IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i9p2313-d354596.html
   My bibliography  Save this article

Nucleate Pool Boiling Heat Transfer from High-Flux Tube with Dielectric Fluid HFE-7200

Author

Listed:
  • Abhishek Kumar

    (Department of Mechanical Engineering, National Chiao Tung University, Hsinchu 300, Taiwan)

  • Kuo-Shu Hung

    (Green Energy & Environment Research Laboratories, Industrial Technology Research Institute, Zhudong 310, Taiwan)

  • Chi-Chuan Wang

    (Department of Mechanical Engineering, National Chiao Tung University, Hsinchu 300, Taiwan)

Abstract

In the present experimental study, nucleate pool boiling heat transfer measurements of two high-flux tubes (sample A and sample B) were conducted at atmospheric pressure with HFE-7200 as the working fluid. Both high-flux tubes were made from a sintered Cu-Ni (high-flux) alloy powder. The porous high-flux surface was coated inside the test tube and it is tested within the heat flux ranging from 2.6 to 86 kW/m 2 . The major difference between sample A and sample B was the coating thickness, where sample B (0.6 mm) was much larger than that of sample A (0.07 mm). Both tubes showed about three times enhancement in heat transfer coefficient (HTC) when compared to plain tube. Even though sample B contained a higher HTC than sample A, it also revealed a faster level-off phenomenon regarding the HTC vs. wall superheat. The major parameter which characterizes the boiling performance of high-flux tube was the ratio of coating thickness to pore diameter which also yielded different trends upon HTC vs. wall superheat amid sample A and B. It was found that the porous based Nishikawa correlation can well predict the performance of sample A but not sample B. This is because the ratio of coating thickness to pore diameter is far outside the applicable range of the Nishikawa correlation. Hence, a modified Nishikawa correlation is proposed. The predicted capability of the proposed modified Nishikawa correlation against sample A and sample for HTC was within ±28% deviation. The standard mean deviation of the Nishikawa correlation with experimental data for sample A and sample B was 0.302 (12.48%) and 5.64 (73%), respectively.

Suggested Citation

  • Abhishek Kumar & Kuo-Shu Hung & Chi-Chuan Wang, 2020. "Nucleate Pool Boiling Heat Transfer from High-Flux Tube with Dielectric Fluid HFE-7200," Energies, MDPI, vol. 13(9), pages 1-16, May.
  • Handle: RePEc:gam:jeners:v:13:y:2020:i:9:p:2313-:d:354596
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/9/2313/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/13/9/2313/
    Download Restriction: no
    ---><---

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Uzair Sajjad & Imtiyaz Hussain & Muhammad Sultan & Sadaf Mehdi & Chi-Chuan Wang & Kashif Rasool & Sayed M. Saleh & Ashraf Y. Elnaggar & Enas E. Hussein, 2021. "Determining the Factors Affecting the Boiling Heat Transfer Coefficient of Sintered Coated Porous Surfaces," Sustainability, MDPI, vol. 13(22), pages 1-19, November.
    2. Hesam Moghadasi & Navid Malekian & Hamid Saffari & Amir Mirza Gheitaghy & Guo Qi Zhang, 2020. "Recent Advances in the Critical Heat Flux Amelioration of Pool Boiling Surfaces Using Metal Oxide Nanoparticle Deposition," Energies, MDPI, vol. 13(15), pages 1-49, August.
    3. Denis Kuznetsov & Aleksandr Pavlenko, 2022. "Heat Transfer during Nitrogen Boiling on Surfaces Modified by Microarc Oxidation," Energies, MDPI, vol. 15(16), pages 1-14, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:9:p:2313-:d:354596. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.