IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v8y2015i5p4529-4548d49874.html
   My bibliography  Save this article

Numerical Validation of a New Approach to Model Single Junction Low Concentration PV Cells under Non-Uniform Illumination

Author

Listed:
  • Hang Zhou

    (Institute of Sustainable Energy Technology, Department of Architecture and Built Environment, University of Nottingham, University Park NG7 2RD, UK)

  • Yuehong Su

    (Institute of Sustainable Energy Technology, Department of Architecture and Built Environment, University of Nottingham, University Park NG7 2RD, UK)

  • Michele Bottarelli

    (Department of Architecture, University of Ferrara, Via Quartieri 8, Ferrara 44121, Italy)

  • Marco Bortoloni

    (Department of Engineering, University of Ferrara, Via Saragat 1, Ferrara 44122, Italy)

  • Shenyi Wu

    (Institute of Sustainable Energy Technology, Department of Architecture and Built Environment, University of Nottingham, University Park NG7 2RD, UK)

Abstract

This study presents a numerical validation of a new approach to model single junction PV cell under non-uniform illumination for low-concentration solar collectors such as compound parabolic concentrators (CPC). The simulation is achieved by finite element modelling (FEM). To characterize the results, the model is simulated with five different non-uniform illumination profiles. The results indicate that increasing the non-uniformity of concentrated light will introduce more resistive losses and lead to a significant attenuation in the PV cell short-circuit current. The FEM modelling results are then used to validate the array modelling approach, in which a single junction PV cell is considered equivalent to a parallel-connected array of several cell splits. A comparison between the FEM and array modelling approaches shows good agreement. Therefore, the array modelling approach is a fast way to investigate the PV cell performance under non-uniform illumination, while the FEM approach is useful in optimizing design of fingers and bus-bars on a PV.

Suggested Citation

  • Hang Zhou & Yuehong Su & Michele Bottarelli & Marco Bortoloni & Shenyi Wu, 2015. "Numerical Validation of a New Approach to Model Single Junction Low Concentration PV Cells under Non-Uniform Illumination," Energies, MDPI, vol. 8(5), pages 1-20, May.
    • Handle: RePEc:gam:jeners:v:8:y:2015:i:5:p:4529-4548:d:49874
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/8/5/4529/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/8/5/4529/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ibrahim, Adnan & Othman, Mohd Yusof & Ruslan, Mohd Hafidz & Mat, Sohif & Sopian, Kamaruzzaman, 2011. "Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 352-365, January.
    2. Wang, Yunyun & Pei, Gang & Zhang, Longcan, 2014. "Effects of frame shadow on the PV character of a photovoltaic/thermal system," Applied Energy, Elsevier, vol. 130(C), pages 326-332.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Amri, Amun & Jiang, Zhong Tao & Pryor, Trevor & Yin, Chun-Yang & Djordjevic, Sinisa, 2014. "Developments in the synthesis of flat plate solar selective absorber materials via sol–gel methods: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 36(C), pages 316-328.
    2. Tian, Xinyi & Wang, Jun & Yuan, Shuang & Ji, Jie & Ke, Wei & Wang, Chuyao, 2023. "Investigation on the electrical performance of a curved PV roof integrated with CIGS cells for traditional Chinese houses," Energy, Elsevier, vol. 263(PC).
    3. Ulloa, Carlos & Nuñez, José M. & Lin, Chengxian & Rey, Guillermo, 2018. "AHP-based design method of a lightweight, portable and flexible air-based PV-T module for UAV shelter hangars," Renewable Energy, Elsevier, vol. 123(C), pages 767-780.
    4. Abd Elbar, Ayman Refat & Hassan, Hamdy, 2020. "An experimental work on the performance of new integration of photovoltaic panel with solar still in semi-arid climate conditions," Renewable Energy, Elsevier, vol. 146(C), pages 1429-1443.
    5. Li, Wenjia & Hao, Yong, 2017. "Efficient solar power generation combining photovoltaics and mid-/low-temperature methanol thermochemistry," Applied Energy, Elsevier, vol. 202(C), pages 377-385.
    6. Wu, Jinshun & Zhang, Xingxing & Shen, Jingchun & Wu, Yupeng & Connelly, Karen & Yang, Tong & Tang, Llewellyn & Xiao, Manxuan & Wei, Yixuan & Jiang, Ke & Chen, Chao & Xu, Peng & Wang, Hong, 2017. "A review of thermal absorbers and their integration methods for the combined solar photovoltaic/thermal (PV/T) modules," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 839-854.
    7. Abdulhamid Atia & Fatih Anayi & Min Gao, 2022. "Influence of Shading on Solar Cell Parameters and Modelling Accuracy Improvement of PV Modules with Reverse Biased Solar Cells," Energies, MDPI, vol. 15(23), pages 1-19, November.
    8. Al-Shamani, Ali Najah & Yazdi, Mohammad H. & Alghoul, M.A. & Abed, Azher M. & Ruslan, M.H. & Mat, Sohif & Sopian, K., 2014. "Nanofluids for improved efficiency in cooling solar collectors – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 38(C), pages 348-367.
    9. Pang, Wei & Cui, Yanan & Zhang, Qian & Wilson, Gregory.J. & Yan, Hui, 2020. "A comparative analysis on performances of flat plate photovoltaic/thermal collectors in view of operating media, structural designs, and climate conditions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    10. Lamnatou, Chr. & Chemisana, D., 2017. "Photovoltaic/thermal (PVT) systems: A review with emphasis on environmental issues," Renewable Energy, Elsevier, vol. 105(C), pages 270-287.
    11. Stropnik, Rok & Stritih, Uroš, 2016. "Increasing the efficiency of PV panel with the use of PCM," Renewable Energy, Elsevier, vol. 97(C), pages 671-679.
    12. Kim, Yu Jin & Entchev, Evgeuniy & Na, Sun Ik & Kang, Eun Chul & Baik, Young-Jin & Lee, Euy Joon, 2023. "Investigation of system optimization and control logic on a solar geothermal hybrid heat pump system based on integral effect test data," Energy, Elsevier, vol. 284(C).
    13. Zhang, Xingxing & Shen, Jingchun & Lu, Yan & He, Wei & Xu, Peng & Zhao, Xudong & Qiu, Zhongzhu & Zhu, Zishang & Zhou, Jinzhi & Dong, Xiaoqiang, 2015. "Active Solar Thermal Facades (ASTFs): From concept, application to research questions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 32-63.
    14. Wang, Qin & Yao, Wei & Fang, Jiakun & Ai, Xiaomeng & Wen, Jinyu & Yang, Xiaobo & Xie, Hailian & Huang, Xing, 2020. "Dynamic modeling and small signal stability analysis of distributed photovoltaic grid-connected system with large scale of panel level DC optimizers," Applied Energy, Elsevier, vol. 259(C).
    15. Yazdanifard, Farideh & Ebrahimnia-Bajestan, Ehsan & Ameri, Mehran, 2016. "Investigating the performance of a water-based photovoltaic/thermal (PV/T) collector in laminar and turbulent flow regime," Renewable Energy, Elsevier, vol. 99(C), pages 295-306.
    16. Hasan, Husam Abdulrasool & Sopian, Kamaruzzaman & Fudholi, Ahmad, 2018. "Photovoltaic thermal solar water collector designed with a jet collision system," Energy, Elsevier, vol. 161(C), pages 412-424.
    17. Francesco Calise & Massimo Dentice D'Accadia & Antonio Piacentino & Maria Vicidomini, 2015. "Thermoeconomic Optimization of a Renewable Polygeneration System Serving a Small Isolated Community," Energies, MDPI, vol. 8(2), pages 1-30, January.
    18. Tihomir Betti & Ante Kristić & Ivan Marasović & Vesna Pekić, 2024. "Accuracy of Simscape Solar Cell Block for Modeling a Partially Shaded Photovoltaic Module," Energies, MDPI, vol. 17(10), pages 1-19, May.
    19. Chen, J.F. & Zhang, L. & Dai, Y.J., 2018. "Performance analysis and multi-objective optimization of a hybrid photovoltaic/thermal collector for domestic hot water application," Energy, Elsevier, vol. 143(C), pages 500-516.
    20. Hu, Mingke & Zhao, Bin & Ao, Xianze & Zhao, Pinghui & Su, Yuehong & Pei, Gang, 2018. "Field investigation of a hybrid photovoltaic-photothermic-radiative cooling system," Applied Energy, Elsevier, vol. 231(C), pages 288-300.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:8:y:2015:i:5:p:4529-4548:d:49874. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.