Author
Listed:
- Mohammed Jalalah
(Promising Centre for Sensors and Electronic Devices (PCSED), Advanced Materials and Nano-Research Centre, Najran University, Najran 11001, Saudi Arabia
Electrical Engineering Department, College of Engineering, Najran University, Najran 61441, Saudi Arabia)
- Zubair Khaliq
(Department of Materials, National Textile University, Faisalabad 37610, Pakistan)
- Zulfiqar Ali
(Department of Textile Engineering, National Textile University, Faisalabad 37610, Pakistan)
- Adnan Ahmad
(Department of Textile Engineering, National Textile University, Faisalabad 37610, Pakistan)
- Muhammad Bilal Qadir
(Department of Textile Engineering, National Textile University, Faisalabad 37610, Pakistan)
- Ali Afzal
(Department of Textile Engineering, National Textile University, Faisalabad 37610, Pakistan)
- Umer Ashraf
(Department of Textile Engineering, National Textile University, Faisalabad 37610, Pakistan)
- M. Faisal
(Promising Centre for Sensors and Electronic Devices (PCSED), Advanced Materials and Nano-Research Centre, Najran University, Najran 11001, Saudi Arabia
Department of Chemistry, Faculty of Science and Arts, Najran University, Najran 11001, Saudi Arabia)
- Mabkhoot Alsaiari
(Promising Centre for Sensors and Electronic Devices (PCSED), Advanced Materials and Nano-Research Centre, Najran University, Najran 11001, Saudi Arabia
Department of Chemistry, Faculty of Science and Arts at Sharurah, Najran University, Najran 11001, Saudi Arabia)
- Muhammad Irfan
(Electrical Engineering Department, College of Engineering, Najran University, Najran 61441, Saudi Arabia)
- Saeed A. Alsareii
(Promising Centre for Sensors and Electronic Devices (PCSED), Advanced Materials and Nano-Research Centre, Najran University, Najran 11001, Saudi Arabia
Department of Surgery, College of Medicine, Najran University, Najran 11001, Saudi Arabia)
- Farid A. Harraz
(Promising Centre for Sensors and Electronic Devices (PCSED), Advanced Materials and Nano-Research Centre, Najran University, Najran 11001, Saudi Arabia
Department of Chemistry, Faculty of Science and Arts at Sharurah, Najran University, Najran 11001, Saudi Arabia)
Abstract
Owing to increased environmental awareness and the implementation of stringent governmental regulations, the demand for the valorization of natural fibers has increased in recent years. Sugarcane bagasse after juice extraction could be a potential source of natural fibers to be used in textile applications. In this paper, sugarcane bagasse is converted to textile fibers. Sugarcane fibers are extracted through alkali and H 2 O 2 treatment with varying concentrations (6, 10, 14) g/L and (8, 12, 16) g/L, respectively. To soften the fibers for textile use, extracted fibers were post-treated with a constant ratio of silicone softener (50 g/L). Treatment of sugarcane fibers with varying concentrations of alkali–H 2 O 2 significantly influenced the fiber surface morphology. Furthermore, an increase in the crystallinity of extracted fibers was observed, whereas a reduction in fiber linear density from 54.82 tex to 45.13 tex as well as moisture regain (6.1% to 5.1%) was observed as the ratio of alkali–H 2 O 2 treatment was increased. A notable improvement in overall mechanical strength was achieved upon alkali–H 2 O 2 treatment, but at a higher concentration (conc.) there was a loss of mechanical strength, and the torsional and flexural rigidity also increased significantly. Based on the results, sugarcane fibers treated with 10 g/L NaOH, 12 g/L H 2 O 2 and 50 g/L silicone softener showed the most optimum results. These sustainable fibers have the potential to be used in textile applications due to their enhanced softness, optimum moisture regain, and better mechanical properties.
Suggested Citation
Mohammed Jalalah & Zubair Khaliq & Zulfiqar Ali & Adnan Ahmad & Muhammad Bilal Qadir & Ali Afzal & Umer Ashraf & M. Faisal & Mabkhoot Alsaiari & Muhammad Irfan & Saeed A. Alsareii & Farid A. Harraz, 2022.
"Preliminary Studies on Conversion of Sugarcane Bagasse into Sustainable Fibers for Apparel Textiles,"
Sustainability, MDPI, vol. 14(24), pages 1-11, December.
Handle:
RePEc:gam:jsusta:v:14:y:2022:i:24:p:16450-:d:997762
Download full text from publisher
References listed on IDEAS
- Maria Edelira Velázquez & Omayra Beatriz Ferreiro & Diego Batista Menezes & Yendry Corrales-Ureña & José Roberto Vega-Baudrit & Juan Daniel Rivaldi, 2022.
"Nanocellulose Extracted from Paraguayan Residual Agro-Industrial Biomass: Extraction Process, Physicochemical and Morphological Characterization,"
Sustainability, MDPI, vol. 14(18), pages 1-15, September.
- Ali Faiad & Muath Alsmari & Mohamed M. Z. Ahmed & Mohamed L. Bouazizi & Bandar Alzahrani & Hussien Alrobei, 2022.
"Date Palm Tree Waste Recycling: Treatment and Processing for Potential Engineering Applications,"
Sustainability, MDPI, vol. 14(3), pages 1-21, January.
Full references (including those not matched with items on IDEAS)
Most related items
These are the items that most often cite the same works as this one and are cited by the same works as this one.
- Hend Dakhel Alhassany & Safaa Malik Abbas & Marcos Tostado-Véliz & David Vera & Salah Kamel & Francisco Jurado, 2022.
"Review of Bioenergy Potential from the Agriculture Sector in Iraq,"
Energies, MDPI, vol. 15(7), pages 1-17, April.
- Saeed Mousa & Abdullah S. Alomari & Sabrina Vantadori & Waleed H. Alhazmi & Amr A. Abd-Elhady & Hossam El-Din M. Sallam, 2022.
"Mechanical Behavior of Epoxy Reinforced by Hybrid Short Palm/Glass Fibers,"
Sustainability, MDPI, vol. 14(15), pages 1-13, August.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:24:p:16450-:d:997762. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.