IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v29y2004i9p1421-1430.html
   My bibliography  Save this article

Performance of a non-metallic unglazed solar water heater with integrated storage system

Author

Listed:
  • Sopian, K.
  • Syahri, M.
  • Abdullah, S.
  • Othman, M.Y.
  • Yatim, B.

Abstract

The performance of a new design of non-metallic unglazed solar water heater integrated with a storage system has been studied. In this system, the collector and storage were installed in one unit. All parts of the system have been fabricated from fiberglass reinforced polyester (GFRP) using a special resin composition that provides good thermal conductivity and absorptivity. The storage tank has a capacity of 329 l. The design of the storage system was sandwich construction, with the core material made out of polyurethane foam, which combines stiffness and lightness of structure with very good thermal insulation. The width and length of the absorber plat were 1.4 and 1.8 m, respectively. The performance of the system has been investigated by two methods. In the first method, the storage tank was filled up with water the night before the test. The tank was then drained during the night, refilled and made ready for the next day’s test. The tests were repeated under varied environmental conditions for several days. The maximum water temperature in the storage tank of 63 °C has been achieved for a clear day operation at an average solar radiation level of 700 W m−2 and ambient temperature of 30 °C. The decrease of water temperature with and without the thermal diode is 10 and 20 °C, respectively. In the second method, the testing was of the same way, but in this case without draw-off or draining of the hot water from the storage tank. All data readings were recorded from sunrise to sunset over the same period. The temperature was recorded for several days and ranges of 60–63 °C were obtained in the storage tank. A system efficiency of 45% was achieved at an average solar radiation level of 635 W m−2 and ambient temperature of 31 °C.

Suggested Citation

  • Sopian, K. & Syahri, M. & Abdullah, S. & Othman, M.Y. & Yatim, B., 2004. "Performance of a non-metallic unglazed solar water heater with integrated storage system," Renewable Energy, Elsevier, vol. 29(9), pages 1421-1430.
    • Handle: RePEc:eee:renene:v:29:y:2004:i:9:p:1421-1430
    DOI: 10.1016/j.renene.2004.01.002
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148104000138
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2004.01.002?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ruth M. Saint & Céline Garnier & Francesco Pomponi & John Currie, 2018. "Thermal Performance through Heat Retention in Integrated Collector-Storage Solar Water Heaters: A Review," Energies, MDPI, vol. 11(6), pages 1-26, June.
    2. Srinivas, Morapakala, 2011. "Domestic solar hot water systems: Developments, evaluations and essentials for “viability” with a special reference to India," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3850-3861.
    3. Othman, M.Y. & Hamid, S.A. & Tabook, M.A.S. & Sopian, K. & Roslan, M.H. & Ibarahim, Z., 2016. "Performance analysis of PV/T Combi with water and air heating system: An experimental study," Renewable Energy, Elsevier, vol. 86(C), pages 716-722.
    4. Abdul Hamid, Suhaila & Yusof Othman, Mohd & Sopian, Kamaruzzaman & Zaidi, Saleem H., 2014. "An overview of photovoltaic thermal combination (PV/T combi) technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 38(C), pages 212-222.
    5. Singh, Ramkishore & Lazarus, Ian J. & Souliotis, Manolis, 2016. "Recent developments in integrated collector storage (ICS) solar water heaters: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 270-298.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:29:y:2004:i:9:p:1421-1430. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.