IDEAS home Printed from https://ideas.repec.org/a/gam/jmathe/v10y2022i10p1738-d819094.html
   My bibliography  Save this article

Scalable Visible Light Indoor Positioning System Using RSS

Author

Listed:
  • Carlos M. Avendaño-Lopez

    (Department of Electronics Engineering, Universidad de Guanajuato, Salamanca 36885, Mexico)

  • Rogelio Castro-Sanchez

    (Department of Electronics Engineering, Universidad de Guanajuato, Salamanca 36885, Mexico)

  • Dora L. Almanza-Ojeda

    (Department of Electronics Engineering, Universidad de Guanajuato, Salamanca 36885, Mexico)

  • Juan Gabriel Avina-Cervantes

    (Department of Electronics Engineering, Universidad de Guanajuato, Salamanca 36885, Mexico)

  • Miguel A. Gomez-Martinez

    (Department of Electrical Engineering, Universidad de Guanajuato, Salamanca 36885, Mexico)

  • Mario A. Ibarra-Manzano

    (Department of Electronics Engineering, Universidad de Guanajuato, Salamanca 36885, Mexico)

Abstract

This paper proposes a visible light positioning system that utilizes commercial Light-Emitting Diode (LED) lamps as transmitters and Silicon PIN photodiodes as receivers. The light signals are transmitted and received using Intensity Modulation and Direct Detection (IMDD). The lamps are modulated using On–Off Keying (OOK) with the Manchester code, and the medium access control is achieved by Time-Division Multiplexing (TDM). The position is estimated using trilateration based on the Received Signal Strength (RSS). The system’s scalability is accomplished by replicating primary localization cells composed of seven lamps and drawing on the neighborhood synchrony, exploiting the spatial multiplexing property of the light. A basic unit in the cell comprises three lamps forming a localization triangle; then, one primary localization cell shall consist of six triangles sharing lights among basic neighbor units. The cell prototype was implemented to prove the working principle of the system. Three estimation methods were used to compute the position: a deterministic approach based on least-squares regression, an Artificial Neural Network (ANN) per lamp, and an ANN for the complete system. The best per lamp estimator was the ANN, computing positions that reached an experimental accuracy of 2.5 cm under indoor conditions.

Suggested Citation

  • Carlos M. Avendaño-Lopez & Rogelio Castro-Sanchez & Dora L. Almanza-Ojeda & Juan Gabriel Avina-Cervantes & Miguel A. Gomez-Martinez & Mario A. Ibarra-Manzano, 2022. "Scalable Visible Light Indoor Positioning System Using RSS," Mathematics, MDPI, vol. 10(10), pages 1-21, May.
    • Handle: RePEc:gam:jmathe:v:10:y:2022:i:10:p:1738-:d:819094
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2227-7390/10/10/1738/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2227-7390/10/10/1738/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Shaikh, Faisal Karim & Zeadally, Sherali, 2016. "Energy harvesting in wireless sensor networks: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 1041-1054.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Dimitrios A. Papathanasopoulos & Konstantinos N. Giannousakis & Evangelos S. Dermatas & Epaminondas D. Mitronikas, 2021. "Vibration Monitoring for Position Sensor Fault Diagnosis in Brushless DC Motor Drives," Energies, MDPI, vol. 14(8), pages 1-24, April.
    2. Farnaz Derakhshan & Shamim Yousefi, 2019. "A review on the applications of multiagent systems in wireless sensor networks," International Journal of Distributed Sensor Networks, , vol. 15(5), pages 15501477198, May.
    3. Kilian D. Stenning & Jack C. Gartside & Luca Manneschi & Christopher T. S. Cheung & Tony Chen & Alex Vanstone & Jake Love & Holly Holder & Francesco Caravelli & Hidekazu Kurebayashi & Karin Everschor-, 2024. "Neuromorphic overparameterisation and few-shot learning in multilayer physical neural networks," Nature Communications, Nature, vol. 15(1), pages 1-15, December.
    4. Ashraf Virk, Mati-ur-Rasool & Mysorewala, Muhammad Faizan & Cheded, Lahouari & Aliyu, AbdulRahman, 2022. "Review of energy harvesting techniques in wireless sensor-based pipeline monitoring networks," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    5. Yang, Chen & Xue, RuiPu & Li, Xu & Zhang, XiaoQing & Wu, ZhenYu, 2020. "Power performance of solar energy harvesting system under typical indoor light sources," Renewable Energy, Elsevier, vol. 161(C), pages 836-845.
    6. Wang, Yilong & Yang, Zhengbao & Cao, Dengqing, 2021. "On the offset distance of rotational piezoelectric energy harvesters," Energy, Elsevier, vol. 220(C).
    7. Cao, Dong-Xing & Lu, Yi-Ming & Lai, Siu-Kai & Mao, Jia-Jia & Guo, Xiang-Ying & Shen, Yong-Jun, 2022. "A novel soft encapsulated multi-directional and multi-modal piezoelectric vibration energy harvester," Energy, Elsevier, vol. 254(PB).
    8. Young Hoo Cho & Jaehyun Park & Naehyuck Chang & Jaemin Kim, 2020. "Comparison of Cooling Methods for a Thermoelectric Generator with Forced Convection," Energies, MDPI, vol. 13(12), pages 1-19, June.
    9. Fang, Zheng & Tan, Xing & Liu, Genshuo & Zhou, Zijie & Pan, Yajia & Ahmed, Ammar & Zhang, Zutao, 2022. "A novel vibration energy harvesting system integrated with an inertial pendulum for zero-energy sensor applications in freight trains," Applied Energy, Elsevier, vol. 318(C).
    10. Liu, Qi & Qin, Weiyang & Zhou, Zhiyong & Shang, Mengjie & Zhou, Honglei, 2023. "Harvesting low-speed wind energy by bistable snap-through and amplified inertial force," Energy, Elsevier, vol. 284(C).
    11. Tan, Ting & Yan, Zhimiao & Zou, Hongxiang & Ma, Kejing & Liu, Fengrui & Zhao, Linchuan & Peng, Zhike & Zhang, Wenming, 2019. "Renewable energy harvesting and absorbing via multi-scale metamaterial systems for Internet of things," Applied Energy, Elsevier, vol. 254(C).
    12. Jijian Lian & Ou Cai & Xiaofeng Dong & Qi Jiang & Yue Zhao, 2019. "Health Monitoring and Safety Evaluation of the Offshore Wind Turbine Structure: A Review and Discussion of Future Development," Sustainability, MDPI, vol. 11(2), pages 1-29, January.
    13. Hassan Elahi & Marco Eugeni & Paolo Gaudenzi, 2018. "A Review on Mechanisms for Piezoelectric-Based Energy Harvesters," Energies, MDPI, vol. 11(7), pages 1-35, July.
    14. Wang, Zhemin & Du, Yu & Li, Tianrun & Yan, Zhimiao & Tan, Ting, 2021. "A flute-inspired broadband piezoelectric vibration energy harvesting device with mechanical intelligent design," Applied Energy, Elsevier, vol. 303(C).
    15. Liu, Feng-Rui & Zhang, Wen-Ming & Peng, Zhi-Ke & Meng, Guang, 2019. "Fork-shaped bluff body for enhancing the performance of galloping-based wind energy harvester," Energy, Elsevier, vol. 183(C), pages 92-105.
    16. Gerald K Ijemaru & Kenneth Li-Minn Ang & Jasmine KP Seng, 2022. "Wireless power transfer and energy harvesting in distributed sensor networks: Survey, opportunities, and challenges," International Journal of Distributed Sensor Networks, , vol. 18(3), pages 15501477211, March.
    17. Hu, Yili & Yi, Zhiran & Dong, Xiaoxue & Mou, Fangxiao & Tian, Yingwei & Yang, Qinghai & Yang, Bin & Liu, Jingquan, 2019. "High power density energy harvester with non-uniform cantilever structure due to high average strain distribution," Energy, Elsevier, vol. 169(C), pages 294-304.
    18. Sudhanshu Tiwari & Gaurav Kumar & Ayush Raj & Prateek & Rajeev Arya, 2020. "Water cycle algorithm perspective on energy constraints in WSN," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 11(2), pages 253-260, April.
    19. Sajib Roy & Md Humayun Kabir & Md Salauddin & Miah A. Halim, 2022. "An Electromagnetic Wind Energy Harvester Based on Rotational Magnet Pole-Pairs for Autonomous IoT Applications," Energies, MDPI, vol. 15(15), pages 1-14, August.
    20. Chris Blondia, 2021. "A queueing model for a wireless sensor node using energy harvesting," Telecommunication Systems: Modelling, Analysis, Design and Management, Springer, vol. 77(2), pages 335-349, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jmathe:v:10:y:2022:i:10:p:1738-:d:819094. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.