IDEAS home Printed from https://ideas.repec.org/a/inm/orinte/v34y2004i2p87-96.html
   My bibliography  Save this article

Simulation Helps Maxager Shorten Its Sales Cycle

Author

Listed:
  • Srinagesh Gavirneni

    (Operations and Decision Technologies, Kelley School of Business, Indiana University, Bloomington, Indiana 47405)

  • Douglas J. Morrice

    (McCombs School of Business, University of Texas at Austin, Austin, Texas 78712)

  • Peter Mullarkey

    (NetQoS, Inc., 6504 Bridge Point Parkway, Suite 501, Austin, Texas 78730)

Abstract

We developed a simulation approach to reduce the time and cost of selling the Maxager system, a manufacturing decision-support system consisting of both hardware and software. To enable customers to understand the impact Maxager could have on their profitability, we used to perform pilot studies in which we installed our hardware, trained their people, collected data, and performed the analysis. These pilot studies lasted for three to six months and cost hundreds of thousands of dollars. To save time and money, we simulated Maxager’s data-collection systems and used the Maxager software to analyze the data. This enabled us, with some aggregate information provided by the prospective customers, to illustrate the impact Maxager could have on their systems using simulated data of their products, processes, and operating procedures without having to install our hardware. As a result, (1) we reduced sales cycles from over 12 months long to less than six months long, and (2) we reduced the cost of a sales cycle by approximately $50,000 to $100,000. We achieved these results without a drop in the success rate of the sales process.

Suggested Citation

  • Srinagesh Gavirneni & Douglas J. Morrice & Peter Mullarkey, 2004. "Simulation Helps Maxager Shorten Its Sales Cycle," Interfaces, INFORMS, vol. 34(2), pages 87-96, April.
    • Handle: RePEc:inm:orinte:v:34:y:2004:i:2:p:87-96
    DOI: 10.1287/inte.1030.0065
    as

    Download full text from publisher

    File URL: http://dx.doi.org/10.1287/inte.1030.0065
    Download Restriction: no
    File URL: https://libkey.io/10.1287/inte.1030.0065?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. George S. Fishman, 1978. "Grouping Observations in Digital Simulation," Management Science, INFORMS, vol. 24(5), pages 510-521, January.
    2. Bruce Schmeiser, 1982. "Batch Size Effects in the Analysis of Simulation Output," Operations Research, INFORMS, vol. 30(3), pages 556-568, June.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mingchang Chih, 2019. "An Insight into the Data Structure of the Dynamic Batch Means Algorithm with Binary Tree Code," Mathematics, MDPI, vol. 7(9), pages 1-8, August.
    2. Song, Wheyming T. & Chih, Mingchang, 2010. "Extended dynamic partial-overlapping batch means estimators for steady-state simulations," European Journal of Operational Research, Elsevier, vol. 203(3), pages 640-651, June.
    3. Song, Wheyming Tina & Chih, Mingchang, 2013. "Run length not required: Optimal-mse dynamic batch means estimators for steady-state simulations," European Journal of Operational Research, Elsevier, vol. 229(1), pages 114-123.
    4. Lada, Emily K. & Wilson, James R., 2006. "A wavelet-based spectral procedure for steady-state simulation analysis," European Journal of Operational Research, Elsevier, vol. 174(3), pages 1769-1801, November.
    5. Enver Yücesan, 1993. "Randomization tests for initialization bias in simulation output," Naval Research Logistics (NRL), John Wiley & Sons, vol. 40(5), pages 643-663, August.
    6. Song, Wheyming Tina, 1996. "On the estimation of optimal batch sizes in the analysis of simulation output," European Journal of Operational Research, Elsevier, vol. 88(2), pages 304-319, January.
    7. Natalie M. Steiger & James R. Wilson, 2001. "Convergence Properties of the Batch Means Method for Simulation Output Analysis," INFORMS Journal on Computing, INFORMS, vol. 13(4), pages 277-293, November.
    8. Jack P. C. Kleijnen & Susan M. Sanchez & Thomas W. Lucas & Thomas M. Cioppa, 2005. "State-of-the-Art Review: A User’s Guide to the Brave New World of Designing Simulation Experiments," INFORMS Journal on Computing, INFORMS, vol. 17(3), pages 263-289, August.
    9. David F. Muñoz & Peter W. Glynn, 2001. "Multivariate Standardized Time Series for Steady-State Simulation Output Analysis," Operations Research, INFORMS, vol. 49(3), pages 413-422, June.
    10. David Goldsman & Keebom Kang & Seong‐Hee Kim & Andrew F. Seila & Gamze Tokol, 2007. "Combining standardized time series area and Cramér–von Mises variance estimators," Naval Research Logistics (NRL), John Wiley & Sons, vol. 54(4), pages 384-396, June.
    11. Christos Alexopoulos & Nilay Tanık Argon & David Goldsman & Gamze Tokol & James R. Wilson, 2007. "Overlapping Variance Estimators for Simulation," Operations Research, INFORMS, vol. 55(6), pages 1090-1103, December.
    12. Kannan, V. R. & Ghosh, S., 1995. "Using dynamic cellular manufacturing to simplify scheduling in cell based production systems," Omega, Elsevier, vol. 23(4), pages 443-452, August.
    13. Christos Alexopoulos & David Goldsman & Gamze Tokol, 2001. "Properties of Batched Quadratic-Form Variance Parameter Estimators for Simulations," INFORMS Journal on Computing, INFORMS, vol. 13(2), pages 149-156, May.
    14. Driessen, M.A. & van Houtum, G.J. & Zijm, W.H.M. & Rustenburg, W.D., 2020. "Capacity assignment in repair shops with high material uncertainty," International Journal of Production Economics, Elsevier, vol. 221(C).
    15. S Robinson & T Alifantis & J S Edwards & J Ladbrook & A Waller, 2005. "Knowledge-based improvement: simulation and artificial intelligence for identifying and improving human decision-making in an operations system," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(8), pages 912-921, August.
    16. Logendran, Rasaratnam & Talkington, Diane, 1997. "Analysis of cellular and functional manufacturing systems in the presence of machine breakdown," International Journal of Production Economics, Elsevier, vol. 53(3), pages 239-256, December.
    17. Kenneth W. Bauer & James R. Wilson, 1992. "Control‐variate selection criteria," Naval Research Logistics (NRL), John Wiley & Sons, vol. 39(3), pages 307-321, April.
    18. Christos Alexopoulos & Nilay Tanık Argon & David Goldsman & Natalie M. Steiger & Gamze Tokol & James R. Wilson, 2007. "Efficient Computation of Overlapping Variance Estimators for Simulation," INFORMS Journal on Computing, INFORMS, vol. 19(3), pages 314-327, August.
    19. Robinson, Stewart, 2007. "A statistical process control approach to selecting a warm-up period for a discrete-event simulation," European Journal of Operational Research, Elsevier, vol. 176(1), pages 332-346, January.
    20. Karen T. Hicklin & Julie S. Ivy & James R. Wilson & Fay Cobb Payton & Meera Viswanathan & Evan R. Myers, 2019. "Simulation model of the relationship between cesarean section rates and labor duration," Health Care Management Science, Springer, vol. 22(4), pages 635-657, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:inm:orinte:v:34:y:2004:i:2:p:87-96. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Chris Asher (email available below). General contact details of provider: https://edirc.repec.org/data/inforea.html .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.