IDEAS home Printed from https://ideas.repec.org/a/gam/jmathe/v11y2022i1p65-d1013805.html
   My bibliography  Save this article

Availability Optimization Decision Support Design System for Different Repairable n -Stage Mixed Systems

Author

Listed:
  • Gia-Shie Liu

    (Department of Information Management, Lunghwa University of Science and Technology, Taoyuan 33306, Taiwan)

  • Kuo-Ping Lin

    (Department of Industrial Engineering and Enterprise Information, Tunghai University, Taichung 40704, Taiwan)

Abstract

This study attempts to propose an availability optimization decision support design system for repairable n -stage mixed systems, in which different combinations of subsystems, such as parallel, standby, and k -out-of- q , are connected in series configuration. The enumeration method, tabu search, simulated annealing, non-equilibrium simulated annealing, and the modified redundancy allocation heuristic combined with a modified genetic algorithm will be proposed to solve the system availability optimization problem and further determine the appropriate system configuration design. Several simulated cases are conducted by following the procedural flow of the proposed availability optimization decision support design system to reach the optimal allocations of the component redundancy amount, the optimal repair rates, and the optimal failure rates of all subsystems to minimize the total system cost under several configuration constraints for different repairable n -stage mixed systems. Simulated results display that the proposed availability optimization decision support design system can definitely take advantage of different component redundancy system designs, including the parallel-series system, n -stage standby system, n -stage k -out-of- q system, and n -stage mixed system, to save a lot of cost and meet the high level of the system availability requirement compared to the n -stage single component series system. Additionally, the results for all proposed combined methods also show that the parallel-series system can obviously reach the same level of system availability requirement with less system total cost, in contrast to the n -stage standby system, by presuming the identical deteriorating probability for both the operating components and the standby components. The performance comparisons of five proposed combined methods for four proposed system configurations are analyzed comprehensively. It can be concluded that the performances of the modified redundancy allocation heuristic method, combined with a modified genetic algorithm on the criteria of the optimal system costs for four proposed system configurations, are not only superior to the other four combined methods, but also to the performances on the criteria of CPU running time for four proposed system configurations.

Suggested Citation

  • Gia-Shie Liu & Kuo-Ping Lin, 2022. "Availability Optimization Decision Support Design System for Different Repairable n -Stage Mixed Systems," Mathematics, MDPI, vol. 11(1), pages 1-47, December.
    • Handle: RePEc:gam:jmathe:v:11:y:2022:i:1:p:65-:d:1013805
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2227-7390/11/1/65/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2227-7390/11/1/65/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ouzineb, Mohamed & Nourelfath, Mustapha & Gendreau, Michel, 2008. "Tabu search for the redundancy allocation problem of homogenous series–parallel multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 93(8), pages 1257-1272.
    2. H. Marouani, 2021. "Optimization for the Redundancy Allocation Problem of Reliability Using an Improved Particle Swarm Optimization Algorithm," Journal of Optimization, Hindawi, vol. 2021, pages 1-9, November.
    3. Geeta Yadav & Dheeraj Joshi & Leena Gopinath & Mahendra Kumar Soni, 2022. "Reliability and Availability Optimization of Smart Microgrid Using Specific Configuration of Renewable Resources and Considering Subcomponent Faults," Energies, MDPI, vol. 15(16), pages 1-16, August.
    4. Kayedpour, Farjam & Amiri, Maghsoud & Rafizadeh, Mahmoud & Shahryari Nia, Arash, 2017. "Multi-objective redundancy allocation problem for a system with repairable components considering instantaneous availability and strategy selection," Reliability Engineering and System Safety, Elsevier, vol. 160(C), pages 11-20.
    5. Gia-Shie Liu, 2015. "Combination methods to solve the availability–redundancy optimisation problem for repairable parallel–series systems," International Journal of Systems Science, Taylor & Francis Journals, vol. 46(12), pages 2240-2257, September.
    6. Peiravi, Abdossaber & Nourelfath, Mustapha & Zanjani, Masoumeh Kazemi, 2022. "Redundancy strategies assessment and optimization of k-out-of-n systems based on Markov chains and genetic algorithms," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    7. Chiang, Cheng-Hsiung & Chen, Liang-Hsuan, 2007. "Availability allocation and multi-objective optimization for parallel-series systems," European Journal of Operational Research, Elsevier, vol. 180(3), pages 1231-1244, August.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Peiravi, Abdossaber & Nourelfath, Mustapha & Zanjani, Masoumeh Kazemi, 2022. "Universal redundancy strategy for system reliability optimization," Reliability Engineering and System Safety, Elsevier, vol. 225(C).
    2. Gholinezhad, Hadi & Zeinal Hamadani, Ali, 2017. "A new model for the redundancy allocation problem with component mixing and mixed redundancy strategy," Reliability Engineering and System Safety, Elsevier, vol. 164(C), pages 66-73.
    3. Kayedpour, Farjam & Amiri, Maghsoud & Rafizadeh, Mahmoud & Shahryari Nia, Arash, 2017. "Multi-objective redundancy allocation problem for a system with repairable components considering instantaneous availability and strategy selection," Reliability Engineering and System Safety, Elsevier, vol. 160(C), pages 11-20.
    4. Peiravi, Abdossaber & Karbasian, Mahdi & Ardakan, Mostafa Abouei & Coit, David W., 2019. "Reliability optimization of series-parallel systems with K-mixed redundancy strategy," Reliability Engineering and System Safety, Elsevier, vol. 183(C), pages 17-28.
    5. Nath, Rahul & Muhuri, Pranab K., 2024. "A novel evolutionary solution approach for many-objective reliability-redundancy allocation problem based on objective prioritization and constraint optimization," Reliability Engineering and System Safety, Elsevier, vol. 244(C).
    6. Du, Mengyu & Li, Yan-Fu, 2020. "An investigation of new local search strategies in memetic algorithm for redundancy allocation in multi-state series-parallel systems," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    7. Vahid Baradaran & Amir Hossein Hosseinian, 2020. "A bi-objective model for redundancy allocation problem in designing server farms: mathematical formulation and solution approaches," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 11(5), pages 935-952, October.
    8. Chang, Kuo-Hao & Kuo, Po-Yi, 2018. "An efficient simulation optimization method for the generalized redundancy allocation problem," European Journal of Operational Research, Elsevier, vol. 265(3), pages 1094-1101.
    9. Ardakan, Mostafa Abouei & Talkhabi, Sajjad & Juybari, Mohammad N., 2022. "Optimal activation order vs. redundancy strategies in reliability optimization problems," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    10. Zaretalab, Arash & Sharifi, Mani & Guilani, Pedram Pourkarim & Taghipour, Sharareh & Niaki, Seyed Taghi Akhavan, 2022. "A multi-objective model for optimizing the redundancy allocation, component supplier selection, and reliable activities for multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    11. Li, Chun-yang & Chen, Xun & Yi, Xiao-shan & Tao, Jun-yong, 2010. "Heterogeneous redundancy optimization for multi-state series–parallel systems subject to common cause failures," Reliability Engineering and System Safety, Elsevier, vol. 95(3), pages 202-207.
    12. Abdossaber Peiravi & Mahdi Karbasian & Mostafa Abouei Ardakan, 2018. "K-mixed strategy: A new redundancy strategy for reliability problems," Journal of Risk and Reliability, , vol. 232(1), pages 38-51, February.
    13. Nourelfath, Mustapha & Châtelet, Eric & Nahas, Nabil, 2012. "Joint redundancy and imperfect preventive maintenance optimization for series–parallel multi-state degraded systems," Reliability Engineering and System Safety, Elsevier, vol. 103(C), pages 51-60.
    14. Ling, Xiaoliang & Wei, Yinzhao & Si, Shubin, 2019. "Reliability optimization of k-out-of-n system with random selection of allocative components," Reliability Engineering and System Safety, Elsevier, vol. 186(C), pages 186-193.
    15. Liu, Zhitao & Tan, CherMing & Leng, Feng, 2015. "A reliability-based design concept for lithium-ion battery pack in electric vehicles," Reliability Engineering and System Safety, Elsevier, vol. 134(C), pages 169-177.
    16. Nourelfath, Mustapha & Nahas, Nabil & Ben-Daya, Mohamed, 2016. "Integrated preventive maintenance and production decisions for imperfect processes," Reliability Engineering and System Safety, Elsevier, vol. 148(C), pages 21-31.
    17. Pourkarim Guilani, Pedram & Sharifi, Mani & Niaki, S.T.A. & Zaretalab, Arash, 2014. "Reliability evaluation of non-reparable three-state systems using Markov model and its comparison with the UGF and the recursive methods," Reliability Engineering and System Safety, Elsevier, vol. 129(C), pages 29-35.
    18. Kartick Bhushan & Somnath Chattopadhyaya & Shubham Sharma & Kamal Sharma & Changhe Li & Yanbin Zhang & Elsayed Mohamed Tag Eldin, 2022. "Analyzing Reliability and Maintainability of Crawler Dozer BD155 Transmission Failure Using Markov Method and Total Productive Maintenance: A Novel Case Study for Improvement Productivity," Sustainability, MDPI, vol. 14(21), pages 1-17, November.
    19. Levitin, Gregory & Xing, Liudong & Haim, Hanoch Ben & Dai, Yuanshun, 2019. "Optimal structure of series system with 1-out-of-n warm standby subsystems performing operation and rescue functions," Reliability Engineering and System Safety, Elsevier, vol. 188(C), pages 523-531.
    20. Seyed Mohsen Mousavi & Najmeh Alikar & Madjid Tavana & Debora Di Caprio, 2019. "An improved particle swarm optimization model for solving homogeneous discounted series-parallel redundancy allocation problems," Journal of Intelligent Manufacturing, Springer, vol. 30(3), pages 1175-1194, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jmathe:v:11:y:2022:i:1:p:65-:d:1013805. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.