IDEAS home Printed from https://ideas.repec.org/a/spr/endesu/v25y2023i9d10.1007_s10668-022-02477-2.html
   My bibliography  Save this article

Sustainable optimal production policies for an imperfect production system with trade credit under different carbon emission regulations

Author

Listed:
  • Falguni Mahato

    (Sidho-Kanho-Birsha University)

  • Chandan Mahato

    (Sidho-Kanho-Birsha University)

  • Gour Chandra Mahata

    (Sidho-Kanho-Birsha University)

Abstract

Production systems are subject to imperfect processes among other factors that may produce items of imperfect quality. To avoid further losses, regular preventive maintenance, and system breakdowns, firms can make changes in their production planning decisions or invest in a green inventory management. Every manufacturing system generates some harmful by-products which are the causes of environmental pollution, and it is increasing day by day. As a result, one of the goals of this research is to develop a sustainable smart manufacturing model with less waste and controlled pollution. Moreover, permissible delay in payment is a popular payment method and important proportion of company finance. This research proposes a manufacturing plan for products by controlling pollution through sustainable and smart production under warranty and preventive maintenance performed with trade credits. Two different sustainable production models are presented here by considering pollution control costs. A sustainable production model with variable pollution costs is examined under the influence of three pollution control mechanisms to improve the model's applicability. The paper's novelty lies in introducing pollution control costs and pollution control mechanisms together in a flexible, sustainable production system. In comparison with the other models, the model with a variable pollution cost appears to be more sustainable as, in this case, there is a 27.76% reduction in the pollution level compared to the other models. Implementing three pollution-controlling strategies, such as pollution cap, pollution cap & trade, and pollution tax, resulted in reductions of 32.52%, 1.72%, and 0.84% in pollution levels, respectively. A sensitivity analysis of the obtained results is also carried out to show the model's strength and robustness.

Suggested Citation

  • Falguni Mahato & Chandan Mahato & Gour Chandra Mahata, 2023. "Sustainable optimal production policies for an imperfect production system with trade credit under different carbon emission regulations," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 25(9), pages 10073-10099, September.
    • Handle: RePEc:spr:endesu:v:25:y:2023:i:9:d:10.1007_s10668-022-02477-2
    DOI: 10.1007/s10668-022-02477-2
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10668-022-02477-2
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s10668-022-02477-2?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mei-Chuan Cheng & Tsu-Pang Hsieh & Hsiu-Mei Lee & Liang-Yuh Ouyang, 2020. "Optimal ordering policies for deteriorating items with a return period and price-dependent demand under two-phase advance sales," Operational Research, Springer, vol. 20(2), pages 585-604, June.
    2. Gour Chandra Mahata, 2017. "A production-inventory model with imperfect production process and partial backlogging under learning considerations in fuzzy random environments," Journal of Intelligent Manufacturing, Springer, vol. 28(4), pages 883-897, April.
    3. Chang Wook Kang & Misbah Ullah & Mitali Sarkar & Muhammad Omair & Biswajit Sarkar, 2019. "A Single-Stage Manufacturing Model with Imperfect Items, Inspections, Rework, and Planned Backorders," Mathematics, MDPI, vol. 7(5), pages 1-18, May.
    4. Bonney, Maurice & Jaber, Mohamad Y., 2011. "Environmentally responsible inventory models: Non-classical models for a non-classical era," International Journal of Production Economics, Elsevier, vol. 133(1), pages 43-53, September.
    5. Muhammad Tayyab & Biswajit Sarkar & Bernardo Nugroho Yahya, 2018. "Imperfect Multi-Stage Lean Manufacturing System with Rework under Fuzzy Demand," Mathematics, MDPI, vol. 7(1), pages 1-18, December.
    6. Pal, Brojeswar & Sana, Shib Sankar & Chaudhuri, Kripasindhu, 2014. "Joint pricing and ordering policy for two echelon imperfect production inventory model with two cycles," International Journal of Production Economics, Elsevier, vol. 155(C), pages 229-238.
    7. Sana, Shib Sankar & Goyal, Suresh Kumar & Chaudhuri, Kripasindhu, 2007. "An imperfect production process in a volume flexible inventory model," International Journal of Production Economics, Elsevier, vol. 105(2), pages 548-559, February.
    8. Jie Min & Yong-Wu Zhou & Gui-Qing Liu & Sheng-Dong Wang, 2012. "An EPQ model for deteriorating items with inventory-level-dependent demand and permissible delay in payments," International Journal of Systems Science, Taylor & Francis Journals, vol. 43(6), pages 1039-1053.
    9. Chayanika Rout & Ravi Shankar Kumar & Debjani Chakraborty & Adrijit Goswami, 2019. "An EPQ model for deteriorating items with imperfect production, inspection errors, rework and shortages : a type-2 fuzzy approach," OPSEARCH, Springer;Operational Research Society of India, vol. 56(3), pages 657-688, September.
    10. Asif Iqbal Malik & Byung Soo Kim, 2020. "A Constrained Production System Involving Production Flexibility and Carbon Emissions," Mathematics, MDPI, vol. 8(2), pages 1-21, February.
    11. Alberto Cambini & Laura Martein, 2009. "Generalized Convexity and Optimization," Lecture Notes in Economics and Mathematical Systems, Springer, number 978-3-540-70876-6, July.
    12. Puspita Mahata & Gour Chandra Mahata, 2020. "Production and payment policies for an imperfect manufacturing system with discount cash flows analysis in fuzzy random environments," Mathematical and Computer Modelling of Dynamical Systems, Taylor & Francis Journals, vol. 26(4), pages 374-408, July.
    13. Lee, Sunghee & Kim, Daeki, 2014. "An optimal policy for a single-vendor single-buyer integrated production–distribution model with both deteriorating and defective items," International Journal of Production Economics, Elsevier, vol. 147(PA), pages 161-170.
    14. J.N. Roul & K. Maity & S. Kar & M. Maiti, 2015. "Multi-item reliability dependent imperfect production inventory optimal control models with dynamic demand under uncertain resource constraint," International Journal of Production Research, Taylor & Francis Journals, vol. 53(16), pages 4993-5016, August.
    15. Zhong, Yuanguang & Shu, Jia & Xie, Wei & Zhou, Yong-Wu, 2018. "Optimal trade credit and replenishment policies for supply chain network design," Omega, Elsevier, vol. 81(C), pages 26-37.
    16. Hsu, Jia-Tzer & Hsu, Lie-Fern, 2013. "An EOQ model with imperfect quality items, inspection errors, shortage backordering, and sales returns," International Journal of Production Economics, Elsevier, vol. 143(1), pages 162-170.
    17. Mitali Sarkar & Byung Do Chung, 2021. "Effect of Renewable Energy to Reduce Carbon Emissions under a Flexible Production System: A Step Toward Sustainability," Energies, MDPI, vol. 14(1), pages 1-14, January.
    18. Balkhi, Zaid T., 2011. "Optimal economic ordering policy with deteriorating items under different supplier trade credits for finite horizon case," International Journal of Production Economics, Elsevier, vol. 133(1), pages 216-223, September.
    19. Yu-Chung Tsao, 2016. "Joint location, inventory, and preservation decisions for non-instantaneous deterioration items under delay in payments," International Journal of Systems Science, Taylor & Francis Journals, vol. 47(3), pages 572-585, February.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mei-Chuan Cheng & Hui-Chiung Lo & Chih-Te Yang, 2023. "Optimizing Pricing, Pre-Sale Incentive, and Inventory Decisions with Advance Sales and Trade Credit under Carbon Tax Policy," Mathematics, MDPI, vol. 11(11), pages 1-18, May.
    2. Behnamfar, Reza & Sajadi, Seyed Mojtaba & Tootoonchy, Mahshid, 2022. "Developing environmental hedging point policy with variable demand: A machine learning approach," International Journal of Production Economics, Elsevier, vol. 254(C).
    3. Chen, Sheng-Chih & Teng, Jinn-Tsair & Skouri, Konstantina, 2014. "Economic production quantity models for deteriorating items with up-stream full trade credit and down-stream partial trade credit," International Journal of Production Economics, Elsevier, vol. 155(C), pages 302-309.
    4. Waqas Ahmed & Muhammad Jalees & Muhammad Omair & Zainab Mukhtar & Muhammad Imran, 2022. "An inventory management for global supply chain through reworking of defective items having positive inventory level under multi-trade-credit-period," Annals of Operations Research, Springer, vol. 315(1), pages 1-28, August.
    5. Janssen, Larissa & Claus, Thorsten & Sauer, Jürgen, 2016. "Literature review of deteriorating inventory models by key topics from 2012 to 2015," International Journal of Production Economics, Elsevier, vol. 182(C), pages 86-112.
    6. Chandan Mahato & Gour Chandra Mahata, 2023. "Sustainable partial backordering inventory model under linked-to-order credit policy and all-units discount with capacity constraint and carbon emissions," Flexible Services and Manufacturing Journal, Springer, vol. 35(3), pages 896-944, September.
    7. Cynthia Griselle De-la-Cruz-Márquez & Leopoldo Eduardo Cárdenas-Barrón & J. David Porter & Imelda de Jesús Loera-Hernández & Neale R. Smith & Armando Céspedes-Mota & Gerardo Treviño-Garza & Rafael Ern, 2023. "An Inventory Model for Growing Items When the Demand Is Price Sensitive with Imperfect Quality, Inspection Errors, Carbon Emissions, and Planned Backorders," Mathematics, MDPI, vol. 11(21), pages 1-45, October.
    8. Battini, Daria & Persona, Alessandro & Sgarbossa, Fabio, 2014. "A sustainable EOQ model: Theoretical formulation and applications," International Journal of Production Economics, Elsevier, vol. 149(C), pages 145-153.
    9. Boualem Alleche & Vicenţiu D. Rădulescu, 2017. "Further on Set-Valued Equilibrium Problems and Applications to Browder Variational Inclusions," Journal of Optimization Theory and Applications, Springer, vol. 175(1), pages 39-58, October.
    10. Chandra K. Jaggi & Mamta Gupta & Amrina Kausar & Sunil Tiwari, 2019. "Inventory and credit decisions for deteriorating items with displayed stock dependent demand in two-echelon supply chain using Stackelberg and Nash equilibrium solution," Annals of Operations Research, Springer, vol. 274(1), pages 309-329, March.
    11. Sorin-Mihai Grad & Felipe Lara, 2022. "An extension of the proximal point algorithm beyond convexity," Journal of Global Optimization, Springer, vol. 82(2), pages 313-329, February.
    12. Alberto Del Pia & Robert Hildebrand & Robert Weismantel & Kevin Zemmer, 2016. "Minimizing Cubic and Homogeneous Polynomials over Integers in the Plane," Mathematics of Operations Research, INFORMS, vol. 41(2), pages 511-530, May.
    13. Sudip Adak & G. S. Mahapatra, 2021. "Effect of inspection and rework of probabilistic defective production on two-layer supply chain incorporating deterioration and reliability dependent demand," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 12(3), pages 565-578, June.
    14. Bikash Koli Dey & Hyesung Seok, 2024. "Intelligent inventory management with autonomation and service strategy," Journal of Intelligent Manufacturing, Springer, vol. 35(1), pages 307-330, January.
    15. A. Kabgani & F. Lara, 2023. "Semistrictly and neatly quasiconvex programming using lower global subdifferentials," Journal of Global Optimization, Springer, vol. 86(4), pages 845-865, August.
    16. Giorgio, 2019. "On Second-Order Optimality Conditions in Smooth Nonlinear Programming Problems," DEM Working Papers Series 171, University of Pavia, Department of Economics and Management.
    17. Singa Wang Chiu & Liang-Wei You & Tsu-Ming Yeh & Tiffany Chiu, 2020. "The Collective Influence of Component Commonality, Adjustable-Rate, Postponement, and Rework on Multi-Item Manufacturing Decision," Mathematics, MDPI, vol. 8(9), pages 1-18, September.
    18. Xie, Xiaofeng & Shi, Xinyu & Gu, Jing & Xu, Xun, 2023. "Examining the Contagion Effect of Credit Risk in a Supply Chain under Trade Credit and Bank Loan Offering," Omega, Elsevier, vol. 115(C).
    19. Li, Ruihai & Chan, Ya-Lan & Chang, Chun-Tao & Cárdenas-Barrón, Leopoldo Eduardo, 2017. "Pricing and lot-sizing policies for perishable products with advance-cash-credit payments by a discounted cash-flow analysis," International Journal of Production Economics, Elsevier, vol. 193(C), pages 578-589.
    20. Castellano, Davide & Gallo, Mosè & Grassi, Andrea & Santillo, Liberatina C., 2019. "The effect of GHG emissions on production, inventory replenishment and routing decisions in a single vendor-multiple buyers supply chain," International Journal of Production Economics, Elsevier, vol. 218(C), pages 30-42.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:endesu:v:25:y:2023:i:9:d:10.1007_s10668-022-02477-2. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.