IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v28y2003i3p331-344.html
   My bibliography  Save this article

The impact of optical and thermal properties on the performance of flat plate solar collectors

Author

Listed:
  • Hellstrom, B
  • Adsten, M
  • Nostell, P
  • Karlsson, B
  • Wackelgard, E

Abstract

The impact of the optical properties on the annual performance of flat plate collectors in a Swedish climate has been estimated with the MINSUN program. The collector parameters were determined with a theoretically based calculation program verified from laboratory measurements. The importance of changes in solar absorptance and thermal emittance of the absorber, the addition of a teflon film or a teflon honeycomb, antireflection treatment of the cover glazing and combinations of these improvements were investigated. The results show that several improvements can be achieved for solar thermal absorbers. A combined increase in absorptance from 0.95 to 0.97 and a decrease in emittance from 0.10 to 0.05 increase the annual performance with 6.7% at 50 °C operating temperature. The increase in performance by installing a teflon film as second glazing was estimated to 5.6% at 50 °C. If instead a teflon honeycomb is installed, a twice as high performance increase is obtained, 12.1%. Antireflection treatment of the cover glazing increases the annual output with 6.5% at 50 °C. A combination of absorber improvements together with a teflon honeycomb and an antireflection treated glazing results in a total increase of 24.6% at 50 °C. Including external booster reflectors increases the expected annual output at 50 °C to 19.9–29.4% depending on reflector material.

Suggested Citation

  • Hellstrom, B & Adsten, M & Nostell, P & Karlsson, B & Wackelgard, E, 2003. "The impact of optical and thermal properties on the performance of flat plate solar collectors," Renewable Energy, Elsevier, vol. 28(3), pages 331-344.
    • Handle: RePEc:eee:renene:v:28:y:2003:i:3:p:331-344
    DOI: 10.1016/S0960-1481(02)00040-X
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S096014810200040X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/S0960-1481(02)00040-X?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Bazdidi-Tehrani, Farzad & Khabazipur, Arash & Vasefi, Seyed Iman, 2018. "Flow and heat transfer analysis of TiO2/water nanofluid in a ribbed flat-plate solar collector," Renewable Energy, Elsevier, vol. 122(C), pages 406-418.
    2. Cruz-Peragon, F. & Palomar, J.M. & Casanova, P.J. & Dorado, M.P. & Manzano-Agugliaro, F., 2012. "Characterization of solar flat plate collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(3), pages 1709-1720.
    3. Tian, Y. & Zhao, C.Y., 2013. "A review of solar collectors and thermal energy storage in solar thermal applications," Applied Energy, Elsevier, vol. 104(C), pages 538-553.
    4. Javadi, F.S. & Saidur, R. & Kamalisarvestani, M., 2013. "Investigating performance improvement of solar collectors by using nanofluids," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 232-245.
    5. Zhang, Xingxing & Shen, Jingchun & Lu, Yan & He, Wei & Xu, Peng & Zhao, Xudong & Qiu, Zhongzhu & Zhu, Zishang & Zhou, Jinzhi & Dong, Xiaoqiang, 2015. "Active Solar Thermal Facades (ASTFs): From concept, application to research questions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 32-63.
    6. Razak, A.A. & Majid, Z.A.A. & Azmi, W.H. & Ruslan, M.H. & Choobchian, Sh. & Najafi, G. & Sopian, K., 2016. "Review on matrix thermal absorber designs for solar air collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 64(C), pages 682-693.
    7. Tanaka, Hiroshi, 2011. "Solar thermal collector augmented by flat plate booster reflector: Optimum inclination of collector and reflector," Applied Energy, Elsevier, vol. 88(4), pages 1395-1404, April.
    8. Sudhir Kumar Pathak & Tagamud Tazmeen & K. Chopra & V. V. Tyagi & Sanjeev Anand & Ammar M. Abdulateef & A. K. Pandey, 2023. "Sustainable Energy Progress via Integration of Thermal Energy Storage and Other Performance Enhancement Strategies in FPCs: A Synergistic Review," Sustainability, MDPI, vol. 15(18), pages 1-37, September.
    9. Nikolić, N. & Lukić, N., 2013. "A mathematical model for determining the optimal reflector position of a double exposure flat-plate solar collector," Renewable Energy, Elsevier, vol. 51(C), pages 292-301.
    10. Hossain, M.S. & Pandey, A.K. & Selvaraj, Jeyraj & Rahim, Nasrudin Abd & Islam, M.M. & Tyagi, V.V., 2019. "Two side serpentine flow based photovoltaic-thermal-phase change materials (PVT-PCM) system: Energy, exergy and economic analysis," Renewable Energy, Elsevier, vol. 136(C), pages 1320-1336.
    11. Shukla, Ruchi & Sumathy, K. & Erickson, Phillip & Gong, Jiawei, 2013. "Recent advances in the solar water heating systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 173-190.
    12. Korres, Dimitrios & Tzivanidis, Christos, 2018. "A new mini-CPC with a U-type evacuated tube under thermal and optical investigation," Renewable Energy, Elsevier, vol. 128(PB), pages 529-540.
    13. Saffarian, Mohammad Reza & Moravej, Mojtaba & Doranehgard, Mohammad Hossein, 2020. "Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid," Renewable Energy, Elsevier, vol. 146(C), pages 2316-2329.
    14. Balamurali Duraivel & Natarajan Muthuswamy & Saboor Shaik & Erdem Cuce & Abdulhameed Babatunde Owolabi & Hong Xian Li & Miroslava Kavgic, 2023. "Extensive Analysis of a Reinvigorated Solar Water Heating System Using Low-Density Polyethylene Glazing," Energies, MDPI, vol. 16(16), pages 1-24, August.
    15. Islam, Md. Parvez & Morimoto, Tetsuo, 2018. "Advances in low to medium temperature non-concentrating solar thermal technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2066-2093.
    16. Pavlović, Zoran T. & Kostić, Ljiljana T., 2015. "Variation of reflected radiation from all reflectors of a flat plate solar collector during a year," Energy, Elsevier, vol. 80(C), pages 75-84.
    17. Marmoush, Mohamed M. & Rezk, Hegazy & Shehata, Nabila & Henry, Jean & Gomaa, Mohamed R., 2018. "A novel merging Tubular Daylight Device with Solar Water Heater – Experimental study," Renewable Energy, Elsevier, vol. 125(C), pages 947-961.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:28:y:2003:i:3:p:331-344. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.