IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v17y2024i5p1150-d1347889.html
   My bibliography  Save this article

Design of Sinusoidal Leading Edge for Low-Speed Axial Fans Operating under Inflow Distortion

Author

Listed:
  • Lorenzo Tieghi

    (Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, Via Eudossiana 18, 00182 Rome, Italy)

  • Giovanni Delibra

    (Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, Via Eudossiana 18, 00182 Rome, Italy)

  • Johan Van der Spuy

    (Department of Mechanical and Mechatronic Engineering, Stellenbosh University, Stellenbosch Central, Stellenbosh 7599, South Africa)

  • Alessandro Corsini

    (Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, Via Eudossiana 18, 00182 Rome, Italy)

Abstract

Axial fans may be equipped with passive flow control devices to enhance rotor efficiency or minimize noise emissions. In this regard, blade designs influenced by biomimicry, such as rotors with sinusoidal leading edges (LEs), have gained popularity in recent years. However, their design is predominantly driven by a trial-and-error approach, with limited systematic studies on the influence of rotor performance. Furthermore, their effectiveness is typically evaluated under controlled conditions that may significantly differ from operations in real installation layouts. In this work, a systematic review of the design process for sinusoidal LE axial fan rotors is provided, aiming to summarize previous design experiences. Then, a modified sinusoidal LE is designed and fitted to a 7.3 m low-speed axial fan for air-cooled condensers (ACCs). These fans operate at environmental conditions, providing a quasi-zero static pressure rise, often with inflow non-uniformities. A series of RANS computations were run to simulate the performance of the baseline fan and that of the sinusoidal leading edge, considering a real installation setup at Stellenbosh University, where the ACC is constrained between buildings and has a channel running on the ground below the fan inlet. The aim is to explore the nonbalanced inflow condition effects in both rotor geometries and to test the effect of the installation layout on fan performance. The results show that the modification to the rotor allows for a more even distribution of flow in the blade-to-blade passages with respect to the baseline geometry.

Suggested Citation

  • Lorenzo Tieghi & Giovanni Delibra & Johan Van der Spuy & Alessandro Corsini, 2024. "Design of Sinusoidal Leading Edge for Low-Speed Axial Fans Operating under Inflow Distortion," Energies, MDPI, vol. 17(5), pages 1-17, February.
    • Handle: RePEc:gam:jeners:v:17:y:2024:i:5:p:1150-:d:1347889
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/17/5/1150/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/17/5/1150/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Chen, Lei & Yang, Lijun & Du, Xiaoze & Yang, Yongping, 2016. "A novel layout of air-cooled condensers to improve thermo-flow performances," Applied Energy, Elsevier, vol. 165(C), pages 244-259.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Xiaoxiao & Gurgenci, Hal & Guan, Zhiqiang & Wang, Xurong & Duniam, Sam, 2017. "Measurements of crosswind influence on a natural draft dry cooling tower for a solar thermal power plant," Applied Energy, Elsevier, vol. 206(C), pages 1169-1183.
    2. Weijia Wang & Lei Chen & Xianwei Huang & Lijun Yang & Xiaoze Du, 2017. "Performance Recovery of Natural Draft Dry Cooling Systems by Combined Air Leading Strategies," Energies, MDPI, vol. 10(12), pages 1-18, December.
    3. Wenhui Huang & Lei Chen & Weijia Wang & Lijun Yang & Xiaoze Du, 2020. "Cooling Performance Optimization of Direct Dry Cooling System Based on Partition Adjustment of Axial Flow Fans," Energies, MDPI, vol. 13(12), pages 1-22, June.
    4. Wenhui Huang & Lei Chen & Lijun Yang & Xiaoze Du, 2021. "Energy-Saving Strategies of Axial Flow Fans for Direct Dry Cooling System," Energies, MDPI, vol. 14(11), pages 1-25, May.
    5. Li, Xiaoen & Wang, Ningling & Wang, Ligang & Yang, Yongping & Maréchal, François, 2018. "Identification of optimal operating strategy of direct air-cooling condenser for Rankine cycle based power plants," Applied Energy, Elsevier, vol. 209(C), pages 153-166.
    6. Xianwei Huang & Lin Chen & Lijun Yang & Xiaoze Du & Yongping Yang, 2019. "Cooling Performance Enhancement of Air-Cooled Condensers by Guiding Air Flow," Energies, MDPI, vol. 12(18), pages 1-28, September.
    7. Tarun Kumar Aseri & Chandan Sharma & Tara C. Kandpal, 2022. "Condenser cooling technologies for concentrating solar power plants: a review," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(4), pages 4511-4565, April.
    8. Yonghong Guo & Huimin Wei & Xiaoru Yang & Weijia Wang & Xiaoze Du & Lijun Yang, 2018. "Impacts of Water Flow Rate on Freezing Prevention of Air-Cooled Heat Exchangers in Power Plants," Energies, MDPI, vol. 11(1), pages 1-15, January.
    9. Weiming Ni & Zhihua Ge & Lijun Yang & Xiaoze Du, 2019. "Piping-Main Scheme for Condensers against the Adverse Impact of Environmental Conditions on Air-Cooled Thermal Power Units," Energies, MDPI, vol. 13(1), pages 1-17, December.
    10. O’Donovan, Alan & Grimes, Ronan & Sikora, Paul, 2019. "Enhanced performance of air-cooled thermal power plants using low temperature thermal storage," Applied Energy, Elsevier, vol. 250(C), pages 1673-1685.
    11. Wang, Weiliang & Zhang, Hai & Li, Zheng & Lv, Junfu & Ni, Weidou & Li, Yongsheng, 2016. "Adoption of enclosure and windbreaks to prevent the degradation of the cooling performance for a natural draft dry cooling tower under crosswind conditions," Energy, Elsevier, vol. 116(P2), pages 1360-1369.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:5:p:1150-:d:1347889. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.