IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v9y2017i8p1381-d106985.html
   My bibliography  Save this article

Deduction of Optimum Surface Design Factors for Enhancement of Outdoor Thermal Environment in a Micro-Scale Unit

Author

Listed:
  • Sukjin Jung

    (Department of Architecture, Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan 609-735, Korea)

  • Seonghwan Yoon

    (Department of Architecture, Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan 609-735, Korea)

Abstract

To solve some of the problems associated with changing urban climates, such as the heat island effect, the exterior building skin and ground surfaces should be analyzed because they are directly exposed to the outdoor climate and have the greatest impact on energy consumption. Research is needed to identify design factors to improve the effect of a building’s skin in the outdoor summer season’s thermal environment. In this study, the current conditions of outdoor thermal environments were identified by conducting field measurements at an apartment housing complex. A simulation analysis was conducted based on cases that included different design factors for a building’s skin and ground surfaces. When the significance probability of the design factors for the surface plans for apartment buildings and surface cover was analyzed based on the Taguchi experimental design method, the window plan and surface cover plan influenced the outdoor thermal environment. Notably, the surface cover plan had the most significant impact on the outdoor thermal environment. The result of the analysis of the correlation between the design factors for an apartment complex’s surface plans and outdoor thermal environment indices showed that the window plan correlated with the entire surface temperature of building and heat island potential (HIP).

Suggested Citation

  • Sukjin Jung & Seonghwan Yoon, 2017. "Deduction of Optimum Surface Design Factors for Enhancement of Outdoor Thermal Environment in a Micro-Scale Unit," Sustainability, MDPI, vol. 9(8), pages 1-26, August.
  • Handle: RePEc:gam:jsusta:v:9:y:2017:i:8:p:1381-:d:106985
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/9/8/1381/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/9/8/1381/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Sukjin Jung & Seonghwan Yoon, 2015. "Changes in Sunlight and Outdoor Thermal Environment Conditions Based on the Layout Plan of Flat Type Apartment Houses," Energies, MDPI, vol. 8(9), pages 1-18, August.
    2. He, Jiang & Hoyano, Akira & Asawa, Takashi, 2009. "A numerical simulation tool for predicting the impact of outdoor thermal environment on building energy performance," Applied Energy, Elsevier, vol. 86(9), pages 1596-1605, September.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mengyu Zhang & Woongkyoo Bae & Jeeyeop Kim, 2019. "The Effects of the Layouts of Vegetation and Wind Flow in an Apartment Housing Complex to Mitigate Outdoor Microclimate Air Temperature," Sustainability, MDPI, vol. 11(11), pages 1-20, May.
    2. Norihiro Watanabe & Tsuyoshi Setoguchi & Kosuke Maeda & Daiki Iwakuni & Zhiming Guo & Takuya Tsutsumi, 2017. "Sustainable Block Design Process for High-Rise and High-Density Districts with Snow and Wind Simulations for Winter Cities," Sustainability, MDPI, vol. 9(11), pages 1-18, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Pisello, Anna Laura & Goretti, Michele & Cotana, Franco, 2012. "A method for assessing buildings’ energy efficiency by dynamic simulation and experimental activity," Applied Energy, Elsevier, vol. 97(C), pages 419-429.
    2. Ascione, Fabrizio & Bianco, Nicola & Rossi, Filippo de’ & Turni, Gianluca & Vanoli, Giuseppe Peter, 2012. "Different methods for the modelling of thermal bridges into energy simulation programs: Comparisons of accuracy for flat heterogeneous roofs in Italian climates," Applied Energy, Elsevier, vol. 97(C), pages 405-418.
    3. Kiluk, Sebastian, 2012. "Algorithmic acquisition of diagnostic patterns in district heating billing system," Applied Energy, Elsevier, vol. 91(1), pages 146-155.
    4. Paola Iodice & Nicola Massarotti & Alessandro Mauro, 2016. "Effects of Inhomogeneities on Heat and Mass Transport Phenomena in Thermal Bridges," Energies, MDPI, vol. 9(3), pages 1-21, February.
    5. Toparlar, Y. & Blocken, B. & Maiheu, B. & van Heijst, G.J.F., 2018. "Impact of urban microclimate on summertime building cooling demand: A parametric analysis for Antwerp, Belgium," Applied Energy, Elsevier, vol. 228(C), pages 852-872.
    6. Zhang, Xingxing & Lovati, Marco & Vigna, Ilaria & Widén, Joakim & Han, Mengjie & Gal, Csilla & Feng, Tao, 2018. "A review of urban energy systems at building cluster level incorporating renewable-energy-source (RES) envelope solutions," Applied Energy, Elsevier, vol. 230(C), pages 1034-1056.
    7. Rodrigues, Eugénio & Fernandes, Marco S. & Gomes, Álvaro & Gaspar, Adélio Rodrigues & Costa, José J., 2019. "Performance-based design of multi-story buildings for a sustainable urban environment: A case study," Renewable and Sustainable Energy Reviews, Elsevier, vol. 113(C), pages 1-1.
    8. Sorrentino, Marco & Rizzo, Gianfranco & Genova, Fernando & Gaspardone, Marco, 2010. "A model for simulation and optimal energy management of Telecom switching plants," Applied Energy, Elsevier, vol. 87(1), pages 259-267, January.
    9. Borreguero, Ana M. & Luz Sánchez, M. & Valverde, José Luis & Carmona, Manuel & Rodríguez, Juan F., 2011. "Thermal testing and numerical simulation of gypsum wallboards incorporated with different PCMs content," Applied Energy, Elsevier, vol. 88(3), pages 930-937, March.
    10. Frayssinet, Loïc & Merlier, Lucie & Kuznik, Frédéric & Hubert, Jean-Luc & Milliez, Maya & Roux, Jean-Jacques, 2018. "Modeling the heating and cooling energy demand of urban buildings at city scale," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P2), pages 2318-2327.
    11. Fonseca Diaz, Néstor, 2011. "Modeling of a hydronic ceiling system and its environment as energetic auditing tool," Applied Energy, Elsevier, vol. 88(3), pages 636-649, March.
    12. Pisello, Anna Laura & Asdrubali, Francesco, 2014. "Human-based energy retrofits in residential buildings: A cost-effective alternative to traditional physical strategies," Applied Energy, Elsevier, vol. 133(C), pages 224-235.
    13. Olofsson, Thomas & Mahlia, T.M.I., 2012. "Modeling and simulation of the energy use in an occupied residential building in cold climate," Applied Energy, Elsevier, vol. 91(1), pages 432-438.
    14. Suk-jin Jung & Seong-hwan Yoon, 2018. "Study on the Prediction and Improvement of Indoor Natural Light and Outdoor Comfort in Apartment Complexes Using Daylight Factor and Physiologically Equivalent Temperature Indices," Energies, MDPI, vol. 11(7), pages 1-19, July.
    15. Kiluk, S., 2014. "Dynamic classification system in large-scale supervision of energy efficiency in buildings," Applied Energy, Elsevier, vol. 132(C), pages 1-14.
    16. Tian, Wei & Liu, Yunliang & Heo, Yeonsook & Yan, Da & Li, Zhanyong & An, Jingjing & Yang, Song, 2016. "Relative importance of factors influencing building energy in urban environment," Energy, Elsevier, vol. 111(C), pages 237-250.
    17. Ruoning Chen & Xue-yi You, 2020. "Reduction of urban heat island and associated greenhouse gas emissions," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 25(4), pages 689-711, April.
    18. Sukjin Jung & Seonghwan Yoon, 2015. "Changes in Sunlight and Outdoor Thermal Environment Conditions Based on the Layout Plan of Flat Type Apartment Houses," Energies, MDPI, vol. 8(9), pages 1-18, August.
    19. Omar, M.N. & Taha, A.T. & Samak, A.A. & Keshek, M.H. & Gomaa, E.M. & Elsisi, S.F., 2021. "Simulation and validation model of cooling greenhouse by solar energy (P V) integrated with painting its cover and its effect on the cucumber production," Renewable Energy, Elsevier, vol. 172(C), pages 1154-1173.
    20. Verbai, Zoltán & Kocsis, Imre & Kalmár, Ferenc, 2015. "Outdoor dry bulb heating design temperatures for Hungary," Energy, Elsevier, vol. 93(P2), pages 1404-1412.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:9:y:2017:i:8:p:1381-:d:106985. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.