Author
Listed:
- Mingbiao Chen
(Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
Key Laboratory of Renewable Energy, Chinese Academy of Sciences, Guangzhou 510640, China
Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou 510640, China
University of Chinese Academy of Sciences, Beijing 100049, China)
- Dekun Fu
(Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
Key Laboratory of Renewable Energy, Chinese Academy of Sciences, Guangzhou 510640, China
Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou 510640, China
Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230027, China)
- Wenji Song
(Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
Key Laboratory of Renewable Energy, Chinese Academy of Sciences, Guangzhou 510640, China
Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou 510640, China)
- Ziping Feng
(Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
Key Laboratory of Renewable Energy, Chinese Academy of Sciences, Guangzhou 510640, China
Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou 510640, China
University of Chinese Academy of Sciences, Beijing 100049, China)
Abstract
Ice slurry is widely used in the field of ice storage air conditioning, district cooling, seafood preservation, and milk processing. Ice generation using supercooled water is efficient, and the system structure is compact. However, a secondary refrigerant cycle is usually used in order to control the wall temperature and to prevent the “ice blocking” problem. Therefore, an ice generation system using supercooled water with a directed evaporating method is proposed and fabricated in order to improve the system performance, which is tested in the experiment. Then, two calculation methods are used to study the performance of entire ice generation system. We concluded that: (1) The system could run steady without “ice blocking” in the condition where the supercooled water temperature was higher than 271.7 K and the velocity was more than 2.1 m/s. The entire system COP could reach 1.6 when the condenser temperature was about 319 K. (2) The system COP could be improved by about 20% if the compressor output power was based on the theoretical refrigerant cycle. The system COP could reach about 2.5 if the proportion of extra power was 3% and the condenser temperature was 308 K. (3) The system COP with a directed evaporating method was about 14% higher than that with an indirected evaporating method. (4) An orthogonal test was built to quantify the influence of different critical parameters. The influence of factors on the system COP were as follows: condenser temperature > water flow > adiabatic compressibility > refrigerant. This work provided a good look at the performance of an ice generation system using supercooled water with a directed evaporating method. It can play an important role in guiding the design of a system of ice generation using supercooled water.
Suggested Citation
Mingbiao Chen & Dekun Fu & Wenji Song & Ziping Feng, 2021.
"Performance of Ice Generation System Using Supercooled Water with a Directed Evaporating Method,"
Energies, MDPI, vol. 14(21), pages 1-14, October.
Handle:
RePEc:gam:jeners:v:14:y:2021:i:21:p:7021-:d:665472
Download full text from publisher
Citations
Citations are extracted by the
CitEc Project, subscribe to its
RSS feed for this item.
Cited by:
- Lei Fang & Yujie Wang, 2022.
"Exploring Application of Ice Source Heat Pump Technology in Solar Heating System for Space Heating,"
Energies, MDPI, vol. 15(11), pages 1-11, May.
- Hongguang Zhang & Tanghan Wu & Lei Tang & Ziye Ling & Zhengguo Zhang & Xiaoming Fang, 2022.
"Preparation and Thermal Model of Tetradecane/Expanded Graphite and A Spiral Wavy Plate Cold Storage Tank,"
Energies, MDPI, vol. 15(24), pages 1-13, December.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:21:p:7021-:d:665472. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.