IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i1p476-d1022321.html
   My bibliography  Save this article

Numerical Study on Flow-Melt Characteristics of Ice Slurry in Horizontal Straight Pipe with a Local Large Heat Flux Segment

Author

Listed:
  • Fushou Xie

    (Institute of Refrigeration and Cryogenic Engineering, Xi’an Jiaotong University, Xi’an 710049, China
    State Key Laboratory of Technologies in Space Cryogenic Propellants, Beijing 100028, China)

  • Wan Guo

    (Institute of Refrigeration and Cryogenic Engineering, Xi’an Jiaotong University, Xi’an 710049, China)

  • Yuhao Zhu

    (Institute of Refrigeration and Cryogenic Engineering, Xi’an Jiaotong University, Xi’an 710049, China)

Abstract

Ice slurry is a high energy density coolant with excellent flow, phase change, and thermophysical properties. In order to investigate the recovery of ice slurry flowing through a local large heat flux segment, a 3D Eulerian-Eulerian model based on the granular kinetic theory considering the flow and melting phase change of ice slurry is developed. Sensitivity analysis of interphase forces is carried out. A comparison of the pressure drop, solid phase velocity, and heat transfer coefficient with empirical data is carried out, respectively. The calculated results are in good agreement with the experimental results, indicating that the numerical model could accurately describe the flow and melting characteristics. Thermophysical field distributions, the axial variation of ice volume fraction (IVF), recovery curve, the average heat transfer coefficient, as well as the re-uniformization length are obtained. After passing through local large heat flux segment, due to shear stress action, the IVF and the particle uniformity of the cross section have recovery characteristics. The gradient of the recovery curve decreases with increasing inlet IVF as well as with increasing Reynolds number. After the local large heat flux increases to a certain value, its effect on the recovery curve of the ice slurry is small. The re-uniformization length increases as the local large heat flux increases. The average heat transfer coefficient of local large heat flux segment increases due to damage of the boundary layer. These results can provide a theoretical basis for the design of ice slurry systems in practical application.

Suggested Citation

  • Fushou Xie & Wan Guo & Yuhao Zhu, 2023. "Numerical Study on Flow-Melt Characteristics of Ice Slurry in Horizontal Straight Pipe with a Local Large Heat Flux Segment," Energies, MDPI, vol. 16(1), pages 1-21, January.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:1:p:476-:d:1022321
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/1/476/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/1/476/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ma, Fei & Zhang, Peng, 2020. "A review of thermo-fluidic performance and application of shellless phase change slurry: Part 2 – Flow and heat transfer characteristics," Energy, Elsevier, vol. 192(C).
    2. Ma, Fei & Zhang, Peng, 2019. "A review of thermo-fluidic performance and application of shellless phase change slurry: Part 1 – Preparations, properties and applications," Energy, Elsevier, vol. 189(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Emiliano Borri & Nan Hua & Adriano Sciacovelli & Dawei Wu & Yulong Ding & Yongliang Li & Vincenza Brancato & Yannan Zhang & Andrea Frazzica & Wenguang Li & Zhibin Yu & Yanio E. Milian & Svetlana Ushak, 2022. "Phase Change Slurries for Cooling and Storage: An Overview of Research Trends and Gaps," Energies, MDPI, vol. 15(19), pages 1-17, September.
    2. Yang, Kairan & Guo, Weimin & Zhang, Peng, 2024. "Cold energy transport and release characteristics of CO2+TBAB hydrate slurry flow with hydrate dissociation," Energy, Elsevier, vol. 294(C).
    3. Ma, Fei & Zhang, Peng, 2020. "A review of thermo-fluidic performance and application of shellless phase change slurry: Part 2 – Flow and heat transfer characteristics," Energy, Elsevier, vol. 192(C).
    4. Shi, Quanlin & Qin, Botao & Hao, Yinghao & Li, Hongbiao, 2022. "Experimental investigation of the flow and extinguishment characteristics of gel-stabilized foam used to control coal fire," Energy, Elsevier, vol. 247(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:1:p:476-:d:1022321. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.