IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i20p7792-d949056.html
   My bibliography  Save this article

Aerogel Product Applications for High-Temperature Thermal Insulation

Author

Listed:
  • Alexander V. Fedyukhin

    (Energy Efficiency and Hydrogen Technology Department, Moscow Power Engineering Institute, National Research University, 111250 Moscow, Russia)

  • Konstantin V. Strogonov

    (Energy Efficiency and Hydrogen Technology Department, Moscow Power Engineering Institute, National Research University, 111250 Moscow, Russia)

  • Olga V. Soloveva

    (Institute of Heat Power Engineering, Kazan State Power Engineering University, 420066 Kazan, Russia)

  • Sergei A. Solovev

    (Institute of Digital Technologies and Economics, Kazan State Power Engineering University, 420066 Kazan, Russia)

  • Irina G. Akhmetova

    (Institute of Digital Technologies and Economics, Kazan State Power Engineering University, 420066 Kazan, Russia)

  • Umberto Berardi

    (Department of Architectural Science, Toronto Metropolitan University, Toronto, ON M5B 2K3, Canada)

  • Mark D. Zaitsev

    (Energy Efficiency and Hydrogen Technology Department, Moscow Power Engineering Institute, National Research University, 111250 Moscow, Russia)

  • Daniil V. Grigorev

    (Energy Efficiency and Hydrogen Technology Department, Moscow Power Engineering Institute, National Research University, 111250 Moscow, Russia)

Abstract

This paper presents the results of theoretical and experimental studies to determine the optimal thickness of thermal insulation from basalt fiber and aerogel products for pipelines at temperatures of 300 and 600 °C. We carried out a comparison of the key thermophysical characteristics of the claimed heat-insulating materials. We performed a thermal imaging survey of the furnace chimney, insulated with basalt fiber and aerogel, while controlling the temperature of the flue gases by establishing the required ratio of the flow rate of natural gas and oxidizer. The temperature gradient along the thickness of the thermal insulation was obtained using a numerical tool developed in ANSYS. The results show that aerogel surpasses basalt fiber in all key thermophysical characteristics. At the same time, the only barrier to widespread industrial production and use of aerogel in the high-temperature thermal insulation segment is its market cost, which is still several times higher than that of basalt fiber in terms of an equivalent performance.

Suggested Citation

  • Alexander V. Fedyukhin & Konstantin V. Strogonov & Olga V. Soloveva & Sergei A. Solovev & Irina G. Akhmetova & Umberto Berardi & Mark D. Zaitsev & Daniil V. Grigorev, 2022. "Aerogel Product Applications for High-Temperature Thermal Insulation," Energies, MDPI, vol. 15(20), pages 1-15, October.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:20:p:7792-:d:949056
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/20/7792/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/20/7792/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Yuri Vankov & Elvira Bazukova & Dmitry Emelyanov & Alexander Fedyukhin & Olga Afanaseva & Irina Akhmetova & Umberto Berardi, 2022. "Experimental Assessment of the Thermal Conductivity of Basalt Fibres at High Temperatures," Energies, MDPI, vol. 15(8), pages 1-11, April.
    2. Yanhu, Mu & Guoyu, Li & Wei, Ma & Zhengmin, Song & Zhiwei, Zhou & Wang, Fei, 2020. "Rapid permafrost thaw induced by heat loss from a buried warm-oil pipeline and a new mitigation measure combining seasonal air-cooled embankment and pipe insulation," Energy, Elsevier, vol. 203(C).
    3. Berardi, Umberto & Nosrati, Roya Hamideh, 2018. "Long-term thermal conductivity of aerogel-enhanced insulating materials under different laboratory aging conditions," Energy, Elsevier, vol. 147(C), pages 1188-1202.
    4. Berardi, Umberto, 2019. "The impact of aging and environmental conditions on the effective thermal conductivity of several foam materials," Energy, Elsevier, vol. 182(C), pages 777-794.
    5. Yang, Jiangming & Wu, Huijun & Xu, Xinhua & Huang, Gongsheng & Xu, Tao & Guo, Sitong & Liang, Yuying, 2019. "Numerical and experimental study on the thermal performance of aerogel insulating panels for building energy efficiency," Renewable Energy, Elsevier, vol. 138(C), pages 445-457.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Guo, Haijin & Cai, Shanshan & Li, Kun & Liu, Zhongming & Xia, Lizhi & Xiong, Jiazhuang, 2020. "Simultaneous test and visual identification of heat and moisture transport in several types of thermal insulation," Energy, Elsevier, vol. 197(C).
    2. Zhou, Yuekuan & Zheng, Siqian, 2020. "Stochastic uncertainty-based optimisation on an aerogel glazing building in China using supervised learning surrogate model and a heuristic optimisation algorithm," Renewable Energy, Elsevier, vol. 155(C), pages 810-826.
    3. Zhou, Yuekuan & Zheng, Siqian, 2020. "Uncertainty study on thermal and energy performances of a deterministic parameters based optimal aerogel glazing system using machine-learning method," Energy, Elsevier, vol. 193(C).
    4. Cao, Yapeng & Li, Guoyu & Ma, Wei & Chen, Dun & Shang, Yunhu & Wu, Gang & Gao, Kai & Ying, Sai, 2023. "Permafrost degradation induced by warm-oil pipelines and analytical results of thermosyphon-based thawing mitigation," Energy, Elsevier, vol. 269(C).
    5. Cai, Shanshan & Guo, Haijin & Zhang, Boxiong & Xu, Guowen & Li, Kun & Xia, Lizhi, 2020. "Multi-scale simulation study on the hygrothermal behavior of closed-cell thermal insulation," Energy, Elsevier, vol. 196(C).
    6. Zhou, Yuekuan & Zheng, Siqian, 2020. "Climate adaptive optimal design of an aerogel glazing system with the integration of a heuristic teaching-learning-based algorithm in machine learning-based optimization," Renewable Energy, Elsevier, vol. 153(C), pages 375-391.
    7. Li, Xueling & Li, Renfu & Chang, Huawei & Zeng, Lijian & Xi, Zhaojun & Li, Yichao, 2022. "Numerical simulation of a cavity receiver enhanced with transparent aerogel for parabolic dish solar power generation," Energy, Elsevier, vol. 246(C).
    8. M. M. Sarafraz & Alireza Dareh Baghi & Mohammad Reza Safaei & Arturo S. Leon & R. Ghomashchi & Marjan Goodarzi & Cheng-Xian Lin, 2019. "Assessment of Iron Oxide (III)–Therminol 66 Nanofluid as a Novel Working Fluid in a Convective Radiator Heating System for Buildings," Energies, MDPI, vol. 12(22), pages 1-13, November.
    9. Yang, Jianming & Lin, Zhongqi & Wu, Huijun & Chen, Qingchun & Xu, Xinhua & Huang, Gongsheng & Fan, Liseng & Shen, Xujun & Gan, Keming, 2020. "Inverse optimization of building thermal resistance and capacitance for minimizing air conditioning loads," Renewable Energy, Elsevier, vol. 148(C), pages 975-986.
    10. Davide Del Curto & Valentina Cinieri, 2020. "Aerogel-Based Plasters and Energy Efficiency of Historic Buildings. Literature Review and Guidelines for Manufacturing Specimens Destined for Thermal Tests," Sustainability, MDPI, vol. 12(22), pages 1-23, November.
    11. Qu, Ke & Chen, Xiangjie & Wang, Yixin & Calautit, John & Riffat, Saffa & Cui, Xin, 2021. "Comprehensive energy, economic and thermal comfort assessments for the passive energy retrofit of historical buildings - A case study of a late nineteenth-century Victorian house renovation in the UK," Energy, Elsevier, vol. 220(C).
    12. Zhang, Chong & Wang, Jinbo & Li, Liao & Gang, Wenjie, 2019. "Dynamic thermal performance and parametric analysis of a heat recovery building envelope based on air-permeable porous materials," Energy, Elsevier, vol. 189(C).
    13. Manuela Neri & Mariagrazia Pilotelli & Marco Traversi & Elisa Levi & Edoardo Alessio Piana & Mariasole Bannó & Eva Cuerva & Pablo Pujadas & Alfredo Guardo, 2021. "Conversion of End-of-Life Household Materials into Building Insulating Low-Cost Solutions for the Development of Vulnerable Contexts: Review and Outlook towards a Circular and Sustainable Economy," Sustainability, MDPI, vol. 13(8), pages 1-21, April.
    14. Cao, Yapeng & Li, Guoyu & Ma, Wei & Wu, Gang & Chen, Zhixiang & Wang, Buxiang & Gao, Kai & Chen, Dun & Du, Qingsong & Jing, Hongyuan & Zhang, Zhenrong, 2024. "Thaw bulb formation surrounding warm-oil pipelines and evaluation of the cooling performance of a new air convection pipeline embankment structure," Energy, Elsevier, vol. 293(C).
    15. Wang, Yingying & Huang, Jinjin & Wang, Dengjia & Liu, Yanfeng & Zhao, Zejiao & Liu, Jiaping, 2019. "Experimental investigation on thermal conductivity of aerogel-incorporated concrete under various hygrothermal environment," Energy, Elsevier, vol. 188(C).
    16. Zhou, Yuekuan, 2022. "A multi-stage supervised learning optimisation approach on an aerogel glazing system with stochastic uncertainty," Energy, Elsevier, vol. 258(C).
    17. Ahmad Taki & Anastasiya Zakharanka, 2023. "The Effect of Degradation on Cold Climate Building Energy Performance: A Comparison with Hot Climate Buildings," Sustainability, MDPI, vol. 15(8), pages 1-38, April.
    18. Yang, Jianming & Zhuang, Haojie & Liang, Yuying & Cen, Jian & Zhang, Xianyong & Li, Li & Li, Peng & Qiu, Runlong, 2024. "A novel vacuum-photovoltaic glazing integrated thermoelectric cooler/warmer for environmental adaptation: thermal performance modelling," Renewable Energy, Elsevier, vol. 229(C).
    19. Zhou, Yuekuan & Zheng, Siqian, 2024. "A co-simulated material-component-system-district framework for climate-adaption and sustainability transition," Renewable and Sustainable Energy Reviews, Elsevier, vol. 192(C).
    20. Sara Dias & António Tadeu & Amílcar Ramalho & Michael Brett & Filipe Pedro, 2022. "Thermal and Mechanical Characterisation of Sandwich Core Materials for Climatic Chamber Shells Subjected to High Temperatures," Energies, MDPI, vol. 15(6), pages 1-18, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:20:p:7792-:d:949056. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.