(1), pages 43-57, November.
    14. Munir, Manal & Jajja, Muhammad Shakeel Sadiq & Chatha, Kamran Ali & Farooq, Sami, 2020. "Supply chain risk management and operational performance: The enabling role of supply chain integration," International Journal of Production Economics, Elsevier, vol. 227(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Gang & Fan, Huan & Lee, Peter K.C. & Cheng, T.C.E., 2015. "Joint supply chain risk management: An agency and collaboration perspective," International Journal of Production Economics, Elsevier, vol. 164(C), pages 83-94.
    2. Chen, Hong Long, 2023. "Influence of supply chain risks on project financial performance," International Journal of Production Economics, Elsevier, vol. 260(C).
    3. Seyyed Mohammad Seyyed Alizadeh Ganji & Mohammad Hayati, 2016. "Identifying and Assessing the Risks in the Supply Chain," Modern Applied Science, Canadian Center of Science and Education, vol. 10(6), pages 1-74, June.
    4. Rika Ampuh Hadiguna, 2012. "Decision support framework for risk assessment of sustainable supply chain," International Journal of Logistics Economics and Globalisation, Inderscience Enterprises Ltd, vol. 4(1/2), pages 35-54.
    5. Kauppi, Katri & Longoni, Annachiara & Caniato, Federico & Kuula, Markku, 2016. "Managing country disruption risks and improving operational performance: risk management along integrated supply chains," International Journal of Production Economics, Elsevier, vol. 182(C), pages 484-495.
    6. De Lima, Felipe Alexandre & Seuring, Stefan, 2023. "A Delphi study examining risk and uncertainty management in circular supply chains," International Journal of Production Economics, Elsevier, vol. 258(C).
    7. Guertler, Benjamin & Spinler, Stefan, 2015. "Supply risk interrelationships and the derivation of key supply risk indicators," Technological Forecasting and Social Change, Elsevier, vol. 92(C), pages 224-236.
    8. Yutong Liu & Jian Du & Taewon Kang & Mingu Kang, 2024. "Establishing supply chain transparency and its impact on supply chain risk management and resilience," Operations Management Research, Springer, vol. 17(3), pages 1157-1171, September.
    9. K. Katsaliaki & P. Galetsi & S. Kumar, 2022. "Supply chain disruptions and resilience: a major review and future research agenda," Annals of Operations Research, Springer, vol. 319(1), pages 965-1002, December.
    10. Jajja, Muhammad Shakeel Sadiq & Chatha, Kamran Ali & Farooq, Sami, 2018. "Impact of supply chain risk on agility performance: Mediating role of supply chain integration," International Journal of Production Economics, Elsevier, vol. 205(C), pages 118-138.
    11. Laurent Lim, Lâm & Alpan, Gülgün & Penz, Bernard, 2014. "Reconciling sales and operations management with distant suppliers in the automotive industry: A simulation approach," International Journal of Production Economics, Elsevier, vol. 151(C), pages 20-36.
    12. Qazi, Abroon & Dickson, Alex & Quigley, John & Gaudenzi, Barbara, 2018. "Supply chain risk network management: A Bayesian belief network and expected utility based approach for managing supply chain risks," International Journal of Production Economics, Elsevier, vol. 196(C), pages 24-42.
    13. Dmitry Ivanov, 2022. "Viable supply chain model: integrating agility, resilience and sustainability perspectives—lessons from and thinking beyond the COVID-19 pandemic," Annals of Operations Research, Springer, vol. 319(1), pages 1411-1431, December.
    14. Guertler, Benjamin & Spinler, Stefan, 2015. "When does operational risk cause supply chain enterprises to tip? A simulation of intra-organizational dynamics," Omega, Elsevier, vol. 57(PA), pages 54-69.
    15. Hatem Elleuch & Wafik Hachicha & Habib Chabchoub, 2014. "A combined approach for supply chain risk management: description and application to a real hospital pharmaceutical case study," Journal of Risk Research, Taylor & Francis Journals, vol. 17(5), pages 641-663, May.
    16. Wiengarten, Frank & Humphreys, Paul & Gimenez, Cristina & McIvor, Ronan, 2016. "Risk, risk management practices, and the success of supply chain integration," International Journal of Production Economics, Elsevier, vol. 171(P3), pages 361-370.
    17. Gupta, Shivam & Modgil, Sachin & Choi, Tsan-Ming & Kumar, Ajay & Antony, Jiju, 2023. "Influences of artificial intelligence and blockchain technology on financial resilience of supply chains," International Journal of Production Economics, Elsevier, vol. 261(C).
    18. Efrah Wozir Abdulahi & Luo Fan, 2021. "Exploring and Validating Container Operational Risk Scale in Container Shipping: The Case of Ethiopian Shipping and Logistics Service Enterprise," Sustainability, MDPI, vol. 13(16), pages 1-21, August.
    19. Madhukar Chhimwal & Saurabh Agrawal & Girish Kumar, 2021. "Measuring Circular Supply Chain Risk: A Bayesian Network Methodology," Sustainability, MDPI, vol. 13(15), pages 1-22, July.
    20. Liu, Hua & Xu, Xiaoping & Cheng, T.C.E. & Yu, Yugang, 2024. "Building resilience or maintaining robustness: Insights from relational view and information processing perspective," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 188(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:opmare:v:15:y:2022:i:3:d:10.1007_s12063-021-00248-2. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.