IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i14p10766-d1189967.html
   My bibliography  Save this article

Authorization or Outsourcing: Considering the Contrast/Assimilation Effect and Network Externality of Remanufactured Products under Government Subsidy

Author

Listed:
  • Yuqing Hu

    (College of Economics and Management, China Jiliang University, Hangzhou 310018, China)

  • Lijun Meng

    (College of Economics and Management, China Jiliang University, Hangzhou 310018, China)

  • Jingya Xue

    (College of Economics and Management, China Jiliang University, Hangzhou 310018, China)

  • Hongying Xia

    (College of Economics and Management, China Jiliang University, Hangzhou 310018, China)

Abstract

This paper examines the impact of the contrast/assimilation effect and network externality of remanufactured products on remanufacturing mode selection for original equipment manufacturers (OEMs) under government subsidy. We develop a two-period Stackelberg game model in a closed-loop supply chain (CLSC) composed of an OEM and a third-party remanufacturer (TPR) considering two remanufacturing modes: authorization remanufacturing mode and outsourcing remanufacturing mode. The results show the following: (1) The OEM prefers to select authorization when the contrast/assimilation effect and government subsidy level are both relatively low; otherwise, the OEM prefers outsourcing. The TPR always prefers the outsourcing mode. Therefore, a win–win situation between the OEM and the TPR could be achieved through OEM outsourcing remanufacturing when the government raises subsidy levels or the contrast/assimilation effect is relatively obvious. (2) The outsourcing mode is more beneficial in promoting the sales of remanufactured products and is more environmentally friendly, while the authorization mode is better in regards to consumer surplus and social welfare. (3) OEM, TPR and CLSC could benefit from network externality increasing. The stronger contrast effect (assimilation effect) is profitable to the OEM and CLSC (TPR), but hurts the TPR (OEM and CLSC). (4) Government subsidy can significantly reduce consumer spending on remanufactured products. CLSC members encroach government subsidies which are offered to consumers through pricing adjustments. The findings provide managerial implications for OEMs’ remanufacturing mode strategy in the context of the contrast/assimilation effect and network externality of remanufactured products under government subsidy.

Suggested Citation

  • Yuqing Hu & Lijun Meng & Jingya Xue & Hongying Xia, 2023. "Authorization or Outsourcing: Considering the Contrast/Assimilation Effect and Network Externality of Remanufactured Products under Government Subsidy," Sustainability, MDPI, vol. 15(14), pages 1-27, July.
    • Handle: RePEc:gam:jsusta:v:15:y:2023:i:14:p:10766-:d:1189967
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/14/10766/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/14/10766/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Zou, Zong-Bao & Wang, Jian-Jun & Deng, Gui-Shi & Chen, Haozhe, 2016. "Third-party remanufacturing mode selection: Outsourcing or authorization?," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 87(C), pages 1-19.
    2. Zhao, LiuWei & Chang, Jianwei & DU, Jianguo, 2019. "Dynamics analysis on competition between manufacturing and remanufacturing in context of government subsidies," Chaos, Solitons & Fractals, Elsevier, vol. 121(C), pages 119-128.
    3. Bo Xie & Weizi Li & Dan Zhao & Peiyan Jiang & Nikunja Mohan Modak, 2022. "Effects of Network Externalities and Recycling Channels on Closed-loop Supply Chain Operation Incorporating Consumers’ Dual Preferences," Mathematical Problems in Engineering, Hindawi, vol. 2022, pages 1-20, July.
    4. Kailing Liu & Quanxi Li & Haowei Zhang, 2022. "Analysis of the Impact of Remanufacturing Process Innovation on Closed-Loop Supply Chain from the Perspective of Government Subsidy," Sustainability, MDPI, vol. 14(18), pages 1-25, September.
    5. Liu, Zhiyong & Li, Minqiang & Kou, Jisong, 2015. "Selling information products: Sale channel selection and versioning strategy with network externality," International Journal of Production Economics, Elsevier, vol. 166(C), pages 1-10.
    6. Lei Xu & Yongjian Li & Kannan Govindan & Xiaohang Yue, 2018. "Return policy and supply chain coordination with network-externality effect," International Journal of Production Research, Taylor & Francis Journals, vol. 56(10), pages 3714-3732, May.
    7. Li, Wei & Sun, Hui & Dong, Hao & Gan, Yuqin & Koh, Lenny, 2023. "Outsourcing decision-making in global remanufacturing supply chains: The impact of tax and tariff regulations," European Journal of Operational Research, Elsevier, vol. 304(3), pages 997-1010.
    8. He, Peng & He, Yong & Xu, Henry, 2019. "Channel structure and pricing in a dual-channel closed-loop supply chain with government subsidy," International Journal of Production Economics, Elsevier, vol. 213(C), pages 108-123.
    9. Xiqiang Xia & Mengya Li & Biao Li & Hao Wang, 2021. "The Impact of Carbon Trade on Outsourcing Remanufacturing," IJERPH, MDPI, vol. 18(20), pages 1-18, October.
    10. Katz, Michael L & Shapiro, Carl, 1985. "Network Externalities, Competition, and Compatibility," American Economic Review, American Economic Association, vol. 75(3), pages 424-440, June.
    11. Yenipazarli, Arda, 2016. "Managing new and remanufactured products to mitigate environmental damage under emissions regulation," European Journal of Operational Research, Elsevier, vol. 249(1), pages 117-130.
    12. James D. Abbey & Rainer Kleber & Gilvan C. Souza & Guido Voigt, 2017. "The Role of Perceived Quality Risk in Pricing Remanufactured Products," Production and Operations Management, Production and Operations Management Society, vol. 26(1), pages 100-115, January.
    13. Chen, Jen-Yi & Dimitrov, Stanko & Pun, Hubert, 2019. "The impact of government subsidy on supply Chains’ sustainability innovation," Omega, Elsevier, vol. 86(C), pages 42-58.
    14. James D. Abbey & Margaret G. Meloy & V. Daniel R. Guide Jr. & Selin Atalay, 2015. "Remanufactured Products in Closed-Loop Supply Chains for Consumer Goods," Production and Operations Management, Production and Operations Management Society, vol. 24(3), pages 488-503, March.
    15. Jin, Minyue & Li, Gendao & Reimann, Marc, 2022. "Team of rivals: How should original equipment manufacturers cooperate with independent remanufacturers via authorisation?," European Journal of Operational Research, Elsevier, vol. 296(3), pages 837-845.
    16. Qin Zhou & Kum Fai Yuen, 2020. "Analyzing the Effect of Government Subsidy on the Development of the Remanufacturing Industry," IJERPH, MDPI, vol. 17(10), pages 1-20, May.
    17. Zhou, Qin & Meng, Chao & Yuen, Kum Fai, 2021. "Remanufacturing authorization strategy for competition among OEM, authorized remanufacturer, and unauthorized remanufacturer," International Journal of Production Economics, Elsevier, vol. 242(C).
    18. Liu, Zhuojun & Chen, Jing & Diallo, Claver & Venkatadri, Uday, 2021. "Pricing and production decisions in a dual-channel closed-loop supply chain with (re)manufacturing," International Journal of Production Economics, Elsevier, vol. 232(C).
    19. Zhang, Ling & Zhang, Zheng, 2022. "Dynamic analysis of the decision of authorized remanufacturing supply chain affected by government subsidies under cap-and-trade policies," Chaos, Solitons & Fractals, Elsevier, vol. 160(C).
    20. Yi, Yuyin & Yang, Haishen, 2017. "Wholesale pricing and evolutionary stable strategies of retailers under network externality," European Journal of Operational Research, Elsevier, vol. 259(1), pages 37-47.
    21. Wei Li & Hang Wu & Liurui Deng, 2015. "Decision-Making Based on Consumers’ Perceived Value in Different Remanufacturing Modes," Discrete Dynamics in Nature and Society, Hindawi, vol. 2015, pages 1-8, February.
    22. Hong, Xianpei & Govindan, Kannan & Xu, Lei & Du, Peng, 2017. "Quantity and collection decisions in a closed-loop supply chain with technology licensing," European Journal of Operational Research, Elsevier, vol. 256(3), pages 820-829.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yuqing Hu & Lijun Meng & Zuqing Huang, 2023. "Pricing and Sales Effort Decisions in a Closed-Loop Supply Chain Considering the Network Externality of Remanufactured Product," Sustainability, MDPI, vol. 15(7), pages 1-26, March.
    2. Zhang, Ling & Zhang, Zheng, 2022. "Dynamic analysis of the decision of authorized remanufacturing supply chain affected by government subsidies under cap-and-trade policies," Chaos, Solitons & Fractals, Elsevier, vol. 160(C).
    3. Binbin He & Haiya Cai & Yingchen Ji & Siyu Zhu, 2023. "Supply Chain Green Manufacturing and Green Marketing Strategies under Network Externality," Sustainability, MDPI, vol. 15(18), pages 1-18, September.
    4. Lijun Meng & Qiang Qiang & Zuqing Huang & Baoyou Zhang & Yuxiang Yang, 2020. "Optimal Pricing Strategy and Government Consumption Subsidy Policy in Closed-Loop Supply Chain with Third-Party Remanufacturer," Sustainability, MDPI, vol. 12(6), pages 1-29, March.
    5. Fang, Chang & Fan, Shuyi & Chi, Mingxiang & Wang, Weizhong, 2023. "The optimal remanufacturing strategy, returned quality choice and independent remanufacturers’ advantage for tackling extreme weather," International Journal of Production Economics, Elsevier, vol. 259(C).
    6. He, Qidong & Wang, Nengmin & Browning, Tyson R. & Jiang, Bin, 2022. "Competitive collection with convenience-perceived customers," European Journal of Operational Research, Elsevier, vol. 303(1), pages 239-254.
    7. Qiao, Haike & Su, Qin, 2021. "Distribution channel and licensing strategy choice considering consumer online reviews in a closed-loop supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 151(C).
    8. Ehsan Shekarian & Simme Douwe Flapper, 2021. "Analyzing the Structure of Closed-Loop Supply Chains: A Game Theory Perspective," Sustainability, MDPI, vol. 13(3), pages 1-32, January.
    9. Zongbao Zou & Cong Wang & Qinjia Zhong, 2022. "How Does Retailer-Oriented Remanufacturing Affect the OEM’s Quality Choice?," Sustainability, MDPI, vol. 14(13), pages 1-21, June.
    10. Niu, Baozhuang & Ruan, Yiyuan & Yu, Xinhu, 2024. "Purchasing new for remanufacturing: Sourcing co-opetition, tax-planning and data validation," International Journal of Production Economics, Elsevier, vol. 273(C).
    11. Yunting Feng & Yong Geng & Ge Zhao & Mengya Li, 2022. "Carbon Emission Constraint Policy in an OEM and Outsourcing Remanufacturer Supply Chain with Consumer Preferences," IJERPH, MDPI, vol. 19(8), pages 1-16, April.
    12. Kong, Junjun & Chua, Geoffrey A. & Yang, Feng, 2023. "Firms’ cooperation on recycling investments in a three-echelon reverse supply chain," International Journal of Production Economics, Elsevier, vol. 263(C).
    13. Yang, Lei & Gao, Muyi & Feng, Lipan, 2022. "Competition versus cooperation? Which is better in a remanufacturing supply chain considering blockchain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 165(C).
    14. Shuiying Zhao & Yi Xu & Conghu Liu & Fangfang Wei, 2022. "Impact of Carbon Tax and Subsidy Policies on Original Equipment Manufacturers and Remanufacturing Companies from the Perspective of Carbon Emissions," IJERPH, MDPI, vol. 19(10), pages 1-16, May.
    15. Liang Shen & Fei Lin & Yuyan Wang & Xin Su & Hua Li & Rui Zhou, 2022. "Advertising Decisions of Platform Supply Chains Considering Network Externalities and Fairness Concerns," Mathematics, MDPI, vol. 10(13), pages 1-21, July.
    16. Chen, Yuyu & Li, Bangyi & Zhang, Guoqing & Bai, Qingguo, 2020. "Quantity and collection decisions of the remanufacturing enterprise under both the take-back and carbon emission capacity regulations," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 141(C).
    17. De, Arijit & Ray, Ankita & Kundu, Tanmoy & Sheu, Jiuh-Biing, 2023. "Is it wise to compete or to collaborate? Remanufacturing business models under collective extended producer responsibility legislation," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 179(C).
    18. Biao Li & Yong Geng & Xiqiang Xia & Dan Qiao & Hao Wang, 2021. "Comparatively Analyzing the Impact of Government Subsidy and Carbon Tax Policy on Authorized Remanufacturing," IJERPH, MDPI, vol. 18(16), pages 1-18, August.
    19. Matsui, Kenji, 2023. "Dual-recycling channel reverse supply chain design of recycling platforms under acquisition price competition," International Journal of Production Economics, Elsevier, vol. 259(C).
    20. Kleber, Rainer & Reimann, Marc & Souza, Gilvan C. & Zhang, Weihua, 2020. "Two-sided competition with vertical differentiation in both acquisition and sales in remanufacturing," European Journal of Operational Research, Elsevier, vol. 284(2), pages 572-587.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:14:p:10766-:d:1189967. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.