IDEAS home Printed from https://ideas.repec.org/a/inm/oropre/v48y2000i6p951-964.html
   My bibliography  Save this article

A Production/Inventory System Subject to Failure with Limited Repair Capacity

Author

Listed:
  • Seyed M.R. Iravani

    (Department of Industrial Engineering and Management Sciences, Northwestern University, Evanston, Illinois 60208)

  • Izak Duenyas

    (University of Michigan, Ann Arbor, Michigan 48109)

  • Tava Lennon Olsen

    (University of Michigan, Ann Arbor, Michigan 48109)

Abstract

We consider a production/inventory system consisting of M machines and K (K(le)M) repair crews in which machines are subject to time dependent failures. The repair operations on each machine require one repair crew during the whole operation. In this production/inventory system, each machine is assigned to produce a different item according to a make-to-stock routine. Inventories of each item service a Poisson demand process, and the unsatisfied demands are lost. The objective is to minimize the sum of the average holding and lost-sales penalty costs.We formulate the joint problem of (1) allocating the limited number of repairmen to failed machines and (2) deciding how much finished goods inventory to keep as a Markov decision process. We show that the optimal policy has a very complicated structure. We introduce two models to compute optimal base-stock policies in systems with identical machines, where first break first repair (FBFR) or preemptive priority (PPRI) repair policies are used. Then we present two heuristics to perform the same optimization analysis in systems with different machines. Finally, we compare the combination of the optimal base-stock policy (as the production policy) and the FBFR and PPRI policies (as the repair policies) to the optimal dynamic policy, and through numerical examples we show that this integration creates a solution that is close to the optimal dynamic policy. The results indicate that simple policies for determining finished goods inventory levels and repair crew assignment to failed machines can work well as long as the two problems are addressed in a coordinated manner.

Suggested Citation

  • Seyed M.R. Iravani & Izak Duenyas & Tava Lennon Olsen, 2000. "A Production/Inventory System Subject to Failure with Limited Repair Capacity," Operations Research, INFORMS, vol. 48(6), pages 951-964, December.
    • Handle: RePEc:inm:oropre:v:48:y:2000:i:6:p:951-964
    DOI: 10.1287/opre.48.6.951.12389
    as

    Download full text from publisher

    File URL: http://dx.doi.org/10.1287/opre.48.6.951.12389
    Download Restriction: no
    File URL: https://libkey.io/10.1287/opre.48.6.951.12389?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. M. Jeya Chandra & Robert G. Sargent, 1983. "A Numerical Method to Obtain the Equilibrium Results for the Multiple Finite Source Priority Queueing Model," Management Science, INFORMS, vol. 29(11), pages 1298-1308, November.
    2. Robert R. Meyer & Michael H. Rothkopf & Stephen A. Smith, 1979. "Reliability and Inventory in a Production-Storage System," Management Science, INFORMS, vol. 25(8), pages 799-807, August.
    3. M. Berg & M. J. M. Posner & H. Zhao, 1994. "Production-Inventory Systems with Unreliable Machines," Operations Research, INFORMS, vol. 42(1), pages 111-118, February.
    4. Phadhana Tosirisuk & Jeya Chandra, 1990. "Multiple finite source queueing model with dynamic priority scheduling," Naval Research Logistics (NRL), John Wiley & Sons, vol. 37(3), pages 365-381, June.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Haque, Lani & Armstrong, Michael J., 2007. "A survey of the machine interference problem," European Journal of Operational Research, Elsevier, vol. 179(2), pages 469-482, June.
    2. Abderrahmane Abbou & Viliam Makis, 2019. "Group Maintenance: A Restless Bandits Approach," INFORMS Journal on Computing, INFORMS, vol. 31(4), pages 719-731, October.
    3. Mohammad Firouz & Linda Li & Burcu B. Keskin, 2022. "Managing equipment rentals: Unreliable fleet, impatient customers, and finite commitment capacity," Production and Operations Management, Production and Operations Management Society, vol. 31(11), pages 3963-3981, November.
    4. Liling Ge & Yingjie Zhang, 2019. "Improving operational reliability of manufacturing systems by process optimization via survival signatures," Journal of Risk and Reliability, , vol. 233(3), pages 444-454, June.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Haque, Lani & Armstrong, Michael J., 2007. "A survey of the machine interference problem," European Journal of Operational Research, Elsevier, vol. 179(2), pages 469-482, June.
    2. Süleyman Demirel & Roman Kapuscinski & Man Yu, 2018. "Strategic Behavior of Suppliers in the Face of Production Disruptions," Management Science, INFORMS, vol. 64(2), pages 533-551, February.
    3. Israel David & Eitan Greenshtein & Avraham Mehrez, 1997. "A dynamic‐programming approach to continuous‐review obsolescent inventory problems," Naval Research Logistics (NRL), John Wiley & Sons, vol. 44(8), pages 757-774, December.
    4. Moshe Dror & Kenneth R. Smith & Candace Arai Yano, 2009. "Deux Chemicals Inc. Goes Just-in-Time," Interfaces, INFORMS, vol. 39(6), pages 503-515, December.
    5. Mahmut Parlar & David Perry, 1996. "Inventory models of future supply uncertainty with single and multiple suppliers," Naval Research Logistics (NRL), John Wiley & Sons, vol. 43(2), pages 191-210, March.
    6. B. Khoury, 2009. "A discrete approach to designing optimal hedging-point control policies for production-inventory systems with general stochastic behavior," Computational Management Science, Springer, vol. 6(4), pages 399-409, October.
    7. Chiu, Singa Wang & Wang, Shan-Ling & Chiu, Yuan-Shyi Peter, 2007. "Determining the optimal run time for EPQ model with scrap, rework, and stochastic breakdowns," European Journal of Operational Research, Elsevier, vol. 180(2), pages 664-676, July.
    8. B C Giri & T Dohi, 2005. "Exact formulation of stochastic EMQ model for an unreliable production system," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(5), pages 563-575, May.
    9. Jingfu Huang & Gaoke Wu & Yiju Wang, 2021. "Retailer’s Emergency Ordering Policy When Facing an Impending Supply Disruption," Sustainability, MDPI, vol. 13(13), pages 1-21, June.
    10. Chiu, Singa Wang, 2008. "Production lot size problem with failure in repair and backlogging derived without derivatives," European Journal of Operational Research, Elsevier, vol. 188(2), pages 610-615, July.
    11. Gregory A. DeCroix, 2013. "Inventory Management for an Assembly System Subject to Supply Disruptions," Management Science, INFORMS, vol. 59(9), pages 2079-2092, September.
    12. Taleizadeh, Ata Allah & Cárdenas-Barrón, Leopoldo Eduardo & Mohammadi, Babak, 2014. "A deterministic multi product single machine EPQ model with backordering, scraped products, rework and interruption in manufacturing process," International Journal of Production Economics, Elsevier, vol. 150(C), pages 9-27.
    13. Chakraborty, Tulika & Giri, B.C. & Chaudhuri, K.S., 2008. "Production lot sizing with process deterioration and machine breakdown," European Journal of Operational Research, Elsevier, vol. 185(2), pages 606-618, March.
    14. Chiu, Singa Wang & Chou, Chung-Li & Wu, Wen-Kuei, 2013. "Optimizing replenishment policy in an EPQ-based inventory model with nonconforming items and breakdown," Economic Modelling, Elsevier, vol. 35(C), pages 330-337.
    15. Fahimeh Shamsaei & Mathieu Vyve, 2017. "Solving integrated production and condition-based maintenance planning problems by MIP modeling," Flexible Services and Manufacturing Journal, Springer, vol. 29(2), pages 184-202, June.
    16. Parlar, Mahmut & Perry, David, 1995. "Analysis of a (Q, r, T) inventory policy with deterministic and random yields when future supply is uncertain," European Journal of Operational Research, Elsevier, vol. 84(2), pages 431-443, July.
    17. Harun Öztürk, 2019. "Modeling an inventory problem with random supply, inspection and machine breakdown," OPSEARCH, Springer;Operational Research Society of India, vol. 56(2), pages 497-527, June.
    18. Om Prakash & A.R. Roy & A. Goswami, 2014. "Stochastic manufacturing system with process deterioration and machine breakdown," International Journal of Systems Science, Taylor & Francis Journals, vol. 45(12), pages 2539-2551, December.
    19. Peymankar, Mahboobe & Dehghanian, Farzad & Ghiami, Yousef & Abolbashari, Mohammad Hassan, 2018. "The effects of contractual agreements on the economic production quantity model with machine breakdown," International Journal of Production Economics, Elsevier, vol. 201(C), pages 203-215.
    20. Yuan-Shyi Peter Chiu & Chih-An Katherine Lin & Huei-Hsin Chang & Victoria Chiu, 2010. "Mathematical modelling for determining economic batch size and optimal number of deliveries for EPQ model with quality assurance," Mathematical and Computer Modelling of Dynamical Systems, Taylor & Francis Journals, vol. 16(4), pages 373-388, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:inm:oropre:v:48:y:2000:i:6:p:951-964. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Chris Asher (email available below). General contact details of provider: https://edirc.repec.org/data/inforea.html .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.